|Category||Semiconductors => Data Converters => Digital-to-Analog Converters (DACs) => High Speed DACs (>10MSPS)|
|Part family||THS5641A 8-Bit, 100-MSPS Digital-to-Analog Converter (DAC)|
|Description||8-Bit, 100-MSPS Digital-to-Analog Converter (DAC) 28-SOIC -40 to 85|
|Company||Texas Instruments, Inc.|
|Datasheet||Download THS5641A datasheet
|Cross ref.||Similar parts: DAC908E, DAC908E/2K5, DAC908U, DAC908U/1K, AD9708, AD9708AR, AD9708ARRL, AD9708ARU, AD9708ARURL7, AD9708ARUZ|
|Operating Temperature Range(C)||-40 to 85|
|Sample / Update Rate(MSPS)||100|
|Approx. Price (US$)||3.19 | 1ku|
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|• Wideband Complementary Current Output DAC Single-Ended Interface
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps | Doc
|• Noise Analysis for High Speed Op Amps (Rev. A)
As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predic | Doc
|TSW2200EVM: TSW2200 Low-Cost Portable Power Supply Evaluation Module|
Member of the Pin-Compatible CommsDAC Product Family 100 MSPS Update Rate 8-Bit Resolution Signal-to-Noise and Distortion Ratio (SINAD) at 5 MHz: 50 dB Integral Nonlinearity INL: 0.25 LSB Differential Nonlinearity DNL: 0.25 LSB 1 ns Setup/Hold Time Glitch Energy: 5 pV-s Settling Time 35 ns Differential Scalable Current Outputs: 20 mA On-Chip 1.2-V Reference 3-V and 5-V Single Supply Operation Straight Binary or Twos Complement Input Power Dissipation: 3.3 V, Sleep Mode: 3.3 V Package: 28-Pin SOIC and TSSOPSOIC (DW) OR TSSOP (PW) PACKAGE (TOP VIEW)
CLK DVDD DGND MODE AVDD IOUT1 IOUT2 AGND COMP1 BIASJ EXTIO EXTLO SLEEP
The an 8-bit resolution digital-to-analog converter (DAC) optimized for video applications and digital data transmission in wired and wireless communication systems. The 8-bit DAC is a member of the CommsDAC series of high-speed, low-power CMOS digital-to-analog converters. The CommsDAC family consists of pin compatible 12-, 10-, and 8-bit DACs. All devices offer identical interface options, small outline package and pinout. The THS5641A offers superior ac and dc performance while supporting update rates to 100 MSPS. The THS5641A operates from an analog and digital supply 5.5 V. Its inherent low power dissipation 100 mW ensures that the device is well suited for portable and low power applications. Lowering the full-scale current output reduces the power dissipation without significantly degrading performance. The device features a SLEEP mode, which reduces the standby power to approximately 17 mW, thereby optimizing the power consumption for system needs. The THS5641A is manufactured in Texas Instruments advanced high-speed mixed-signal CMOS process. A current-source-array architecture combined with simultaneous switching shows excellent dynamic performance. On-chip edge-triggered input latches and 1.2 V temperature compensated bandgap reference provide a complete monolithic DAC solution. The digital supply range 5.5 V supports 3 V and 5 V CMOS logic families. Minimum data input setup and hold times allow for easy interfacing with external logic. The THS5641A supports both a straight binary and twos complement input word format, enabling flexible interfacing with digital signal processors.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. CommsDAC is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
The THS5641A provides a nominal full-scale differential output current 20 mA and >300 k output impedance, supporting both single-ended and differential applications. The output current can be directly fed to the load (e.g., external resistor load or transformer), with no additional external output buffer required. An accurate on-chip reference and control amplifier allows the user to adjust this output current from 20 mA down to 2 mA, with no significant degradation of performance. This reduces power consumption and provides 20 dB gain range control capabilities. Alternatively, an external reference voltage and control amplifier may be applied in applications using a multiplying DAC. The THS5641A is available in both a 28-pin SOIC and TSSOP package. The device is characterized for operation over the industrial temperature range to 85°C.
C1 SLEEP EXTLO 1.2 V REF 1 nF EXTIO CEXT 2 k RBIAS DVDD D[7:0] Logic Control 50 RLOAD BIASJ I BIAS + Control AMP 0.1 µF AVDD
TERMINAL NAME AGND AVDD BIASJ CLK COMP2 D[7:0] DGND DVDD EXTIO NO. I/O DESCRIPTION Analog ground return for the internal analog circuitry Positive analog supply voltage 5.5 V) Full-scale output current bias External clock input. Input data latched on rising edge of the clock. Compensation and decoupling node, requires 0.1 µF capacitor to AVDD. Internal bias node, requires 0.1 µF decoupling capacitor to AGND. Data bits 0 through D7 is most significant data bit (MSB), D0 is least significant data bit (LSB). Digital ground return for the internal digital logic circuitry Positive digital supply voltage 5.5 V) Used as external reference input when internal reference is disabled (i.e., EXTLO = AVDD). Used as internal reference output when EXTLO = AGND, requires 0.1 µF decoupling capacitor to AGND when used as reference output Internal reference ground. Connect to AVDD to disable the internal reference source DAC current output. Full scale when all input bits are set 1 Complementary DAC current output. Full scale when all input bits are 0 Mode select. Internal pulldown. Mode 0 is selected if this pin is left floating or connected to DGND. See timing diagram. No connection Asynchronous hardware power down input. Active High. Internal pulldown. Requires µs to power down but ms to power up.absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage range, AVDD (see Note 6.5 V DVDD (see Note 6.5 V Voltage between AGND and DGND. 0.5 V Supply voltage range, AVDD to DVDD. 6.5 V CLK, SLEEP, MODE (see Note V to DVDD 0.3 V Digital input D7D0 (see Note V to DVDD IOUT1, IOUT2 (see Note V to AVDD COMP1, COMP2 (see Note V to AVDD 0.3 V EXTIO, BIASJ (see Note V to AVDD 0.3 V EXTLO (see Note 0.3 V Peak input current (any input). 20 mA Peak total input current (all inputs). 30 mA Operating free-air temperature range, TA: to 85°C Storage temperature range. to 150°C Lead temperature mm (1/16 inch) from the case for 10 seconds. 260°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Measured with respect to AGND. 2. Measured with respect to DGND.
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|THS5641ADW 8-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5641AI 8-bit, 100 Msps, Commsdac(tm) Digital-to-analog Converter|
|THS5641AIDW ti THS5641A, 8-Bit, 100 Msps, CommsDAC(TM) DAC Scalable Current Outputs Between 2mA to 20mA|
|THS5641APW 8-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5641EVM 8-bit, 100 Msps, Commsdac Digital-to-analog Converter|
|THS5641IDW ti THS5641, 8-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA|
|THS5641PW 8-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5651 10-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5651A 10-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5651AIDW ti THS5651A, 10-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA|
|THS5651DW 10-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5651EVM 10-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5651IDW ti THS5651, 10-Bit, 100MSPS, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA|
|THS5651PW 10-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5661 12-bit, 100 Msps, Commsdace Digital-to-analog Converter|
|THS5661A 12-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter|
|THS5661ADW 12-bit, 125 Msps, Commsdace Digital-to-analog Converter|
|THS5661AI 12-bit, 125 Msps, Commsdac(tm) Digital-to-analog Converter|
|THS5661AIDW ti THS5661A, 12-Bit, 125 Msps, Commsdac, Diff. Scalable Current Outputs Between 2mA to 20mA|
74ACT11874DW : D-Type Flip-Flops ti 74ACT11874, Dual 4-Bit D-type Edge-triggered Flip-flops With 3-State Outputs
74FCT162H244CTPVCT : Non-Inverting Buffers and Drivers ti CY74FCT162H244T, 16-Bit Buffers/drivers With Bus-hold And 3-State Outputs
SN74ALVC16270 : Bus Oriented Circuits 12-bit to 24-bit Registered Bus Exchanger With 3-state Outputs
SN74CBT32245ZKER : Standard Bus Switches ti SN74CBT32245, 32-Bit Fet Bus Switch
TLV0838IPWR : ti TLV0838, 8-Bit 37.9 KSPS ADC Serial Out, Ratiometric op or VCC Ref, Ttl/mos Input & Output Compatible, 8 Ch.
TMS29F258 : 262,144-bit Flash Electrically Erasable Programmable Read-only Memories
ADS6142SKGD1 : Data Acquisition - Analog To Digital Converter (adc) Integrated Circuit (ics); IC ADC 14B SRL/PAR 65MSPS 0XCEPT Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
TL7733BCDG4 : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tube 1; IC SUPP-VOLTAGE SUPERVISOR 8SOIC Specifications: Output: Complementary ; Reset: Active High/Active Low ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Number of Voltages Monitored: 1 ; Reset Timeout: 270 ns Typical Propagation Delay ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 3.08V ; Operating Tem
CD74HCT374M96E4 : HCT SERIES, 6-BIT DRIVER, TRUE OUTPUT, PDSO16 Specifications: Technology: CMOS ; Device Type: Line / Bus Driver ; Supply Voltage: 5V ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Package Type: SOIC, PLASTIC, MS-012AC, SOIC-16 ; Pins: 16
TUSB8041-Q1 : TUSB8041-Q1 Four-Port USB 3.0 Hub The TUSB8041-Q1 is a four-port USB 3.0 hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed connections on the downstream ports. When the upstream port is connected to an electrical e
CC1190 : 850 - 950MHz RF Front End CC1190 is a cost-effective and high-performance RF Front End for low-power and low-voltage wireless applications at 850 - 950 MHz. CC1190 is a range extender for the sub-1 GHz low-power RF transceivers, transmitters, and System-on-Chip devices from Texas Instruments. CC1190 integrates a power
AD7545 : 12-Bit, Buffered, Multiplying CMOS DAC. DUCT PR O RODU T S OBS IB om Data Sheet FOR A tral Applicati @in tersil.c call il: m a 12-Bit, Buffered, Multiplying CMOS DAC itle D75 ) bjec 2t, ffer , ltip OS C) utho ) eyw s tersi rpor on, ico ucto ltip ng, L, OS reato ) OCI O fmar The is a low cost monolithic 12-bit, CMOS multiplying DAC with on-board data latches. Data is loaded in a single 12-bit.
ADS1203 : Current Shunt Delta-sigma Modulator, 10MHz Clk, +/-250mV Input, 16-Bit Resolution.
HI5630 : Triple 8-Bit, 80MSPS A/D Converter With Internal Voltage Reference. OL RE /tsc o D MEN cal Supp ersil.com hn i w.in Data Sheet March 8-INT 1-88 Triple 8-Bit, 80MSPS A/D Converter with Internal Voltage Reference The is a monolithic, triple 8-bit, 80MSPS analog-to-digital converter fabricated in an advanced CMOS process. It is designed for digitizing RGB graphics from work stations and personal computers. The HI5630 reaches.
LT1026I : Voltage Converter. Generates + and from Single Input ± 18V Output Only Needs Four 1µF Capacitors No Inductors 10mA Output Current Minimum Operates Down 4V No Latchup 8-Pin Minidip The is a switched capacitor voltage doubler and inverter on a single monolithic die. Capable of operating from to 10V input, it provides ± 18V output. Output currents of over 10mA are available.
LTC1861L : ->Multiplexed. LTC1861L, 3V, 2-Ch 12-bit, 150ksps, Serial Interface, Msop.
MAX1069 : MAX1069 58.6ksps, 14-Bit, 2-Wire Serial ADC in a 14-Pin Tssop. The is a low-power, 14-bit successiveapproximation analog-to-digital converter (ADC). The device automatic power-down, an on-chip 4MHz clock, a +4.096V internal reference, and I2CTM-compatible 2-wire serial interface capable of both fast and high-speed modes. The MAX1069 operates from a single supply and consumes 5mW at the maximum conversion rate of 58.6ksps.
MAX543 : Serial, CMOS, Multiplying, 12-Bit DAC in 8-Pin Package.
TC1320 : The TC1320 is a Serially Accessible 8-bit Voltage Output Digital-to-analog Converter (DAC).
TLC3578IDW : ti TLC3578, Serial Out, Low Power With Built-in Conversion Clock & 8x Fifo, 8 Channels.
TLV1504ID : ti TLV1504, 10-Bit 200 KSPS ADC Serial Out, Hardware/software/auto Powerdown, Pgrmable Auto Channel Sweep, 4 Ch..
TLV5633C : 2.7v to 5.5v Low Power 12-bit Digital-to-analog Converters With Internal Reference And Power Down.
ADC124S101 : 4 Channel, 1 MSPS, 12-Bit A/D Converter The ADC124S101 is a low-power, four-channel CMOS 12-bit analog-to-digital converter with a high-speed serial interface. Unlike the conventional practice of specifying performance at a single sample rate only, the ADC124S101 is fully specified over a sample rate range of 500 kSPS to 1 MSPS. The converter is based.
ADS8410 : 16-Bit, Unipolar Pseudo Diff Input, 2MSPS Sampling rate, 4.75V to 5.25V ADC with LVDS Serial Interf The ADS8410 is a 16-bit, 2-MSPS, analog-to-digital (A/D) converter with 4-V internal reference. The device includes a capacitor based SAR A/D converter with inherent sample and hold. The ADS8410 also includes a 200-Mbps, LVDS, serial interface. This interface.
TDA7535 : D/A Converters Delta/sigma cascade 20 bit stereo DAC. 20-bit resolution single ended output Analog reconstruction third order Chebyshev filter I2S input data format On chip PLL System clock: Fs 2 output channels 0.9 VRMS single ended output dynamic 3.3 V power supply Reset Sampling rate 36 kHz to 48 kHz The is a stereo, digital-to-analog converter designed for audio application, including digital interpolation.
CS5451A : 6-Channel Delta-Sigma A/D Converter The CS5451A is a highly integrated, Delta-Sigma analog-to-digital (A/D) converter developed for the power measurement industry. The CS5451A combines six Delta-Sigma A/D converters, decimation filters and a serial interface on a single chip..
MAX11101 : 14-Bit, +5V, 200ksps ADC With 10µA Shutdown The MAX11101 low-power, 14-bit analog-to-digital converter (ADC) a successive approximation ADC, automatic power-down, fast 1.1µs wake-up, and a high-speed SPI/QSPI™/MICROWIRE®-compatible interface. The MAX11101 operates with a single +5V analog supply and a separate digital supply, allowing direct interfacing.
ISL26311 : 12-bit, 125kSPS Low-power ADCs With Single-ended And Differential Inputs And Multiple Input Channels 12-bit, 125kSPS Low-power ADCs with Single-ended and Differential Inputs and Multiple Input Channels.