Details, datasheet, quote on part number: TC-400-CAB-106B
PartTC-400-CAB-106B
CategoryTiming Circuits => Oscillators => TCXO (Temperature Controlled Oscillators)
DescriptionFrequency Range = 2.0MHz - 160MHz ;; Output Logic = TTL Hcmos Pecl Sine ;; Package = 20.32 X 12.70 X 10.287 ;; Features = 3.3 VDC or 5 VDC Operation
CompanyVectron International
DatasheetDownload TC-400-CAB-106B datasheet
  

 

Features, Applications
Temperature Compensated Crystal Oscillators (TCXO's) TC-400 (14/4 Single DIP Series)

Vectron International has introduced a series of Temperature Compensated Crystal Oscillators (TCXO's) available in frequencies from to 160 MHz.

Industry Standard 14/4 Single DIP package Frequency from to 160 MHz 3.3 Vdc or 5 Vdc operation All outputs Available (TTL, HCMOS, PECL, Sine)

Available from 2.0 MHz to 160 MHz 5.0 Vdc 5% 3.3 Vdc 5% Current draw will vary greatly depending on frequency and output type. For this series TCXO typical current draw will be about 15 mA. Please consult the factory about your exact current requirements. HCMOS/ACMOS 10 TTL PECL 0 dBm/50 ohm to 160 MHz to 160 MHz to 160 MHz to 77.76 MHz

Note: Not all stabilities are available with all frequency/output combinations. Please consult the factory.

x 10-6 over x 10-6 over x 10-6 over x 10-6 over x 10-6 over x 10-6 over x 10-6 over x 10-6 over to +85C

NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory.

<10 ppm for ten years +70C <0.2 ppm for a 5% change in supply voltage A = Electrical Frequency Adjust 10 ppm minimum via external voltage, 0 to Vdd - positive slope B = Tri-state HCMOS/TTL Enable/Disable PECL = No connect Initial Accuracy 2.5 ppm x 0.405")

Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Web: www.vectron.com
Output Option A Output Voh min.. Vol max. HCMOS/ACMOS 0.8 (Vdd) +0.5 Vdc 100 k ohm 5 ns max.

B 10 TTL +2.4 Vdc +0.5 Vdc 10 TTL 10 ns max. F Output Option PECL Output Vdd - 1.04 Vdc Level Vcc -1.60 Vdc Load

Product Family TC = TCXO Package = 14/4 DIP Supply Voltage = 5.0 Vdc = 3.3 Vdc 5%

Output Frequency 2.0 MHz to 160 MHz Pin 1 Options A = Electrical Frequency Adjust (Default) B = Tri-state or Enable/Disable = No Connect Temperature Range = 1.0x10-6 over = 1.5x10-6 over = 1.0x10-6 over = 1.5x10-6 over = 1.5x10-6 over 2.0x10-6 over = 1.5x10-6 over = 2.5x10-6 over to +85C

Note: Other stabilities are available upon request.

 

Related products with the same datasheet
TC-400-CAB-106A
TC-400-CAB-106C
TC-400-CAB-156A
TC-400-CAB-156B
TC-400-CAB-156C
TC-400-CAC-106A
TC-400-CAC-106B
TC-400-CAC-106C
TC-400-CAC-156A
TC-400-CAC-156B
TC-400-CAC-156C
Some Part number from the same manufacture Vectron International
TC-400-CAB-106C Frequency Range = 2.0MHz - 160MHz ;; Output Logic = TTL Hcmos Pecl Sine ;; Package = 20.32 X 12.70 X 10.287 ;; Features = 3.3 VDC or 5 VDC Operation

TC-140-BGB-4PMB : Frequency Range = 0.5MHz - 160MHz ;; Output Logic = TTL Hcmos Siave ;; Package = 38.89 X 38.89 X 13.462 ;; Features = Stratum 3 Option

TFS246K-1 : SAW Devices (Surface Acoustic Wave) Application = Gsm,dcs,pcs ;; Center Frequency = 246.0 MHZ ;; 3 DB = 160 KHZ ;; Pass Band Ripple =   ;; Insertion Loss = 7.0dB ;; Group Delay Ripple = 1.2µs ;; Package = 9 MM X 7 MM LCC

TM-055-CBC-A : Timing Modules Frequency Range = 1.544 MHZ - 777.6 MHZ ;; Output = TTL / Pecl ;; Package (mm) = 50.8 X 50.8 X 14.86 ;; Features = DDS Based

VC-410-DFF-405J : Frequency Range = 10MHz - 170MHz ;; Output = Ecl / Pecl ;; Package (mm) = Single Dip, Gull Wing or True Surface Mount FR4 ;; Features = 155.52 MHZ Prototypes Available in 2 Weeks

VXA6-1E5 : Crystal Oscillators HC-49/U 13.5 MM Tall With Top Lead

OC-290-DBB-ST3BF-10.0 : Oven Controlled Crystal Oscillators

VS-720-LFD-NBD-693.4830 : Voltage Controlled SAW Oscillator

FX-104-DFC-A3Y6 : Frequency Translator

TRU050-GKCHA-1M0000000 : Complete VCXO Based Phase-locked Loop

 
0-C     D-L     M-R     S-Z