Details, datasheet, quote on part number: THS4503CDGNR
PartTHS4503CDGNR
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => High-Speed Op Amps (>=50MHz)
Part familyTHS4503 High-Speed Fully-Differential Amplifiers
TitleFully Differential
DescriptionHigh-Speed Fully-Differential Amplifiers 8-MSOP-PowerPAD 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload THS4503CDGNR datasheet
Quote
Find where to buy
 
Specifications 
@ MHz8
Slew Rate(Typ)(V/us)2800
RatingCatalog
GBW(Typ)(MHz)300
Vos (Offset Voltage @ 25C)(Max)(mV)4
FeaturesN/A
Approx. Price (US$)4.36 | 1ku
Vn at Flatband(Typ)(nV/rtHz)6.8
BW @ Acl(MHz)370
ArchitectureFully Differential
Output Current(Typ)(mA)120
3rd Harmonic(dBc)97
Operating Temperature Range(C)0 to 70,-40 to 85
Total Supply Voltage(Min)(+5V=5, +/-5V=10)4.5
Input Bias Current(Max)(pA)4600000
Offset Drift(Typ)(uV/C)10
Acl, min spec gain(V/V)1
Vn at 1kHz(Typ)(nV/rtHz)27
Package GroupMSOP-PowerPAD,SOIC,VSSOP
Total Supply Voltage(Max)(+5V=5, +/-5V=10)15
2nd Harmonic(dBc)83
CMRR(Min)(dB)74
Number of Channels(#)1
Iq per channel(Max)(mA)28
CMRR(Typ)(dB)80
Iq per channel(Typ)(mA)23
Rail-to-RailNo
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DGNHVSSOPS-PDSO-G2500LARGE T&RBCK 331.02.65
Application notes
• Noise Analysis for High Speed Op Amps (Rev. A)
As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predic | Doc
Evaluation Kits
ADS5232EVM: ADS5232 Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter Evaluation Module
ADS5231EVM: ADS5231 Dual-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter Evaluation Module
THS7530EVM: THS7530 Evaluation Module
THS4503EVM: THS4503 Evaluation Module
Spice Model
THS4503 TINA-TI Spice Model (Rev. A) - ZIP (10/04/2011)
THS4503 PSpice Model (Rev. A) - ZIP (10/04/2011)

 

Features, Applications

FEATURES

Fully Differential Architecture Bandwidth: 370 MHz Slew Rate: 2800 V/s IMD3: -95 dBc at 30 MHz OIP3: 51 dBm at 30 MHz Output Common-Mode Control Wide Power Supply Voltage Range: 15 V

APPLICATIONS D High Linearity Analog-to-Digital Converter D Differential Line Driver D Active Filtering of Differential Signals

Preamplifier Wireless Communication Receiver Chains Single-Ended to Differential Conversion

D Centered Input Common-Mode Range D Power-Down Capability (THS4502) D Evaluation Module Available DESCRIPTION

The THS4502 and THS4503 are high-performance fully differential amplifiers from Texas Instruments. The THS4502, featuring power-down capability, and the THS4503, without power-down capability, set new performance standards for fully differential amplifiers with unsurpassed linearity, supporting 14-bit operation through 40 MHz. Package options include the 8-pin SOIC and the 8-pin MSOP with PowerPAD for a smaller footprint, enhanced ac performance, and improved thermal dissipation capability.

THS4140/1 THS4150/1 DESCRIPTION 370 MHz, 2800 V/s, VICR Includes VS- 370 MHz, 2800 V/s, Centered VICR V, 100 MHz, 43 V/s, 3.7 nVHz V, 150 MHz, 51 V/s, 1.3 nVHz V, 160 MHz, 450 V/s, 6.5 nVHz V, 150 MHz, 650 V/s, 7.6 nVHz

(1) Even numbered devices feature power-down capability

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

over operating free-air temperature range unless otherwise noted(1) UNIT

Supply voltage, VS Input voltage, VI Output current, IO (2) Differential input voltage, VID Continuous power dissipation Maximum junction temperature, TJ Operating free-air temperature range, TA: C suffix I suffix Storage temperature range, Tstg

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE D (8 pin) DGN (8 pin) JC (C/W) 4.7 JA(1) (C/W) 167 58.4 POWER RATING 1.11 W
Lead temperature mm (1/16 inch) from case for 10 seconds

MIN Dual supply Supply voltage Operating freeair temperature, TA Single supply C suffix I suffix 0 -40 NOM 5 5 MAX C UNIT V

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) The THS450x may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipative plane for proper power dissipation. Failure do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI technical brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package.

ORDERABLE PACKAGE AND NUMBER TEMPERATURE PLASTIC SMALL OUTLINE(1) (D) THS4502ID THS4503ID PLASTIC MSOP (DGN) THS4502IDGN THS4503IDGN PACKAGE MARKING BCG BCK BCI BCL

(1) This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., THS4502IDR).

= +1, Single-ended input unless otherwise noted. THS4502 AND THS4503 PARAMETER TEST CONDITIONS TYP 25C AC PERFORMANCE = +1, PIN= -20 dBm, = 392 Small-signal bandwidth = +2, PIN= -30 dBm, Rf +5, PIN= -30 dBm, = +10, PIN = -30 dBm, 1.3 k Gain-bandwidth product Bandwidth for 0.1dB flatness Large-signal bandwidth Slew rate Rise time Fall time Settling time 0.01% 0.1% Harmonic distortion 2nd harmonic 3rd harmonic Third-order intermodulation distortion Third-order output intercept point Input voltage noise Input current noise Overdrive recovery time DC PERFORMANCE Open-loop voltage gain Input offset voltage Average offset voltage drift Input bias current Average bias current drift Input offset current Average offset current drift INPUT Common-mode input range Common-mode rejection ratio Input impedance OUTPUT Differential output voltage swing Differential output current drive Output balance error Closed-loop output impedance (single-ended) = 20 PIN = -20 dBm, = 100 kHz = 1 MHz mA dB Min Typ dB pF Min Typ dB mV V/C A nA/C A nA/C Min Max Typ Max Typ Max Typ > +10 PIN = -20 dBm VP VPP Step 2 VPP Step 2 VPP Step = 4 VPP = 4 VPP = 2 VPP = 8 MHz = 30 MHz = 8 MHz = 30 MHz = 30 MHz, Rf kHz tone spacing = 30 MHz, 392 , Referenced > 1 MHz > 100 kHz Overdrive 5.5 V dBc dBm nV/Hz pA/Hz ns MHz V/s ns Typ 25C OVER TEMPERATURE to 85C UNITS MIN/ TYP/ MAX


 

Related products with the same datasheet
THS4503CDGN
THS4503CDR
THS4503ID
THS4503IDGN
THS4503IDGNR
THS4503IDR
Some Part number from the same manufacture Texas Instruments, Inc.
THS4503CDR High-speed Fully-differential Amplifiers
THS4503CDR ti THS4503, High-speed Fully-differential Amplifiers
THS4503ID High-speed Fully-differential Amplifiers
THS4503ID ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDGK High-speed Fully-differential Amplifiers
THS4503IDGN ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDGNR High-speed Fully-differential Amplifiers
THS4503IDGNR ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDR High-speed Fully-differential Amplifiers
THS4503IDR ti THS4503, High-speed Fully-differential Amplifiers
THS4504 Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504D ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGK Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGN ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DR Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DR ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4505 Wideband, Low-distortion Fully Differential Amplifier
THS4505D ti THS4505, Wideband, Low-distortion Fully Differential Amplifier
THS4505DGK Wideband, Low-distortion Fully Differential Amplifier

CY54FCT245TSOIC : 8-bit Transceiver

SNJ5454W : ti SN5454, 4-Wide And-or-invert Gates

SNJ54HC541J : Inverting Buffers and Drivers ti SN54HC541, Octal Buffers And Line Drivers With 3-State Outputs

TLC2558MFKB : 5-v, 12-bit, 400 Ksps, 8 Channel, Low Power, Serial Analog-to-digital Converters With Auto Power Down

TPA711DGNR : ti TPA711, Mono Class-ab Audio Amplifier With Mono Headphone Drive

CC2510F32 : The CC2510Fx/CC2511Fx is a low-cost true system-on-chip (SoC) device designed for low-power and low-voltage wireless communication applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, 8/16/32

TS5N118 : 1-of-8 FET Multiplexer/demultiplexer High-bandwidth BUS Switch

ADS62P42EVM : Eval Board - Analog To Digital Converter (adcs) Programmers, Development System; ADS62P42EVM Specifications: Number of ADC's: 2 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

74AHCT16540DGVRG4 : Logic - Gate And Inverter Integrated Circuit (ics) Inverter Tape & Reel (TR) 8mA, 8mA 4.5 V ~ 5.5 V; IC INVERTER DUAL 8-INPUT 48TVSOP Specifications: Number of Circuits: 2 ; Package / Case: 48-TFSOP (0.173", 4.40mm Width) ; Logic Type: Inverter ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Inputs: 8 ; Current - Output High, Low: 8mA, 8mA ; Operating Temperature: -40C ~ 85C ; Voltage - Supply: 4.5 V

SN74AUP1G06DRYR : Low-power Single Inverter Buffer/driver With Open-drain Outputs

TPS51200QDRCRQ1 : IC REG SINK/SOURCE DDR 10SON Texas Instruments' TPS5120 is a dual-channel, high-efficiency synchronous buck controller where the outputs run 180° out of phase, which lowers the input current ripple, thereby reducing the input capacitance cost. The PWM/SKIP pin allows the operating mode to switch from PWM mode to skip mod

 
0-C     D-L     M-R     S-Z