Details, datasheet, quote on part number: THS6043CD
CategoryAnalog & Mixed-Signal Processing => Amplifiers => High Speed/Video Amplifiers => Line Drivers and Receivers
TitleLine Drivers and Receivers
Descriptionti THS6043, 350-mA, +/-12V Adsl Cpe Line Driver With Shutdown
CompanyTexas Instruments, Inc.
DatasheetDownload THS6043CD datasheet
Find where to buy


Features, Applications

Ideal for Both Full Rate ADSL and G.Lite Compatible With 1:1 Transformer Ratio Low 2.1 pA/Hz Noninverting Current Noise Reduces Noise Feedback Through Hybrid Into Downstream Channel Wide Supply Voltage Range V Ideal for 12-V Operation Wide Output Swing 43-Vpp Differential Output Voltage, RL 12-V Supply High Output Current 350 mA (typ)


120 MHz (3 dB, V, RL V/s Slew Rate 12 V) Low Distortion, Single-Ended, G dBc (250 kHz, 2 Vpp, 100- load) Low Power Shutdown 300-A Total Standby Current Thermal Shutdown and Short-Circuit Protection Standard SOIC, SOIC PowerPAD and TSSOP PowerPAD Package Evaluation Module Available


The is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a 12-V supply voltage while drawing only mA of supply current per channel. It offers low 79 dBc total harmonic distortion driving a 100- load (2 Vpp). The THS6042/3 offers a high 43-Vpp differential output swing across a 200- load from a 12-V supply. The THS6043 features a low-power shutdown mode, consuming only 300 A quiescent current per channel. The THS6042/3 is packaged in standard SOIC, SOIC PowerPAD, and TSSOP PowerPAD packages.

+12 V VI+ _ THS6042 Driver 750 THS6042 Driver dBm Delivered to Telephone Line DEVICE RELATED PRODUCTS DESCRIPTION

175-mA, 12 ADSL CPE line driver +12 V ADSL CPE line driver +12 V ADSL CPE line driver 5 V Low noise ADSL receiver 5 V Low noise ADSL receiver

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.


absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage, VCC+ to VCC. 33 V Input voltage. VCC Output current (see Note 450 mA Differential input voltage. 4 V Maximum junction temperature. 150C Total power dissipation at (or below) 25C free-air temperature. See Dissipation Ratings Table Operating free-air temperature, TA: Commercial. to 70C Industrial. to 85C Storage temperature, Tstg : Commercial. to 125C Industrial. to 125C Lead temperature mm (1/16 inch) from case for 10 seconds. 300C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The THS6042 and THS6043 may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipating plane for proper power dissipation. Failure do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI Technical Brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package. DISSIPATION RATING TABLE PACKAGE D-8 DDA D-14 PWP = 150C POWER RATING 1.88 W

3.3 W This data was taken using the JEDEC proposed high-K test PCB. For the JEDEC low-K test PCB, the JA is168C/W for the D8 package and 122.3C/W for the D14 package.

MIN Dual supply Supply voltage voltage, VCC+ to VCC Operating free-air free air temperature, temperature TA Single supply C-suffix I-suffix NOM MAX UNIT V C

electrical characteristics over recommended operating free-air temperature range, = 25C, VCC 12 V, R(FEEDBACK) = 100 (unless otherwise noted)

NOTE 2: Slew rate is defined from the 25% to the 75% output levels.

PARAMETER Total harmonic distortion (single-ended configuration) (RF 390 ) Input voltage noise +Input In Input current noise Input TEST CONDITIONS 100 , VCC = 250 kHz = 4, VCC = 250 kHz VO(pp) 2 V VO(pp) 16 V VO(pp) 2 V VO(pp) 10 kHz = 10 kHz MIN TYP = 2 Vpp, Vpp G dBc nV/Hz pA/Hz dBc MAX UNIT


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
THS6043CDR ti THS6043, 350-mA, +/-12V Adsl Cpe Line Driver With Shutdown
THS6052CD ti THS6052, 175-mA, +/-12V Adsl Cpe Line Driver
THS6053CD ti THS6053, 175-mA, +/-12V Adsl Cpe Line Driver With Shutdown
THS6062 Low-noise Adsl Dual Differential Receiver
THS6062CD ti THS6062, Low-noise Adsl Dual Differential Receiver
THS6062D Low-noise Adsl Dual Differential Receiver
THS6062ID ti THS6062, Low-noise Adsl Dual Differential Receiver
THS6072 Low-power Adsl Differential Receiver
THS6072CD ti THS6072, Low-power Adsl Differential Receiver
THS6072D Low-power Adsl Differential Receiver
THS6072ID ti THS6072, Low-power Adsl Differential Receiver
THS6092CD ti THS6092, 275-mA, +12V Adsl Cpe Line Driver
THS6093CD ti THS6093, 275-mA, +12V Adsl Cpe Line Driver With Shutdown
THS6132 High Efficiency Class-g Adsl Line Driver
THS6132RGWR ti THS6132, High Efficiency Class-g Adsl Line Driver
THS6132VFP High Efficiency Class-g Adsl Line Driver

DAC7641 :

SN65LVDS101 : 2Gbps Lvds/lvpecl/cml to Lvpecl Repeater/translator

SN74LVC16543DL : Registered Transceivers ti SN74LVC16543, 16-Bit Registered Transceiver With 3-State Outputs

TLC549IP : ti TLC549, 8-Bit, 40 KSPS ADC Serial Out, Low Power, Compatible to TLC540/545/1540, Single Ch.

TPS79015 :

LM3S6918-EQC50-A2T : Embedded - Microcontroller Integrated Circuit (ics) Internal Tray 2.25 V ~ 2.75 V; IC ARM CORTEX MCU 256KB 100-LQFP Specifications: Program Memory Size: 256KB (256K x 8) ; RAM Size: 64K x 8 ; Number of I /O: 38 ; Package / Case: 100-LQFP ; Speed: 50MHz ; Oscillator Type: Internal ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: ARM Cortex-M3 ; Data Converters: A/D 8x10b ; Core S

CD4009UBPWE4 : Logic - Gate And Inverter Integrated Circuit (ics) Inverter Tube 3mA, 36mA 3 V ~ 18 V; IC HEX INVERT BUFF/CONV 16-TSSOP Specifications: Number of Circuits: 6 ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Logic Type: Inverter ; Packaging: Tube ; Mounting Type: Surface Mount ; Number of Inputs: 1 ; Current - Output High, Low: 3mA, 36mA ; Operating Temperature: -55C ~ 125C ; Voltage - Supply: 3 V ~ 18 V ; Lead F

TPS22913BYZVT : Pmic - Power Distribution Switch Integrated Circuit (ics) High Side Switch Tape & Reel (TR) 2A 1.4 V ~ 5.5 V; IC LOAD SWITCH 5V 4DSBGA Specifications: Type: High Side Switch ; Number of Outputs: 1 ; Voltage - Input: 1.4 V ~ 5.5 V ; Package / Case: 4-XFBGA, DSBGA ; Packaging: Tape & Reel (TR) ; Current Limit: 2A ; Internal Switch(s): Yes ; Operating Temperature: -40C ~ 85C ; Rds (On): 80 mOhm ; Lead Free Status: Lead Free ; Ro

MSP430G2202IPW20R : Embedded - Microcontroller Integrated Circuit (ics) Internal Tape & Reel (TR) 1.8 V ~ 3.6 V; IC MCU 16BIT 2KB FLASH 20TSSOP Specifications: Program Memory Size: 2KB (2K x 8) ; RAM Size: 256 x 8 ; Number of I /O: 16 ; Package / Case: 20-TSSOP (0.173", 4.40mm Width) ; Speed: 16MHz ; Oscillator Type: Internal ; Packaging: Tape & Reel (TR) ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: RISC ; Data Conver

SN74LV32ADBRG4 : ti SN74LV32A, Quadruple 2-Input Positive-OR GATEs

LM43602PWPT : IC REG BUCK ADJ 2A SYNC 16HTSSOP Texas Instruments' LM43602 SIMPLE SWITCHER regulator is an easy-to-use synchronous step-down DC-DC converter capable of driving up to 2 A of load current from an input voltage ranging of 3.5 V to 36 V (42 V absolute maximum). The LM43602 provides exceptional efficiency, output accuracy, and

Same catergory

ADV7176 : Digital Video Encoder. Integrated Digital CCIR-601 YCrCb to PAL/NTSC Video Encoder ADV7175/ADV7176 Close Captioning Support Teletext Support (Passthrough Mode) On-Board Color Bar Generation On-Board Voltage Reference 2-Wire Serial MPU Interface (I2C Compatible) +5 V CMOS Monolithic Construction 44-Pin PQFP Thermally Enhanced Package APPLICATIONS MPEG-1 and MPEG-2 Video DVD Digital.

EL5144C : 100MHZ Single Supply Rail to Rail Amplifier. The EL5144C series amplifiers are voltage feedback, high speed, rail to rail amplifiers designed to operate on a single +5V supply. They offer unity gain stability with an unloaded 3dB bandwidth of 100 MHz. The input common mode voltage range extends from the negative rail to within 1.5V of the positive rail. Driving a 75 double terminated coaxial.

HA1-2557883 : Wideband Four Quadrant Analog Multiplier ( Current Output ). Wideband Four Quadrant Analog Multiplier (Current Output) The is a monolithic, high speed, four quadrant, analog multiplier constructed in Intersil' Dielectrically Isolated High Frequency Process. The single-ended current output of the HA-2557/883 has a 130MHz signal bandwidth (RL = 50). High bandwidth and low distortion make this part an ideal component.

LM1458C : Dual Operational Amplifier. Internal frequency compensation Short circuit protecion Large common mode and differential voltage range No latch up Low power consumption The LM1458/LM1458C series are dual general purpose operational amplifiers, having short circuits protected and require no external components for frequency compensation. High common mode voltage range and absence.

LM219 : High Speed Dual Comparator. The LM119 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input currents than devices like the LM710. The uncommitted collector of the output stage makes the LM119.

LTC1047 : LTC1047, Dual Micropower Zero-drift Operational Amplifier With Internal Capacitors.

ML2009CP : Compatible Logarithmic Gain/attenuator. The ML2008 and ML2009 are digitally controlled logarithmic gain/attenuators with a range in 0.1dB steps. Easy interface to microprocessors is provided by an input latch and control signals consisting of chip select and write. The interface for gain setting of the an 8-bit data word, while the ML2009 is designed to interface a 16-bit data bus with a single.

MPS4125 : Amplifier Transistors. Rating Collector Emitter Voltage Collector Base Voltage Emitter Base Voltage Collector Current Continuous Total Power Dissipation = 25C Derate above 25C Total Power Dissipation = 25C Derate above 25C Operating and Storage Junction Temperature Range Symbol VCE VCB VEB IC PD TJ, Tstg MPS4126 25 Unit Vdc mAdc mW mW/C W mW/C C Characteristic.

NJM2233BD : 2-input Single Video Switch.

THS6093CD : Line Drivers and Receivers. ti THS6093, 275-mA, +12V Adsl Cpe Line Driver With Shutdown.

TLC27L2B : Linear CMOS Dual op Amp: Dual. Trimmed Offset Voltage: 500 V Max at 25C, VDD 5 V Input Offset Voltage Drift. Typically 0.1 V/Month, Including the First 30 Days Wide Range of Supply Voltages Over Specified Temperature Range: 16 V Single-Supply Operation Common-Mode Input Voltage Range Extends Below the Negative Rail (C-Suffix, I-Suffix Types) Ultra-Low Power. Typically at 25C,.

TLE207XA : Single. Excalibur Low-noise High-speed JFET-input op Amps. TLE207xA, TLE207xY EXCALIBUR LOW-NOISE HIGH-SPEED JFET-INPUT OPERATIONAL AMPLIFIERS Direct Upgrades TL05x, TL07x, and TL08x BiFET Operational Amplifiers Greater Than 2 Bandwidth (10 MHz) and 3 Slew Rate (45 V/s) Than TL07x Ensured Maximum Noise Floor 17 nV/Hz On-Chip Offset Voltage Trimming for Improved DC Performance Wider Supply Rails Increase.

XU309 : N-channel JFET High Frequency Amplifier. ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) Gate-Drain or Gate-Source Voltage. -25V Gate Current. 20mA Storage Temperature. to +200oC Operating Temperature Range. to +150oC Lead Temperature (Soldering, 10sec). +300oC Power Dissipation. 500mW Derate above 4mW/ oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause.

sc06139 : High-Side Measurement Current-Shunt Monitor with Dual Comparators The INA206, INA207, and INA208 are a family of high-side, current-shunt monitors with voltage output, dual comparators, and voltage reference. The INA206, INA207, and INA208 can sense drops across shunts at common-mode voltages from -16V to +80V. The INA206, INA207, and INA208 are available.

0-C     D-L     M-R     S-Z