|Category||Semiconductors => Data Converters => Digital-to-Analog Converters (DACs) => High Speed DACs (>10MSPS)|
|Part family||THS5671A 14-Bit, 125-MSPS Digital-to-Analog Converter (DAC)|
|Description||14-Bit, 125-MSPS Digital-to-Analog Converter (DAC) 28-SOIC -40 to 85|
|Company||Texas Instruments, Inc.|
|Datasheet||Download THS5671A datasheet
|Cross ref.||Similar parts: ISL5961IA, ISL5961IAZ, ISL5961IB, ISL5961IBZ, AD9764AR, AD9764ARRL, AD9764ARU, AD9764ARURL7, AD9764ARUZ, AD9764ARUZRL7|
|Sample / Update Rate(MSPS)||125|
|Operating Temperature Range(C)||-40 to 85|
|Approx. Price (US$)||9.83 | 1ku|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|• Wideband Complementary Current Output DAC Single-Ended Interface
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps | Doc
|• Noise Analysis for High Speed Op Amps (Rev. A)
As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predic | Doc
|THS5671EVM: THS5671A Evaluation Module|
|TSW2200EVM: TSW2200 Low-Cost Portable Power Supply Evaluation Module|
Member of the Pin-Compatible CommsDAC Product Family 125 MSPS Update Rate 14-Bit Resolution Spurious Free Dynamic Range (SFDR) to Nyquist at 40 MHz Output: 63 dBc 1 ns Setup/Hold Time Differential Scalable Current Outputs: 20 mA On-Chip 1.2 V Reference 3 V and 5 V CMOS-Compatible Digital Interface Straight Binary or Twos Complement Input Power Dissipation: 5 V, Sleep Mode: 5 V Package: 28-Pin SOIC and TSSOPSOIC (DW) OR TSSOP (PW) PACKAGE (TOP VIEW)
CLK DVDD DGND MODE AVDD IOUT1 IOUT2 AGND COMP1 BIASJ EXTIO EXTLO SLEEP
The a 14-bit resolution digital-to-analog converter (DAC) specifically optimized for digital data transmission in wired and wireless communication systems. The 14-bit DAC is a member of the CommsDAC series of high-speed, low-power CMOS digital-to-analog converters. The CommsDAC family consists of pin compatible 12-, 10-, and 8-bit DACs. All devices offer identical interface options, small outline package, and pinout. The THS5671A offers superior ac and dc performance while supporting update rates to 125 MSPS. The THS5671A operates from an analog supply 5.5 V. Its inherent low power dissipation 175 mW ensures that the device is well-suited for portable and low-power applications. Lowering the full-scale current output reduces the power dissipation without significantly degrading performance. The device features a SLEEP mode, which reduces the standby power to approximately 25 mW, thereby optimizing the power consumption for system needs. The THS5671A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array architecture combined with simultaneous switching shows excellent dynamic performance. On-chip edge-triggered input latches and 1.2 V temperature-compensated bandgap reference provide a complete monolithic DAC solution. The digital supply range 5.5 V supports 3 V and 5 V CMOS logic families. Minimum data input setup and hold times allow for easy interfacing with external logic. The THS5671A supports both a straight binary and twos complement input word format, enabling flexible interfacing with digital signal processors. The THS5671A provides a nominal full-scale differential output current 20 mA and >300 k output impedance, supporting both single-ended and differential applications. The output current can be directly fed to the load (e.g., external resistor load or transformer), with no additional external output buffer required. An accurate on-chip reference and control amplifier allows the user to adjust this output current from 20 mA down to 2 mA, with no significant degradation of performance. This reduces power consumption and provides 20 dB gain range control capabilities. Alternatively, an external reference voltage and control amplifier may be applied in applications using a multiplying DAC. The output voltage compliance range 1.25 V.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. CommsDAC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
The THS5671A is available in both a 28-pin SOIC and TSSOP package. The device is characterized for operation over the industrial temperature range to 85°C.
C1 SLEEP EXTLO 1.2 V REF 1 nF EXTIO CEXT 2 k RBIAS BIASJ I BIAS DVDD D[13:0] Logic Control + Control AMP 0.1 µF AVDD
TERMINAL NAME AGND AVDD BIASJ CLK COMP2 D[13:0] DGND DVDD EXTIO NO. I/O DESCRIPTION Analog ground return for the internal analog circuitry Positive analog supply voltage 5.5 V) Full-scale output current bias External clock input. Input data latched on rising edge of the clock. Compensation and decoupling node, requires 0.1 µF capacitor to AVDD. Internal bias node, requires 0.1 µF decoupling capacitor to AGND. Data bits 0 through D13 is most significant data bit (MSB), D0 is least significant data bit (LSB). Digital ground return for the internal digital logic circuitry Positive digital supply voltage 5.5 V) Used as external reference input when internal reference is disabled (i.e., EXTLO = AVDD). Used as internal reference output when EXTLO = AGND, requires 0.1 µF decoupling capacitor to AGND when used as reference output. Internal reference ground. Connect to AVDD to disable the internal reference source. DAC current output. Full scale when all input bits are set 1 Complementary DAC current output. Full scale when all input bits are 0 Mode select. Internal pulldown. Mode 0 is selected if this pin is left floating or connected to DGND. See timing diagram. Asynchronous hardware power down input. Active high. Internal pulldown. Requires µs to power down but ms to power up.absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage range, AVDD (see Note 6.5 V DVDD (see Note 6.5 V Voltage between AGND and DGND. 0.5 V Supply voltage range, AVDD to DVDD. 6.5 V CLK, SLEEP, MODE (see Note V to DVDD 0.3 V Digital input D13D0 (see Note V to DVDD IOUT1, IOUT2 (see Note V to AVDD COMP1, COMP2 (see Note V to AVDD 0.3 V EXTIO, BIASJ (see Note V to AVDD 0.3 V EXTLO (see Note 0.3 V Peak input current (any input). 20 mA Peak total input current (all inputs). 30 mA Operating free-air temperature range, TA: to 85°C Storage temperature range. to 150°C Lead temperature mm (1/16 inch) from the case for 10 seconds. 260°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Measured with respect to AGND. 2. Measured with respect to DGND.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|THS5671ADW 14-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5671AI 14-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter|
|THS5671AIDW ti THS5671A, 14-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA|
|THS5671APW 14-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5671EVM 14-BIT, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2MA to 20MA, 3V & 5V Digital I/f|
|THS6002 Dual Differential Line Drivers And Receivers|
|THS6002CDWP ti THS6002, Dual Differential Line Driver/receiver|
|THS6002DWP Dual Differential Line Drivers And Receivers|
|THS6002IDWP ti THS6002, Dual Differential Line Driver/receiver|
|THS6007CPWP ti THS6007, Dual Differential Line Drivers And Low-power Receivers|
|THS6012 500-ma Dual Differential Line Driver|
|THS6012CDWP ti THS6012, 500-mA Dual Differential Line Driver|
|THS6012CGQE 500-ma Dual Differential Line Driver|
|THS6012IDWP ti THS6012, 500-mA Dual Differential Line Driver|
|THS6012IGQE 500-ma Dual Differential Line Driver|
|THS6012IGQER ti THS6012, 500-mA Dual Differential Line Driver|
|THS6022 250-ma Dual Differential Line Driver|
BQ2201SNN : SRAM Nonvolatile Controller Unit
SN54BCT574FK : Octal Edge-triggered D-type Flip-flops With 3-state Outputs
SN74ALS645AN3 : Standard Transceivers ti SN74ALS645A, Octal Bus Transceivers With 3-State Outputs
SNJ54LS03FK : ti SN54LS03, Quadruple 2-Input Positive-nand Gates With Open-collector Output
TPS2345PWR : External FET ti TPS2345, Compactpci Hot Swap Power Manager Industrial Temp ic That Meets The Picmg Standard
BQ2084DBT-V143 : The bq2084-V143 SBS-compliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in Li-ion or Li-polymer batteries. The bq2084-V143 monitors capacity and other critical parameters of the battery pack and reports the information to the system host
HC153 : DUAL 4-line TO 1-line DATA Selectors/multiplexers
SN54ACT10_03 : Test-bus Controllers IEEE STD 1149.1 (jtag) TAP Masters WITH 16-bit Generic HOST Interfaces
TMS28F004AMT70CDCDL : 4194304-bit Synchronous Flash Memory
74ACT16823DLRG4 : D-Type (3-State) Flip-Flops ti 74ACT16823, 18-Bit Bus-interface Flip-flops With 3-State Outputs
TPS54620RHLR : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) Yes 0.8 V ~ 15V; IC BUCK SYNC ADJ 6A 14QFN Specifications: Type: Step-Down (Buck) ; Output Type: Adjustable ; PWM Type: Current Mode ; Synchronous Rectifier: Yes ; Number of Outputs: 1 ; Voltage - Output: 0.8 V ~ 15V ; Current - Output: 6A ; Frequency - Switching: 200kHz ~ 1.6MHz ; Voltage - Input: 4.5 V ~ 17 V ; Lead Free Status: Lead Free
AD673 : 8-bit A/D Converter. Complete 8-Bit A/D Converter with Reference, Clock and Comparator 30 s Maximum Conversion Time Full or 16-Bit Microprocessor Bus Interface Unipolar and Bipolar Inputs No Missing Codes Over Temperature Operates +5 V and 15 V Supplies MIL-STD-883 Compliant Version Available The is a complete 8-bit successive approximation analog-to-digital converter.
AD7547AQ : Lc2mos Parallel Loading Dual 12-bit DAC.
AD7873 : Touch Screen Digitizer With Direct Battery And Touch-pressure Measurement.
ADS1213E : ti ADS1213, 22-Bit Analog-to-digital Converter. q DELTA-SIGMA A/D CONVERTER q 22 BITS NO MISSING CODES q 20 BITS EFFECTIVE RESOLUTION AT 10Hz AND 16 BITS 1000Hz q LOW POWER: 1.4mW q DIFFERENTIAL INPUTS q PROGRAMMABLE GAIN AMPLIFIER q SPI COMPATIBLE SSI INTERFACE q PROGRAMMABLE CUTOFF FREQUENCY 6.25kHz q INTERNAL/EXTERNAL REFERENCE q ON-CHIP SELF-CALIBRATION q ADS1213 INCLUDES 4-CHANNEL MUX The ADS1212.
ADS7841E : ti ADS7841, 12-Bit, 4-Channel Serial Output Sampling Analog-to-digital Converter.
ADS808Y/250 : ti ADS808, 12-Bit, 70 MSPS ADC SE/Diff, Int/ext Ref., Flexible Clocking, Selectable Fullscale Range & Powerdown.
DAC0800 : DAC0800 - 8-Bit D/A Converter, Package: Soic Narrow, Pin Nb=16. The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over to 1 reference current range is possible. The DAC0800 series also high compliance complementary current outputs to allow differential output voltages.
DAC8571IDGK : ti DAC8571, Low-power Rail-to-rail Output 16-Bit I2C Input DAC. 16-BIT, LOW POWER, VOLTAGE OUTPUT, I2C INTERFACE DIGITAL-TO-ANALOG CONVERTER Micropower Operation: 5 V Power-On Reset to Zero Single Supply: V 16-Bit Monotonic Settling Time: to ±0.003% FSR I2CTM Interface With High-Speed Mode Supports Data Receive and Transmit On-Chip Rail-to-Rail Output Buffer Double-Buffered Input Register Supports Synchronous Multichannel.
LTC1329 : Current Output. LTC1329-10, Micropower 10uA Current Output, Serial/pulse Mode Interface, SO-8.
LTC1402 : ->Single Input. LTC1402 5V or +/-5V, 2.2Msps, SSOP-16, Serial Interface.
LTC1650 : Voltage Output. LTC1650, +/-5V, 16-Bit, 0.5LSB Dnl, Low Glitch, Fast Settling, Serial, SO-16.
MAX1171 : 12-bit, 20msps, Ttl-output ADC. o Monolithic, 12-Bit, 20Msps Converter o On-Chip Track/Hold o ±2.0V Analog Input Range o 66dB SNR at 1MHz Input o Low Power: o 5pF Input Capacitance o TTL-Compatible Outputs The MAX1171 analog-to-digital converter (ADC) a 12-bit monolithic ADC capable of sample rates greater than 20Msps. An on-board input buffer and track/hold function ensure excellent.
MAX6841 : MAX6841, MAX6842, MAX6843, MAX6844, MAX6845 Ultra-low-voltage µP Reset Circuits And Voltage Detectors.
THS14F03IPFB : ti THS14F03, 14-bit, 3 MSPS ADC With 32-word Fifo. 14-BIT, 1 MSPS/ 3 MSPS, DSP COMPATIBLE, ANALOG-TO-DIGITAL CONVERTERS WITH FIFO INTERNAL REFERENCE AND PGA applications 14-Bit Resolution 1 MSPS and 3 MSPS Speed Grades Available On-Chip FIFO For Optimized Data Transfer Differential Nonlinearity (DNL) ±0.6 LSB Typ Integral Nonlinearity (INL) ±1.5 LSB Typ Internal Reference Differential Inputs Programmable.
TLV320DAC23GQE : Audio DACs. ti TLV320DAC23, Low-Power, Portable Audio Converter. Stereo Audio D/A Converter, to 96kHz With Integrated Headphone Amplifier Section 1 Title Page Introduction. 11 1.1 . 12 1.2 Functional Block Diagram. 13 1.3 Terminal Assignments. 14 1.4 Ordering Information. 15 1.5 Terminal Functions. 16 2 s. 21 2.1 Absolute Maximum Ratings Over Operating Free-Air Temperature Range. 21 2.2 Recommended Operating.
DAC8806 : The DAC8806, a multiplying digital-to-analog converter (DAC), is designed to operate from a single 2.7V to 5.5V supply. The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, voltage-to-current.
AD5624 : 2.7 V to 5.5 V, 450 µA, Rail-to-Rail Output, Quad, 12-/16-Bit nanoDACs® The AD5624/AD5664, members of the nanoDAC family, are low power, quad, 12-, 16-bit buffered voltage-out DACs that operate from a single 2.7 V to 5.5 V supply and are guaranteed monotonic by design. The AD5624/AD5664 require an external reference voltage to set the output range of the DAC.