Details, datasheet, quote on part number: THS6042IDDAR
CategoryAnalog & Mixed-Signal Processing => Amplifiers => High Speed/Video Amplifiers => Line Drivers and Receivers
TitleLine Drivers and Receivers
Descriptionti THS6042, 350-mA, +/-12V Adsl Cpe Line Driver
CompanyTexas Instruments, Inc.
DatasheetDownload THS6042IDDAR datasheet
Find where to buy


Features, Applications

Ideal for Both Full Rate ADSL and G.Lite Compatible With 1:1 Transformer Ratio Low 2.1 pA/Hz Noninverting Current Noise Reduces Noise Feedback Through Hybrid Into Downstream Channel Wide Supply Voltage Range V Ideal for 12-V Operation Wide Output Swing 43-Vpp Differential Output Voltage, RL 12-V Supply High Output Current 350 mA (typ)


120 MHz (3 dB, V, RL V/s Slew Rate 12 V) Low Distortion, Single-Ended, G dBc (250 kHz, 2 Vpp, 100- load) Low Power Shutdown 300-A Total Standby Current Thermal Shutdown and Short-Circuit Protection Standard SOIC, SOIC PowerPAD and TSSOP PowerPAD Package Evaluation Module Available


The is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from a 12-V supply voltage while drawing only mA of supply current per channel. It offers low 79 dBc total harmonic distortion driving a 100- load (2 Vpp). The THS6042/3 offers a high 43-Vpp differential output swing across a 200- load from a 12-V supply. The THS6043 features a low-power shutdown mode, consuming only 300 A quiescent current per channel. The THS6042/3 is packaged in standard SOIC, SOIC PowerPAD, and TSSOP PowerPAD packages.

+12 V VI+ _ THS6042 Driver 750 THS6042 Driver dBm Delivered to Telephone Line DEVICE RELATED PRODUCTS DESCRIPTION

175-mA, 12 ADSL CPE line driver +12 V ADSL CPE line driver +12 V ADSL CPE line driver 5 V Low noise ADSL receiver 5 V Low noise ADSL receiver

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.


absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage, VCC+ to VCC. 33 V Input voltage. VCC Output current (see Note 450 mA Differential input voltage. 4 V Maximum junction temperature. 150C Total power dissipation at (or below) 25C free-air temperature. See Dissipation Ratings Table Operating free-air temperature, TA: Commercial. to 70C Industrial. to 85C Storage temperature, Tstg : Commercial. to 125C Industrial. to 125C Lead temperature mm (1/16 inch) from case for 10 seconds. 300C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The THS6042 and THS6043 may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipating plane for proper power dissipation. Failure do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI Technical Brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package. DISSIPATION RATING TABLE PACKAGE D-8 DDA D-14 PWP = 150C POWER RATING 1.88 W

3.3 W This data was taken using the JEDEC proposed high-K test PCB. For the JEDEC low-K test PCB, the JA is168C/W for the D8 package and 122.3C/W for the D14 package.

MIN Dual supply Supply voltage voltage, VCC+ to VCC Operating free-air free air temperature, temperature TA Single supply C-suffix I-suffix NOM MAX UNIT V C

electrical characteristics over recommended operating free-air temperature range, = 25C, VCC 12 V, R(FEEDBACK) = 100 (unless otherwise noted)

NOTE 2: Slew rate is defined from the 25% to the 75% output levels.

PARAMETER Total harmonic distortion (single-ended configuration) (RF 390 ) Input voltage noise +Input In Input current noise Input TEST CONDITIONS 100 , VCC = 250 kHz = 4, VCC = 250 kHz VO(pp) 2 V VO(pp) 16 V VO(pp) 2 V VO(pp) 10 kHz = 10 kHz MIN TYP = 2 Vpp, Vpp G dBc nV/Hz pA/Hz dBc MAX UNIT


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
THS6042IDR ti THS6042, 350-mA, +/-12V Adsl Cpe Line Driver
THS6043CD ti THS6043, 350-mA, +/-12V Adsl Cpe Line Driver With Shutdown
THS6052CD ti THS6052, 175-mA, +/-12V Adsl Cpe Line Driver
THS6053CD ti THS6053, 175-mA, +/-12V Adsl Cpe Line Driver With Shutdown
THS6062 Low-noise Adsl Dual Differential Receiver
THS6062CD ti THS6062, Low-noise Adsl Dual Differential Receiver
THS6062D Low-noise Adsl Dual Differential Receiver
THS6062ID ti THS6062, Low-noise Adsl Dual Differential Receiver
THS6072 Low-power Adsl Differential Receiver
THS6072CD ti THS6072, Low-power Adsl Differential Receiver
THS6072D Low-power Adsl Differential Receiver
THS6072ID ti THS6072, Low-power Adsl Differential Receiver
THS6092CD ti THS6092, 275-mA, +12V Adsl Cpe Line Driver
THS6093CD ti THS6093, 275-mA, +12V Adsl Cpe Line Driver With Shutdown
THS6132 High Efficiency Class-g Adsl Line Driver

CD74HC251M : Multiplexers ti CD74HC251, High Speed CMOS Logic 8-Input Multiplexer With 3-State Outputs

SN74LS137D : Decoders ti SN74LS137, 3-line to 8-line Decoder / Demultiplexer With Address Latches

SN74LVCH32244AGKER : Non-Inverting Buffers and Drivers ti SN74LVCH32244A, 32-Bit Buffer/driver With 3-State Outputs

TPS3600X25PW : Battery-backup Supervisor FOR Low-power Processors

TPS719185-15DRVT : Dual, 200ma Output, Low Noise, High PSRR Low-dropout Linear Regulators

TRF3703_07 : 0.4-ghz TO 4-ghz Quadrature Modulator

TLV247X-Q1 : Family OF 600a/ch 2.8mhz Rail-to-rail Input/output High-drive Operational Amplifiers WITH Shutdown

CY74FCT841ATSOCG4 : D-Type (3-State) Latches ti CY74FCT841T, 10-Bit Bus-interface D-type Latches With 3-State Outputs

SN74AUP2G34DRYR : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tape & Reel (TR) 4mA, 4mA 0.8 V ~ 3.6 V; IC BUFF/DVR DUAL LP SC70-6 Specifications: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: 6-TSSOP, SC-88, SOT-363 ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Bits per Element: 1 ; Number of Elements: 2 ; Operating Temperature: -40C ~ 85C ; Voltage - Supply: 0.8 V ~ 3.6 V ; C

UCC3921D/81143 : Pmic - Hot Swap Integrated Circuit (ics) Hot-Swap Controller Tube - -; IC NEG FLOATING PWR MGR 8SOIC Specifications: Applications: General Purpose ; Type: Hot-Swap Controller ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Current Limit: - ; Internal Switch(s): No ; Operating Temperature: 0C ~ 70C ; Voltage - Supply: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Complian

MSP430FR5949IRHAT : 16-bit Microcontrollers - MCU Ultra low power Micro Controller

0-C     D-L     M-R     S-Z