Details, datasheet, quote on part number: THS5661ADW
CategoryData Conversion => Multiplying Data Converters
Description12-bit, 125 Msps, Commsdace Digital-to-analog Converter
CompanyTexas Instruments, Inc.
DatasheetDownload THS5661ADW datasheet
Find where to buy


Features, Applications

Member of the Pin-Compatible CommsDACTM Product Family 125 MSPS Update Rate 12-Bit Resolution Spurious Free Dynamic Range (SFDR) to Nyquist at 40 MHz Output: 60 dBc 1 ns Setup/Hold Time Differential Scalable Current Outputs: 20 mA On-Chip 1.2 V Reference 3 V and 5 V CMOS-Compatible Digital Interface Straight Binary or Twos Complement Input Power Dissipation: 5 V, Sleep Mode: 5 V Package: 28-Pin SOIC and TSSOP


The a 12-bit resolution digital-to-analog converter (DAC) specifically optimized for digital data transmission in wired and wireless communication systems. The 12-bit DAC is a member of the CommsDAC series of high-speed, low-power CMOS digital-to-analog converters. The CommsDAC family consists of pin compatible 12-, 10-, and 8-bit DACs. All devices offer identical interface options, small outline package, and pinout. The THS5661A offers superior ac and dc performance while supporting update rates to 125 MSPS. The THS5661A operates from an analog supply 5.5 V. Its inherent low power dissipation 175 mW ensures that the device is well-suited for portable and low-power applications. Lowering the full-scale current output reduces the power dissipation without significantly degrading performance. The device features a SLEEP mode, which reduces the standby power to approximately 25 mW, thereby optimizing the power consumption for system needs. The THS5661A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array architecture combined with simultaneous switching shows excellent dynamic performance. On-chip edge-triggered input latches and 1.2 V temperature-compensated bandgap reference provide a complete monolithic DAC solution. The digital supply range 5.5 V supports 3 V and 5 V CMOS logic families. Minimum data input setup and hold times allow for easy interfacing with external logic. The THS5661A supports both a straight binary and twos complement input word format, enabling flexible interfacing with digital signal processors. The THS5661A provides a nominal full-scale differential output current 20 mA and >300 k output impedance, supporting both single-ended and differential applications. The output current can be directly fed to the load (e.g., external resistor load or transformer), with no additional external output buffer required. An accurate on-chip reference and control amplifier allows the user to adjust this output current from 20 mA down to 2 mA, with no significant degradation of performance. This reduces power consumption and provides 20 dB gain range control capabilities. Alternatively, an external reference voltage and control amplifier may be applied in applications using a multiplying DAC. The output voltage compliance range 1.25 V.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. CommsDAC is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The THS5661A is available in both a 28-pin SOIC and TSSOP package. The device is characterized for operation over the industrial temperature range to 85C.

C1 SLEEP EXTLO 1.2 V REF 1 nF EXTIO CEXT 2 k RBIAS DVDD D[11:0] Logic Control 50 RLOAD BIASJ I BIAS + Control AMP 0.1 F AVDD

TERMINAL NAME AGND AVDD BIASJ CLK COMP2 D[11:0] DGND DVDD EXTIO NO. I/O DESCRIPTION Analog ground return for the internal analog circuitry Positive analog supply voltage 5.5 V) Full-scale output current bias External clock input. Input data latched on rising edge of the clock. Compensation and decoupling node, requires 0.1 F capacitor to AVDD. Internal bias node, requires 0.1 F decoupling capacitor to AGND. Data bits 0 through D11 is most significant data bit (MSB), D0 is least significant data bit (LSB). Digital ground return for the internal digital logic circuitry Positive digital supply voltage 5.5 V) Used as external reference input when internal reference is disabled (i.e., EXTLO = AVDD). Used as internal reference output when EXTLO = AGND, requires 0.1 F decoupling capacitor to AGND when used as reference output. Internal reference ground. Connect to AVDD to disable the internal reference source. DAC current output. Full scale when all input bits are set 1 Complementary DAC current output. Full scale when all input bits are 0 Mode select. Internal pulldown. Mode 0 is selected if this pin is left floating or connected to DGND. See timing diagram. No connection Asynchronous hardware power down input. Active high. Internal pulldown. Requires s to power down but ms to power up.

absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage range, AVDD (see Note 6.5 V DVDD (see Note 6.5 V Voltage between AGND and DGND. 0.5 V Supply voltage range, AVDD to DVDD. 6.5 V CLK, SLEEP, MODE (see Note V to DVDD 0.3 V Digital input D11D0 (see Note V to DVDD IOUT1, IOUT2 (see Note V to AVDD COMP1, COMP2 (see Note V to AVDD 0.3 V EXTIO, BIASJ (see Note V to AVDD 0.3 V EXTLO (see Note 0.3 V Peak input current (any input). 20 mA Peak total input current (all inputs). 30 mA Operating free-air temperature range, TA: to 85C Storage temperature range. to 150C Lead temperature mm (1/16 inch) from the case for 10 seconds. 260C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Measured with respect to AGND. 2. Measured with respect to DGND.


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
THS5661AI 12-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter
THS5661AIDW ti THS5661A, 12-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5661APW 12-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5661EVM 12-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5661IDW ti THS5661, 12-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5661PW 12-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5671A 14-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter
THS5671ADW 14-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5671AI 14-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter
THS5671AIDW ti THS5671A, 14-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5671APW 14-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5671EVM 14-BIT, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2MA to 20MA, 3V & 5V Digital I/f
THS6002 Dual Differential Line Drivers And Receivers
THS6002CDWP ti THS6002, Dual Differential Line Driver/receiver
THS6002DWP Dual Differential Line Drivers And Receivers
THS6002IDWP ti THS6002, Dual Differential Line Driver/receiver
THS6007CPWP ti THS6007, Dual Differential Line Drivers And Low-power Receivers
THS6012 500-ma Dual Differential Line Driver
THS6012CDWP ti THS6012, 500-mA Dual Differential Line Driver

UCC3957MTR-1G4 : IC, BATTERY PROTEC, LI-ION 4CELL SSOP-16 Specifications: Battery Type: Li-Ion ; IC Interface Type: - ; Battery Protection: Over Current ; No. of Batteries: 4 ; Shutdown Current: 3.5A ; Supply Voltage Range: 6.5V to 20V ; Battery IC Case Style: SSOP ; No. of Pins: 16 ; Operating Temperature Range: -20C to +70C ; MSL: -

CDCLVC1103PW : IC, CLOCK BUFFER, 250MHZ, TSSOP-8 Specifications: Clock IC Type: Clock Buffer ; IC Interface Type: - ; Frequency: 250MHz ; No. of Outputs: 3 ; No. of Multipliers / Dividers: - ; Supply Current: 6mA ; Supply Voltage Range: 2.3V to 2.7V, 3V to 3.6V ; Digital IC Case Style: TSSOP ; No. of Pins: 8 ; Operating Temperature Range: -40C to

ADS7807PG4 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics) 2 Single-Ended, Unipolar; 2 Single-Ended, Bipolar Tube Analog and Digital; IC ADC 16-BIT 40KHZ SMPL 28-DIP Specifications: Number of Bits: 16 ; Package / Case: 28-DIP (0.300", 7.62mm) ; Data Interface: Serial, Parallel ; Packaging: Tube ; Sampling Rate (Per Second): 40k ; Operating Temperature: -40C ~ 85C ; Voltage Supply Source: Analog and Digital ; Number of Inputs and Type: 2 Single-Ended, Unipolar;

TPS65185RGZR : Pmic - Power Management - Specialized Integrated Circuit (ics) Cut Tape (CT) 5.5mA 3 V ~ 6 V; IC PWR MGMT E INK 48VQFN Specifications: Applications: E Ink, Vizplex Display, OMAP ; Current - Supply: 5.5mA ; Voltage - Supply: 3 V ~ 6 V ; Package / Case: 48-VFQFN Exposed Pad ; Packaging: Cut Tape (CT) ; Operating Temperature: -10C ~ 85C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

SN74AUP1T57DSFR : Low-power DUAL 2-input Positive-and GATE

TM4C123FE6PMI : ARM Microcontrollers - MCU Tiva C Series MCU Specifications: Manufacturer: Texas Instruments ; Core: ARM Cortex M4 ; Data Bus Width: 32 bit ; Maximum Clock Frequency: 80 MHz ; Program Memory Size: 128 KB ; Data RAM Size: 32 KB ; On-Chip ADC: Yes ; Operating Supply Voltage: 3.3 V ; Maximum Operating Temperature: + 85 C ; Package / Case: LQFP-64

AMC1305L25 : Reinforced Isolated Modulator with 250mV Input and LVDS Interface The AMC1305 is a precision, delta-sigma (ΔΣ) modulator with the output separated from the input circuitry by a capacitive double isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7000 VPEAK according to t

LDC2114PWT PRELIMINARY RELEASE : Data Acquisition ADCs/DACs - Specialised 4ch HMI Inductive Touch Buttons Texas Instruments LDC2112 / LDC2114 Inductive Touch Buttons include an inductive sensing technology that enables touch button design. This can be done on a wide variety of materials such as metal, glass, plastic, and wood, by measuring small deflections of conductive targets. The sensor for an in

Same catergory

ADS7826IDRBR : ti ADS7826, 5.25V-2.7V, 10 Bit, 300KSPS, Synchronous Serial ADC. 10/8/12-BIT HIGH SPEED 2.7 V microPOWERTM SAMPLING ANALOG-TO-DIGITAL CONVERTER High Throughput at Low Supply Voltage (2.7 V VCC) 12-bit 125 KSPS 10-bit 200 KSPS 8-bit 250 KSPS Very Wide Operating Supply VoltageL: 5.25 V (as Low 2.0 V With Reduced Performance) Rail-to-Rail, Pseudo Differential Input Wide Reference Voltage: mV to VCC Micropower Auto Power-Down:.

DAC813AU : ti DAC813, Microprocessor-compatible 12-Bit D/A Converter. q 1/2LSB NONLINEARITY OVER TEMPERATURE q GUARANTEED MONOTONIC OVER TEMPERATURE q LOW POWER: 270mW typ q DIGITAL INTERFACE DOUBLE BUFFERED: 12 AND + 4 BITS q SPECIFIED AT 12V AND 15V POWER SUPPLIES q RESET FUNCTION TO BIPOLAR ZERO q 0.3" WIDE DIP AND SO PACKAGES converter with voltage output operational amplifier. Fast current switches and laser-trimmed.

HLS30ZG : Hls30 Series . 30a Half-brick DC/DC Converter 48v Input 5.0v, 3.3v, 2.5v Output.

HT82V737 : 16-Bit Stereo Audio D/A Converter With Earphone Driver General HT82V737 is a Low Power Consumption Stereo DAC With an Integrated Earphone Driver. The Device Utilizes CMOS Technology Specially For Portable MP3 Players, VCD And CD Machines. It Converts The 16 Bits Serial Data Into an Analog Output Voltage BY High Precision D/A Converter. It CAN be Used.

LTC1456 : Voltage Output. LTC1456, 5V, 0.5LSB Dnl, Micropower, SO-8, Clear Input.

MAS9138 : Convertion Asynchronous to Synchronous & Syn to As. Asynchronous to Synchronous/synchronous to Asynchronous Converter.

MAX1065 : MAX1065, MAX1066 Low-Power, 14-Bit Analog-to-digital Converters With Parallel Interface.

MAX1211 : 65Msps, 12-Bit, if Sampling ADC. Direct IF Sampling 400MHz 700MHz Input Bandwidth Excellent Dynamic Performance 66.8dB SNR at fIN 175MHz 79.7dBc SFDR at fIN 175MHz 3.3V Low-Power Operation 314mW (Single-Ended Clock Mode) 340mW (Differential Clock Mode) Differential or Single-Ended Clock Accepts to 80% Clock Duty Cycle Fully Differential or Single-Ended Analog Input Adjustable Full-Scale.

THS5641 : 8-bit, 100 Msps, Commsdac Digital-to-analog Converter. Member of the Pin-Compatible CommsDACTM Product Family 100 MSPS Update Rate 8-Bit Resolution Signal-to-Noise and Distortion Ratio (SINAD) at 5 MHz: 50 dB Integral Nonlinearity INL: 0.25 LSB Differential Nonlinearity DNL: 0.25 LSB 1 ns Setup/Hold Time Glitch Energy: 5 pV-s Settling Time 35 ns Differential Scalable Current Outputs: 20 mA On-Chip 1.2-V.

TLC545 : 8-bit Analog-to-digital Converters With Serial Control And 19 Inputs. TLC546I 8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 19 INPUTS 8-Bit Resolution A/D Converter Microprocessor Peripheral or Stand-Alone Operation On-Chip 20-Channel Analog Multiplexer Built-in Self-Test Mode Software-Controllable Sample and Hold Total Unadjusted Error. 0.5 LSB Max Timing and Control Signals Compatible With 8-Bit TLC540.

TLC5540CNSLE : ti TLC5540, 8-Bit, 40 MSPS ADC Single Ch., Internal S&H, Low Power.

DAC124S085 : The DAC124S085 is a full-featured, general purpose QUAD 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 360 A at 3V and 480 A at 5V. The DAC124S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface.

AD5754R : Complete, Quad, 16-Bit, Serial Input, Unipolar/Bipolar Voltage Output DAC The AD5734R/AD5754R are quad, 14-/16-bit serial input, voltage output, digital-to-analog converters (DACs). They operate from single supply voltages of +4.5 V up to +16.5 V or dual supply voltages from 4.5 V up to 16.5 V. Nominal full-scale output range is software selectable.

AD7194 : 8-Channel, 4.8 KHz, Ultralow Noise, 24-Bit Sigma-Delta ADC With PGA The AD7194 is a low noise, complete analog front end for high precision measurement applications. It contains a low noise, 24-bit sigma-delta (?-?) analog-to-digital converter (ADC). The on-chip low noise gain stage means that signals of small amplitude can interface directly to the ADC.

0-C     D-L     M-R     S-Z