Details, datasheet, quote on part number: THS5641APW
PartTHS5641APW
CategoryData Conversion => Multiplying Data Converters
Description8-bit, 100 Msps, Commsdace Digital-to-analog Converter
CompanyTexas Instruments, Inc.
DatasheetDownload THS5641APW datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Member of the Pin-Compatible CommsDACTM Product Family 100 MSPS Update Rate 8-Bit Resolution Signal-to-Noise and Distortion Ratio (SINAD) at 5 MHz: 50 dB Integral Nonlinearity INL: 0.25 LSB Differential Nonlinearity DNL: 0.25 LSB 1 ns Setup/Hold Time Glitch Energy: 5 pV-s Settling Time 35 ns Differential Scalable Current Outputs: 20 mA On-Chip 1.2-V Reference 3-V and 5-V Single Supply Operation Straight Binary or Twos Complement Input Power Dissipation: 3.3 V, Sleep Mode: 3.3 V Package: 28-Pin SOIC and TSSOP

SOIC (DW) OR TSSOP (PW) PACKAGE (TOP VIEW)
CLK DVDD DGND MODE AVDD IOUT1 IOUT2 AGND COMP1 BIASJ EXTIO EXTLO SLEEP
description

The an 8-bit resolution digital-to-analog converter (DAC) optimized for video applications and digital data transmission in wired and wireless communication systems. The 8-bit DAC is a member of the CommsDACTM series of high-speed, low-power CMOS digital-to-analog converters. The CommsDACTM family consists of pin compatible 12-, 10-, and 8-bit DACs. All devices offer identical interface options, small outline package and pinout. The THS5641A offers superior ac and dc performance while supporting update rates to 100 MSPS. The THS5641A operates from an analog and digital supply 5.5 V. Its inherent low power dissipation 100 mW ensures that the device is well suited for portable and low power applications. Lowering the full-scale current output reduces the power dissipation without significantly degrading performance. The device features a SLEEP mode, which reduces the standby power to approximately 17 mW, thereby optimizing the power consumption for system needs. The THS5641A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array architecture combined with simultaneous switching shows excellent dynamic performance. On-chip edge-triggered input latches and 1.2 V temperature compensated bandgap reference provide a complete monolithic DAC solution. The digital supply range 5.5 V supports 3 V and 5 V CMOS logic families. Minimum data input setup and hold times allow for easy interfacing with external logic. The THS5641A supports both a straight binary and twos complement input word format, enabling flexible interfacing with digital signal processors.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. CommsDAC is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The THS5641A provides a nominal full-scale differential output current 20 mA and >300 k output impedance, supporting both single-ended and differential applications. The output current can be directly fed to the load (e.g., external resistor load or transformer), with no additional external output buffer required. An accurate on-chip reference and control amplifier allows the user to adjust this output current from 20 mA down to 2 mA, with no significant degradation of performance. This reduces power consumption and provides 20 dB gain range control capabilities. Alternatively, an external reference voltage and control amplifier may be applied in applications using a multiplying DAC. The THS5641A is available in both a 28-pin SOIC and TSSOP package. The device is characterized for operation over the industrial temperature range to 85C.

C1 SLEEP EXTLO 1.2 V REF 1 nF EXTIO CEXT 2 k RBIAS DVDD D[7:0] Logic Control 50 RLOAD BIASJ I BIAS + Control AMP 0.1 F AVDD

TERMINAL NAME AGND AVDD BIASJ CLK COMP2 D[7:0] DGND DVDD EXTIO NO. I/O DESCRIPTION Analog ground return for the internal analog circuitry Positive analog supply voltage 5.5 V) Full-scale output current bias External clock input. Input data latched on rising edge of the clock. Compensation and decoupling node, requires 0.1 F capacitor to AVDD. Internal bias node, requires 0.1 F decoupling capacitor to AGND. Data bits 0 through D7 is most significant data bit (MSB), D0 is least significant data bit (LSB). Digital ground return for the internal digital logic circuitry Positive digital supply voltage 5.5 V) Used as external reference input when internal reference is disabled (i.e., EXTLO = AVDD). Used as internal reference output when EXTLO = AGND, requires 0.1 F decoupling capacitor to AGND when used as reference output Internal reference ground. Connect to AVDD to disable the internal reference source DAC current output. Full scale when all input bits are set 1 Complementary DAC current output. Full scale when all input bits are 0 Mode select. Internal pulldown. Mode 0 is selected if this pin is left floating or connected to DGND. See timing diagram. No connection Asynchronous hardware power down input. Active High. Internal pulldown. Requires s to power down but ms to power up.

absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage range, AVDD (see Note 6.5 V DVDD (see Note 6.5 V Voltage between AGND and DGND. 0.5 V Supply voltage range, AVDD to DVDD. 6.5 V CLK, SLEEP, MODE (see Note V to DVDD 0.3 V Digital input D7D0 (see Note V to DVDD IOUT1, IOUT2 (see Note V to AVDD COMP1, COMP2 (see Note V to AVDD 0.3 V EXTIO, BIASJ (see Note V to AVDD 0.3 V EXTLO (see Note 0.3 V Peak input current (any input). 20 mA Peak total input current (all inputs). 30 mA Operating free-air temperature range, TA: to 85C Storage temperature range. to 150C Lead temperature mm (1/16 inch) from the case for 10 seconds. 260C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Measured with respect to AGND. 2. Measured with respect to DGND.


 

Related products with the same datasheet
THS5641DW
THS5641PW
Some Part number from the same manufacture Texas Instruments, Inc.
THS5641DW 8-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5641EVM 8-bit, 100 Msps, Commsdac Digital-to-analog Converter
THS5641IDW ti THS5641, 8-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5641PW 8-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5651 10-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5651A 10-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5651ADW
THS5651AI
THS5651AIDW ti THS5651A, 10-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5651DW 10-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5651EVM 10-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5651IDW ti THS5651, 10-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5651PW 10-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5661 12-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5661A 12-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter
THS5661ADW 12-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5661AI 12-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter
THS5661AIDW ti THS5661A, 12-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA
THS5661APW 12-bit, 125 Msps, Commsdace Digital-to-analog Converter
THS5661EVM 12-bit, 100 Msps, Commsdace Digital-to-analog Converter
THS5661IDW ti THS5661, 12-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA

BQ2954SNTR : ti BQ2954, Li-ion Switchmode Charge Management ic

SN54ALVTH16244WD : 2.5-v/3.3-v 16-bit Buffers/drivers With 3-state Outputs

SN74LVC2G240 : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage Dual Buffer/driver With 3-state Outputs

SN74V3650 : 2048 X 36 Synchronous Fifo Memory

TL1451ACN : Switching DC/DC Controllers ti TL1451A, Dual Channel Controller With Wide Input Voltage Range

ADS5545IRGZTG4 : ADS5545 is a high performance 14-bit, 170-MSPS A/D converter. It offers state-of-the art functionality and performance using advanced techniques to minimize board space. Using an internal sample and hold and low jitter clock buffer, the ADC supports both high SNR and high SFDR at high input frequenc

BQ24313DSG : Overvoltage AND Overcurrent Protection IC AND Li+ Charger Front-end Protection IC

UC3847NG4 : Pmic - Voltage Regulator - Dc Dc Switching Controller Integrated Circuit (ics) Current Mode Tube 2 8 V ~ 40 V; IC PWM BUCK BST FLYBCK CM 16PDIP Specifications: PWM Type: Current Mode ; Number of Outputs: 2 ; Package / Case: 16-DIP (0.300", 7.62mm) ; Packaging: Tube ; Duty Cycle: 50% ; Voltage - Supply: 8 V ~ 40 V ; Frequency - Max: 500kHz ; Buck: Yes ; Boost: Yes ; Flyback: Yes ; Inverting: No ; Doubler: No ; Divider: No ; Cuk: No ; Isolate

TL594CNE4 : Pmic - Voltage Regulator - Dc Dc Switching Controller Integrated Circuit (ics) Voltage Mode Tube 2; IC PWM CONTROL CIRCUIT 16-DIP Specifications: PWM Type: Voltage Mode ; Number of Outputs: 2 ; Package / Case: 16-DIP (0.300", 7.62mm) ; Packaging: Tube ; Duty Cycle: 45% ; Voltage - Supply: 7 V ~ 40 V ; Frequency - Max: 300kHz ; Buck: No ; Boost: Yes ; Flyback: Yes ; Inverting: No ; Doubler: No ; Divider: No ; Cuk: No ; Isolated

TS3V340DG4 : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC VIDEO SWITCH QUAD SPDT 16SOIC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

BQ29700DSER : Battery Management Second Level Protector Specifications: Product: ; Battery Type: Li-Ion, Li-Polymer ; Output Voltage: ; Output Current: ; Operating Supply Voltage: ; Operating Supply Current: ; Maximum Operating Temperature: + 85 C ; Minimum Operating Temperature: - 40 C ; Package/Case: WSON-6 ; Packaging: Reel

 
0-C     D-L     M-R     S-Z