Details, datasheet, quote on part number: THS4503ID
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => High-Speed Op Amps (>=50MHz)
Part familyTHS4503 High-Speed Fully-Differential Amplifiers
TitleFully Differential
DescriptionHigh-Speed Fully-Differential Amplifiers 8-SOIC -40 to 85
CompanyTexas Instruments, Inc.
DatasheetDownload THS4503ID datasheet
Find where to buy
@ MHz8
Slew Rate(Typ)(V/us)2800
Vos (Offset Voltage @ 25C)(Max)(mV)4
Approx. Price (US$)4.36 | 1ku
Vn at Flatband(Typ)(nV/rtHz)6.8
BW @ Acl(MHz)370
ArchitectureFully Differential
Output Current(Typ)(mA)120
3rd Harmonic(dBc)97
Operating Temperature Range(C)0 to 70,-40 to 85
Total Supply Voltage(Min)(+5V=5, +/-5V=10)4.5
Input Bias Current(Max)(pA)4600000
Offset Drift(Typ)(uV/C)10
Acl, min spec gain(V/V)1
Vn at 1kHz(Typ)(nV/rtHz)27
Total Supply Voltage(Max)(+5V=5, +/-5V=10)15
2nd Harmonic(dBc)83
Number of Channels(#)1
Iq per channel(Max)(mA)28
Iq per channel(Typ)(mA)23
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DSOICR-PDSO-G75TUBE4503I 3.914.91.581.27
Application notes
• Noise Analysis for High Speed Op Amps (Rev. A)
As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predic | Doc
Evaluation Kits
ADS5232EVM: ADS5232 Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter Evaluation Module
ADS5231EVM: ADS5231 Dual-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter Evaluation Module
THS7530EVM: THS7530 Evaluation Module
THS4503EVM: THS4503 Evaluation Module
Spice Model
THS4503 TINA-TI Spice Model (Rev. A) - ZIP (10/04/2011)
THS4503 PSpice Model (Rev. A) - ZIP (10/04/2011)


Features, Applications


Fully Differential Architecture Bandwidth: 370 MHz Slew Rate: 2800 V/s IMD3: -95 dBc at 30 MHz OIP3: 51 dBm at 30 MHz Output Common-Mode Control Wide Power Supply Voltage Range: 15 V

APPLICATIONS D High Linearity Analog-to-Digital Converter D Differential Line Driver D Active Filtering of Differential Signals

Preamplifier Wireless Communication Receiver Chains Single-Ended to Differential Conversion

D Centered Input Common-Mode Range D Power-Down Capability (THS4502) D Evaluation Module Available DESCRIPTION

The THS4502 and THS4503 are high-performance fully differential amplifiers from Texas Instruments. The THS4502, featuring power-down capability, and the THS4503, without power-down capability, set new performance standards for fully differential amplifiers with unsurpassed linearity, supporting 14-bit operation through 40 MHz. Package options include the 8-pin SOIC and the 8-pin MSOP with PowerPAD for a smaller footprint, enhanced ac performance, and improved thermal dissipation capability.

THS4140/1 THS4150/1 DESCRIPTION 370 MHz, 2800 V/s, VICR Includes VS- 370 MHz, 2800 V/s, Centered VICR V, 100 MHz, 43 V/s, 3.7 nVHz V, 150 MHz, 51 V/s, 1.3 nVHz V, 160 MHz, 450 V/s, 6.5 nVHz V, 150 MHz, 650 V/s, 7.6 nVHz

(1) Even numbered devices feature power-down capability

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

over operating free-air temperature range unless otherwise noted(1) UNIT

Supply voltage, VS Input voltage, VI Output current, IO (2) Differential input voltage, VID Continuous power dissipation Maximum junction temperature, TJ Operating free-air temperature range, TA: C suffix I suffix Storage temperature range, Tstg

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE D (8 pin) DGN (8 pin) JC (C/W) 4.7 JA(1) (C/W) 167 58.4 POWER RATING 1.11 W
Lead temperature mm (1/16 inch) from case for 10 seconds

MIN Dual supply Supply voltage Operating freeair temperature, TA Single supply C suffix I suffix 0 -40 NOM 5 5 MAX C UNIT V

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) The THS450x may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipative plane for proper power dissipation. Failure do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI technical brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package.


(1) This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., THS4502IDR).

= +1, Single-ended input unless otherwise noted. THS4502 AND THS4503 PARAMETER TEST CONDITIONS TYP 25C AC PERFORMANCE = +1, PIN= -20 dBm, = 392 Small-signal bandwidth = +2, PIN= -30 dBm, Rf +5, PIN= -30 dBm, = +10, PIN = -30 dBm, 1.3 k Gain-bandwidth product Bandwidth for 0.1dB flatness Large-signal bandwidth Slew rate Rise time Fall time Settling time 0.01% 0.1% Harmonic distortion 2nd harmonic 3rd harmonic Third-order intermodulation distortion Third-order output intercept point Input voltage noise Input current noise Overdrive recovery time DC PERFORMANCE Open-loop voltage gain Input offset voltage Average offset voltage drift Input bias current Average bias current drift Input offset current Average offset current drift INPUT Common-mode input range Common-mode rejection ratio Input impedance OUTPUT Differential output voltage swing Differential output current drive Output balance error Closed-loop output impedance (single-ended) = 20 PIN = -20 dBm, = 100 kHz = 1 MHz mA dB Min Typ dB pF Min Typ dB mV V/C A nA/C A nA/C Min Max Typ Max Typ Max Typ > +10 PIN = -20 dBm VP VPP Step 2 VPP Step 2 VPP Step = 4 VPP = 4 VPP = 2 VPP = 8 MHz = 30 MHz = 8 MHz = 30 MHz = 30 MHz, Rf kHz tone spacing = 30 MHz, 392 , Referenced > 1 MHz > 100 kHz Overdrive 5.5 V dBc dBm nV/Hz pA/Hz ns MHz V/s ns Typ 25C OVER TEMPERATURE to 85C UNITS MIN/ TYP/ MAX


Related products with the same datasheet
Some Part number from the same manufacture Texas Instruments, Inc.
THS4503IDGK High-speed Fully-differential Amplifiers
THS4503IDGN ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDGNR High-speed Fully-differential Amplifiers
THS4503IDGNR ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDR High-speed Fully-differential Amplifiers
THS4503IDR ti THS4503, High-speed Fully-differential Amplifiers
THS4504 Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504D ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGK Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGN ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DR Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DR ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4505 Wideband, Low-distortion Fully Differential Amplifier
THS4505D ti THS4505, Wideband, Low-distortion Fully Differential Amplifier
THS4505DGK Wideband, Low-distortion Fully Differential Amplifier
THS4505DGN ti THS4505, Wideband, Low-distortion Fully Differential Amplifier
THS4505DGNR Wideband, Low-distortion Fully Differential Amplifier
THS4505DGNR ti THS4505, Wideband, Low-distortion Fully Differential Amplifier
THS4505DR Wideband, Low-distortion Fully Differential Amplifier

OPA604AU : ti OPA604, FET-Input, Audio Operational Amplifier

SN74ABT640N : Standard Transceivers ti SN74ABT640, Octal Bus Transceivers With 3-State Outputs

SN74F2245DW : Standard Transceivers ti SN74F2245, Octal Bus Transceivers With Series Damping Resistors

TSB81BA3IPFP : Physical Layer Controllers ti TSB81BA3, Ieee P1394b S800 Three-port Cable Transceiver/arbiter

UCC2919 : Power 3v to 8v Hot Swap Power Manager

CD74HCT40103EE4 : High-speed CMOS Logic 4-bit Binary Ripple Counter

CD74HC40103ME4 : High-speed CMOS Logic BCD to 7-segment Latch/decoder/driver for LCDs

TPS71550-Q1 : 50-ma, 24-v, 3.2-ma Supply Current Low-dropout Linear Regulators

TPS62162DSGR : 3-17V 1A 3MHZ Step-Down Converter In 2x2 WSON Package. 3.3V Output Voltage The TPS6216X family is an easy to use synchronous step down DC-DC converter optimized for applications with high power density. A high switching frequency of typically 2.25MHz allows the use of small inductors and provides f

TPS658640ZQZR : Advanced Power Management Unit The TPS658640 provides an easy to use, fully integrated solution for handheld devices, integrating multiple regulated power supplies, system management and display functions in a small package. The I2C interface enables control of a wide range of subsystem parameters.

UCC28911 : 700V Flyback Switcher with Constant-Voltage Constant-Current and Primary-side Regulation The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to pr

0-C     D-L     M-R     S-Z