|Category||Discrete => TVS (Transient Transient Voltage Suppressors)|
|Description||Pakage = DO-201 ;; Devices Marking Code= ;; Nominal Voltage(V) = 10|
|Company||Taiwan Semiconductor (TSC)|
|Datasheet||Download 1.5KE120 datasheet
|Cross ref.||Similar parts: 1.5KE120A|
|Voltage Range to 440 Volts 1500 Watts Peak Power 5.0 Watts Steady State
UL Recognized File # E-96005 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Exceeds environmental standards MIL-STD-19500 1500W surge capability 100 us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1uA above 10V High temperature soldering guaranteed: / 10 seconds /.375",(9.5mm) lead length / 5lbs.,(2.3kg) tension
a Case: Molded plastic Lead: Axial leads, solderable per MIL-STD-202, Lead: Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.94gram Dimensions in inches and (millimeters)
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Steady State Power Dissipation TL=75 °C Lead Lengths.375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) Operating and Storage Temperature Range
Notes: 4. VF=3.5V for Devices of VBR 200V and VF=5.0V Max. for Devices VBR>200V. Devices for Bipolar Applications Notes: 1. For Bidirectional Use or CA Suffix for Types 1.5KE6.8 through Types 1.5KE440. Notes: 2. Electrical Characteristics Apply in Both Directions.
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2. Notes: 2. Mounted on Copper Pad Area x 20 mm) Per Fig. 4. Notes: 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Notes: 3. Maximum.PEAK PULSE POWER (Ppp) or CURRENT (IPPM) DERATING IN PERCENTAGE, %
PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS 50% of lPPM
PM(AV), STEADY STATE POWER DISSIPATION, WATTS
HALF VALUE- lPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A.
FIG.6- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY
lFSM, PEAK FORWARD SURGE CURRENT, AMPERES
8.3ms Single Half Sine Wave JEDEC Method Tj=Tj max.
Maximum Peak Surge Current IPPM (Note 2)(Amps)
Notes: 1. VBR measured after IT applied for 300us, IT =square wave pulse or equivalent. 2. Surge current waveform per Figure 3 and derate per Figure 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35.
|Related products with the same datasheet|
|Some Part number from the same manufacture Taiwan Semiconductor (TSC)|
|1.5KE120A Pakage = DO-201 ;; Devices Marking Code= ;; Nominal Voltage(V) = 10|
FR105S : Pakage = A-405 ;; Max. Reverse Voltage VRM (V)= 600 ;; Max. Aver. Rect. Current io (A)= 1 ;; Ifsm (A)= 30
P4KE400A : Pakage = DO-41 ;; Devices Marking Code= ;; Nominal Voltage(V) = 10
P6SMB8.2C : Pakage = SMB/DO-214AA ;; Devices Marking Code= KNJ ;; Nominal Voltage(V) =
SB151W : Pakage = SB35-M ;; Max. Reverse Voltage VRM (V)= 100 ;; Max. Aver. Rect. Current io (A)= 15 ;; Ifsm (A)= 200
HER201-UF2001 : 2.0 Amps. Glass Passivated High Efficient Rectifiers
TS823CX5BRF : Microprocessor Supervisory Circuit with Watchdog Timer & Manual Reset
BZX85C12-BP : 10 V, 1.3 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-41 Specifications: Diode Type: VOLTAGE REGULATOR DIODE
BZX85C47TA2 : 43 V, 1.3 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-41 Specifications: Diode Type: VOLTAGE REGULATOR DIODE