Details, datasheet, quote on part number: SLIS-2048
PartSLIS-2048
CategorySensors => Image Sensors => CMOS
DescriptionImage Sensor in 24 Ceramic LCC Glass Lidded Package
CompanySilicon Video, Inc
DatasheetDownload SLIS-2048 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

SLIS 2048 High Speed x 1 Line Scan Image Sensor

High resolution o 2048 pixels 14,336 m imaging area 7 m pixel 7 m pixel pitch o Fill factor >99% High speed o Single-port High Speed Video o 27K lines/s 36.5 s line time at 60MHz pixel rate High sensitivity and dynamic range o 5 V/electron o 2.0-volt full scale range 63 dB dynamic range Multiple operating modes o Normal mode o Non-Destructive Readout mode o Adaptive Exposure mode Ease of application o 5.0-volt supply voltage o Interfaces or 5V logic o Digital I/O is CMOS/TTL compatible o Video output is HI-Z when imager is in DISABLE mode. o Integrated timing controller single 2X master clock Integration control signal simple mode bits

Description

The SLIS-2048 linear image sensor features an array of low dark current photo-diode pixels with performance comparable to that of most CCD's. The device includes full frame electronic shuttering, allowing simultaneous readout and integration for the highest possible frame rate at a given clock frequency. A variety of readout modes are provided to give exceptional application versatility. A key feature over traditional CCD technology is that the device can be read and reread non-destructively, allowing the user to maximize signal to noise ratio and dynamic range (available in Non-destructive Read-Out mode). Operation is simplified by on-chip logic, which requires only a clock running at two times the desired pixel read rate, and a pulse to initiate read-out. Very high throughput is possible as the imager features a high speed analog video bus to handle all 2K pixels, operating at 60 MHz pixel rate. When operating at maximum line rate, this corresponds to an instantaneous data rate 60M-Pixel / sec and an average data rate 56M-Pixel / sec. The SLIS-2048 is supplied in a ceramic leadless chip carrier package (LCC). This device is covered under U.S. Patent No. 6,084,229 and other patents pending.

Applications

Pixel Type Array Size Pixel Size / Pitch Fill Factor Imaging Area Pixel Readout Order Photo-diode 7.0 m pitch >99% Imaging sub-array: 14.336 mm

Table 2. Electro-Optical Specifications Unless otherwise specified: TAmbient = 25C, AVDD = DVDD = 5 volts, CLK @ 50% duty cycle, ZLOAD = 1.0K, Color temperature = 3000K Parameter Symbol Test Conditions Min. Typ. Max. Units Supply Voltage, Analog AVDD 5.00 5.25 Volts Supply Voltage, Digital DVDD 5.00 5.25 Volts Supply Voltage, I/O Bias IOL 3.15 5.25 Volts Supply Current, Analog mA [1] Supply Current, Digital 100 mA Power Dissipation PW Normal mode 1.15 Watts [2] Power Dissipation PWS Disable mode 500 mW Logic Input, High VIH 3.3 Volts Logic Input, Low VIL 0.8 Volts Frequency, Master Clock FCLK 120 MHz Video Output VO At Dark 3.0 Volts Video Output VO At Saturation 4.9 Volts Reference Output NO 2.5 Volts Output Voltage, at dark VDARK NO 0.0 Volts Output Voltage Swing, Full VFS NO 2.4 Volts [3] Scale [4] Noise, random en 0.9 mVrms Noise, random 180 e rms [5] Dynamic Range DB [6] Average Dark Signal ADS 0.07 %FS [7] Fixed Pattern Noise FPN 2.5 %FS MTF = 40 lp/mm 30 % Modulation Transfer [8] MCLK = 120MHz Function [9] Nonlinearity NL 15 mVrms Conversion Gain GC 5 V/e Full Well Capacity 480K e Quantum Efficiency = 600nm Image Lag IL 1.0 %FS Spectral Response 1100 nm Notes:

Lower clock speeds will result in lower DVDD power dissipation. In DISABLE mode, core analog circuitry remains active. VFS VSAT - VDARK, where VSAT is the output voltage at saturation and VDARK is the output voltage in the dark. The output voltage is defined as the difference between VO and NO. FS Full Scale. Temporal noise, en measured at dark w/30MHz video filter applied. Vrmse is equivalent to one sigma of standard deviation. Vrmse of N samples is calculated as:

DR VFS en , measured at dark ADS measured over an integration period of 10ms. Defined as a percentage of Full Scale. Fixed pattern noise measured NO in the dark Measured using PR-10 Multiburst pattern on TV Optoliner. Tint = 1.1msec. Color temperature = 3000K. Nyquist for this imager is 71.4 lp/mm. Pixel average measured from 75% of saturation, linearity error reported as RMS deviation of response to `best fit' straight line. Typical error corresponds to a linearity 99.4% of FSR.


 

Related products with the same datasheet
SLIS-2048A-LG-ES
Some Part number from the same manufacture Silicon Video, Inc
SLIS-2048A-LG-ES Image Sensor in 24 Ceramic LCC Glass Lidded Package
Same catergory

A3161ELT : Hall-effect Switch For 2-wire Applications. This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. Each device includes a voltage regulator for operation with.

AVIIVAM2CL0514 : Cameras (& Camera Modules). 512 Active Pixels, 14 m Pixel, From 20 MHZ to 60 MHZ Data Rate Camera Link Interface.

FAR-G6CS-1G9600-L252 : SAW Devices. For Mobile Communications. Date code Lot No. Pin No. Unit : mm Pin No. Pin name IN GND IN GND OUT GND OUT GND Filter 1 input pin Ground pin Filter 2 input pin Ground pin Filter 2 output pin Ground pin Filter 1 output pin Ground pin Filter No. 1 2 Passband(MHz) System AMPS-Rx PCS-Rx .

FT18 : Frame Transfer CCD Image Sensor. Product File under Image Sensors 2000 January 7 2/3-inch optical format 1M active pixels x 1024V) Progressive scan Excellent anti-blooming Variable electronic shuttering Square pixel structure Hor. and Vert. binning 100% optical fill factor High dynamic range (>60dB) High sensitivity Low dark current and fixed pattern noise Low read-out noise Data.

HB7121B : 3.3 V , 15 Mhz, CMOS Image Sensor With 8-bit ADC. is a highly integrated single chip CMOS B/W image sensor using Hynix 0.5um CMOS process developed for image application to realize high efficiency photo sensor. The sensor has 414X314 pixels total, and 400X300 pixels effective. Each pixel is high photo sensitive, small size active pixel element that converts photons to analog voltage signal. The sensor.

KLI-8023 : Linear Image Sensors. Pixels (HxV) = 8,002 X 3 ;; Pixel Size (H X Vm) = 9 X 9.

MAX6629 : 12-Bit + Sign Digital Temperature Sensors With Serial Interface. 12-Bit + Sign Digital Temperature Sensors with Serial Interface The MAX6629MAX6632 are local digital temperature sensors with an SPITM-compatible serial interface. The temperature is converted 12-bit + sign word with a resolution 0.0625C/LSB. An extended temperature range provides useful readings to +150C. These sensors are 3-wire serial interface.

STAR250 : Resolution = 512x512 ;; Format or Pitch = 25m ;; Frame Rate = 30Hz ;; Colour = B&w ;; ADC = 10b ;;.

MCP9800 : 2-Wire High-Accuracy Temperature Sensor Microchip Technology Inc.s MCP9800/1/2/3 family of digital temperature sensors converts temperatures between -55C and +125C to a digital word. They provide an accuracy of 1C (max.) from -10C to +85C. The MCP9800/1/2/3 family comes with user-programmable registers that provide flexibility for temperature.

ACS756 : Fully Integrated, Hall Effect-Based Linear Current Sensor With 3 KVRMS Voltage Isolation And A Low-Resistance Current Conductor The Allegro ACS756 family of current sensors provides economical and precise solutions for AC or DC current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation.

AT42QT1012-TSHR : Capacitive Touch Sensors One-Channel Touch Sensor IC. s: Manufacturer: Atmel ; Product Category: Capacitive Touch Sensors ; Supply Voltage: 1.8 V to 5.5 V ; Package / Case: SOT-23-6 ; Dimensions: 2.9 mm L x 1.6 mm W x 1.45 mm H ; Output Voltage: 0.6 V to 0.7 V ; Factory Pack Quantity: 4500 ; Temperature Range: - 40 C to + 85 C ; Termination Style: SMD/SMT.

XPX150D : Board Mount Pressure Sensors +/-150PSI 3V NO PORT DIFF,VAC GAGE UNAMP. » » » Pressure / Force Sensors Pressure / Force Sensors A pressure sensor transducer generates an electronic signal as a function of the pressure imposed. Pressure sensors are used for control and monitoring in thousands of everyday applications. s: Manufacturer:.

HIH-4021-001 : Board Mount Humidity Sensors - 40 C to + 85 C Humidity Sensors. » » » » Sensors for CPAP Sensors for CPAP CPAP stands for "Continuous positive airway pressure." The CPAP is a very beneficial treatment for those with sleep apnea, which is a medical condition where the airway closes off when an affected individual is in a relaxed.

SX15GD2 : Board Mount Pressure Sensors 0 to 15psid D2 DIP UNAMP GAGE 12V. » » » Pressure / Force Sensors Pressure / Force Sensors A pressure sensor transducer generates an electronic signal as a function of the pressure imposed. Pressure sensors are used for control and monitoring in thousands of everyday applications. s: Manufacturer: Honeywell.

MK03-1A66B-500W : Proximity Sensors 1 Form A Cylindrical Term. » » » Proximity Sensors Proximity Sensors A photoelectric sensor, or photoeye, is a device used to detect the distance, absence, or presence of an object by using a light transmitter (often infrared) and a photoelectric receiver. They are used extensively in industrial manufacturing. There.

E3Z-D62 : Industrial Photoelectric Sensors NPN DIFF REFLECTIVE. » » » Photoelectric Sensors Photoelectric SensorsA photoelectric sensor, or photoeye, is a device used to detect the distance, absence, or presence of an object by using a light transmitter (often infrared) and a photoelectric receiver. They are used extensively in industrial manufacturing.

EKMC1603113 : Board Mount Motion & Position Sensors 170uA 12m Digital Pearl white Lens. Panasonic Electric Works EKMC Series PaPIRS IR Motion Sensors offers detection performance of 12m. The high-density embedded circuit design eliminates external sensing circuits. Current consumption for the EKMC Series Motion Series from Panasonic is 170 µA. White, black,.

ADMP411ACEZ-RL : MEMS Microphones interim SPL microphone. s: Manufacturer: Analog Devices Inc. ; Impedance: 200 Ohms ; Operating Voltage: 1.5 V to 3.63 V ; Sensitivity: - 46 dBV ; Length: 4.72 mm ; Width: 3.76 mm ; Depth: 1 mm ; Current Rating: 180 uA ; Directional Properties: Omnidirectional ; Frequency: 28 Hz ; Maximum Operating Temperature: + 85 C ; Minimum Operating.

 
0-C     D-L     M-R     S-Z