Details, datasheet, quote on part number: THS4503CD
PartTHS4503CD
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => High-Speed Op Amps (>=50MHz)
Part familyTHS4503 High-Speed Fully-Differential Amplifiers
TitleFully Differential
DescriptionHigh-Speed Fully-Differential Amplifiers 8-SOIC 0 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload THS4503CD datasheet
Quote
Find where to buy
 
Specifications 
@ MHz8
Slew Rate(Typ)(V/us)2800
RatingCatalog
GBW(Typ)(MHz)300
Vos (Offset Voltage @ 25C)(Max)(mV)4
FeaturesN/A
Approx. Price (US$)4.36 | 1ku
Vn at Flatband(Typ)(nV/rtHz)6.8
BW @ Acl(MHz)370
ArchitectureFully Differential
Output Current(Typ)(mA)120
3rd Harmonic(dBc)97
Operating Temperature Range(C)0 to 70,-40 to 85
Total Supply Voltage(Min)(+5V=5, +/-5V=10)4.5
Input Bias Current(Max)(pA)4600000
Offset Drift(Typ)(uV/C)10
Acl, min spec gain(V/V)1
Vn at 1kHz(Typ)(nV/rtHz)27
Package GroupMSOP-PowerPAD,SOIC,VSSOP
Total Supply Voltage(Max)(+5V=5, +/-5V=10)15
2nd Harmonic(dBc)83
CMRR(Min)(dB)74
Number of Channels(#)1
Iq per channel(Max)(mA)28
CMRR(Typ)(dB)80
Iq per channel(Typ)(mA)23
Rail-to-RailNo
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DSOICR-PDSO-G75TUBE4503C 3.914.91.581.27
Application notes
• Noise Analysis for High Speed Op Amps (Rev. A)
As system bandwidths have increased, an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not, however, particularly comfortable with the calculations required to predic | Doc
Evaluation Kits
ADS5232EVM: ADS5232 Dual-Channel, 12-Bit, 65-MSPS Analog-to-Digital Converter Evaluation Module
ADS5231EVM: ADS5231 Dual-Channel, 12-Bit, 40-MSPS Analog-to-Digital Converter Evaluation Module
THS7530EVM: THS7530 Evaluation Module
THS4503EVM: THS4503 Evaluation Module
Spice Model
THS4503 TINA-TI Spice Model (Rev. A) - ZIP (10/04/2011)
THS4503 PSpice Model (Rev. A) - ZIP (10/04/2011)

 

Features, Applications

FEATURES

Fully Differential Architecture Bandwidth: 370 MHz Slew Rate: 2800 V/s IMD3: -95 dBc at 30 MHz OIP3: 51 dBm at 30 MHz Output Common-Mode Control Wide Power Supply Voltage Range: 15 V

APPLICATIONS D High Linearity Analog-to-Digital Converter D Differential Line Driver D Active Filtering of Differential Signals

Preamplifier Wireless Communication Receiver Chains Single-Ended to Differential Conversion

D Centered Input Common-Mode Range D Power-Down Capability (THS4502) D Evaluation Module Available DESCRIPTION

The THS4502 and THS4503 are high-performance fully differential amplifiers from Texas Instruments. The THS4502, featuring power-down capability, and the THS4503, without power-down capability, set new performance standards for fully differential amplifiers with unsurpassed linearity, supporting 14-bit operation through 40 MHz. Package options include the 8-pin SOIC and the 8-pin MSOP with PowerPAD for a smaller footprint, enhanced ac performance, and improved thermal dissipation capability.

THS4140/1 THS4150/1 DESCRIPTION 370 MHz, 2800 V/s, VICR Includes VS- 370 MHz, 2800 V/s, Centered VICR V, 100 MHz, 43 V/s, 3.7 nVHz V, 150 MHz, 51 V/s, 1.3 nVHz V, 160 MHz, 450 V/s, 6.5 nVHz V, 150 MHz, 650 V/s, 7.6 nVHz

(1) Even numbered devices feature power-down capability

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.

UNLESS OTHERWISE NOTED this document contains PRODUCTION DATA information current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

over operating free-air temperature range unless otherwise noted(1) UNIT

Supply voltage, VS Input voltage, VI Output current, IO (2) Differential input voltage, VID Continuous power dissipation Maximum junction temperature, TJ Operating free-air temperature range, TA: C suffix I suffix Storage temperature range, Tstg

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE D (8 pin) DGN (8 pin) JC (C/W) 4.7 JA(1) (C/W) 167 58.4 POWER RATING 1.11 W
Lead temperature mm (1/16 inch) from case for 10 seconds

MIN Dual supply Supply voltage Operating freeair temperature, TA Single supply C suffix I suffix 0 -40 NOM 5 5 MAX C UNIT V

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. (2) The THS450x may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipative plane for proper power dissipation. Failure do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI technical brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package.

ORDERABLE PACKAGE AND NUMBER TEMPERATURE PLASTIC SMALL OUTLINE(1) (D) THS4502ID THS4503ID PLASTIC MSOP (DGN) THS4502IDGN THS4503IDGN PACKAGE MARKING BCG BCK BCI BCL

(1) This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., THS4502IDR).

= +1, Single-ended input unless otherwise noted. THS4502 AND THS4503 PARAMETER TEST CONDITIONS TYP 25C AC PERFORMANCE = +1, PIN= -20 dBm, = 392 Small-signal bandwidth = +2, PIN= -30 dBm, Rf +5, PIN= -30 dBm, = +10, PIN = -30 dBm, 1.3 k Gain-bandwidth product Bandwidth for 0.1dB flatness Large-signal bandwidth Slew rate Rise time Fall time Settling time 0.01% 0.1% Harmonic distortion 2nd harmonic 3rd harmonic Third-order intermodulation distortion Third-order output intercept point Input voltage noise Input current noise Overdrive recovery time DC PERFORMANCE Open-loop voltage gain Input offset voltage Average offset voltage drift Input bias current Average bias current drift Input offset current Average offset current drift INPUT Common-mode input range Common-mode rejection ratio Input impedance OUTPUT Differential output voltage swing Differential output current drive Output balance error Closed-loop output impedance (single-ended) = 20 PIN = -20 dBm, = 100 kHz = 1 MHz mA dB Min Typ dB pF Min Typ dB mV V/C A nA/C A nA/C Min Max Typ Max Typ Max Typ > +10 PIN = -20 dBm VP VPP Step 2 VPP Step 2 VPP Step = 4 VPP = 4 VPP = 2 VPP = 8 MHz = 30 MHz = 8 MHz = 30 MHz = 30 MHz, Rf kHz tone spacing = 30 MHz, 392 , Referenced > 1 MHz > 100 kHz Overdrive 5.5 V dBc dBm nV/Hz pA/Hz ns MHz V/s ns Typ 25C OVER TEMPERATURE to 85C UNITS MIN/ TYP/ MAX


 

Related products with the same datasheet
THS4503CDGN
THS4503CDGNR
THS4503CDR
THS4503ID
THS4503IDGN
THS4503IDGNR
THS4503IDR
Some Part number from the same manufacture Texas Instruments, Inc.
THS4503CDGK High-speed Fully-differential Amplifiers
THS4503CDGN ti THS4503, High-speed Fully-differential Amplifiers
THS4503CDGNR High-speed Fully-differential Amplifiers
THS4503CDGNR ti THS4503, High-speed Fully-differential Amplifiers
THS4503CDR High-speed Fully-differential Amplifiers
THS4503CDR ti THS4503, High-speed Fully-differential Amplifiers
THS4503ID High-speed Fully-differential Amplifiers
THS4503ID ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDGK High-speed Fully-differential Amplifiers
THS4503IDGN ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDGNR High-speed Fully-differential Amplifiers
THS4503IDGNR ti THS4503, High-speed Fully-differential Amplifiers
THS4503IDR High-speed Fully-differential Amplifiers
THS4503IDR ti THS4503, High-speed Fully-differential Amplifiers
THS4504 Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504D ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGK Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGN ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DGNR ti THS4504, Wideband, Low Distortion Fully Differential Amplifier With Shutdown
THS4504DR Wideband, Low Distortion Fully Differential Amplifier With Shutdown

74ACT11657 : Bus Oriented Circuits Octal Transceiver With Parity Generator/checker And 3-state Outputs

PT3401A : 3.3V 10A, 48-V Input ISOlated DC/DC Converter

PT4471A : Plug-in Power Solutions->Isolated->Single Output ti PT4471, 100W 24V Input 30A Programmable DC-DC Converter

CD74ACT174MG4 : D-Type Flip-Flops ti CD74ACT174, Hex D-type Flip-flops With Reset

ONET8501PBRGTT : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) Limiting Cut Tape (CT) 50mA 2.95 V ~ 3.6 V; IC OPAMP LIMITING 9GHZ SGL 16QFN Specifications: Packaging: Cut Tape (CT) ; Amplifier Type: Limiting ; Number of Circuits: 1 ; Package / Case: 16-VFQFN Exposed Pad ; Slew Rate: - ; Gain Bandwidth Product: - ; Current - Supply: 50mA ; Current - Output / Channel: - ; Voltage - Supply, Single/Dual (): 2.95 V ~ 3.6 V ; Output Type: -

TLV70212DBVT : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 1.2V 300MA SOT23-5 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

74FCT162501ATPVCG4 : Universal Bus Transceivers (UBTs) ti CY74FCT162501T, 18-Bit Universal Bus Transceivers With 3-State Outputs

TPIC8101EVM : Interface Development Tools Knock Sensor Interface Specifications: Manufacturer: Texas Instruments ; Product Category: Interface Development Tools ; Brand: Texas Instruments ; Product: Evaluation Modules ; Type: Sensor Interface ; Tool Is For Evaluation Of: TPIC8101 ; Interface Type: SPI ; Operating Supply Voltage: 5 V

Same catergory

CWB2214CP : Wideband C/dmos Analog Switches & Multiplexers. The is a High Speed SPST Analog Switch designed utilizing Calogic's proprietary CMOS/DMOS processing techniques. The device low-power CMOS input logic and level translation circuitry and high speed, low capacitance lateral DMOS switches fabricated together in a monolithic structure. ORDERING INFORMATION Part Package Temperature Range 85oC CWB2214CP.

GL3276A : 30-80 Khz, 6 V, Bipolar Analog ic. The is a bipolar analog ICs specifically developed for use in infrared remote control system receiving preamplifiers. Capable of accepting a photodiode directly, these ICs house a high gain initial amplifier, a limiter, a band-pass filter, a detection circuit and a waveform shaping circuit assembled on a single chip. Less changes of malfunction associated.

HA1-5104883 : Low Noise, High Performance, Quad Operational Amplifier. Low Noise, High Performance, Quad Operational Amplifier Low noise and high performance are key words describing the unity gain stable HA-5104/883. This general purpose quad amplifier offers an array of dynamic s including 1V/s slew rate (min), and 8MHz bandwidth (typ). Complementing these outstanding parameters are very low noise s at 1kHz (typ) or 6nV/Hz.

HA1-5134-5 : 4mhz, Precision, Quad Operational Amplifier. The is a precision quad operational amplifier that is pin compatible with the OP11, RM4156, and LM148 as well as the HA-4741. Each amplifier guaranteed maximum values for offset voltage of 200V, offset voltage drift of 2V/oC, and offset current of 75nA over the full temperature range while CMRR/PSRR is guaranteed greater than 94dB and AVOL is guaranteed.

IMP705 : Power. Low-power up Supervisor Circuit. Watc hdog timer Br o wnout det ection w er suppl y monit or The IMP705/706/707/708 and IMP813L CMOS supervisor circuits monitor power-supply and battery voltage level, and P/C operation. Compared to pin-compatible devices offered by Maxim Integrated Products, IMP devices feature 60 percent lower maximum supply current. The family offers several.

LA6082M : J-FET Input Dual Operational Amplifier.

LA8638V : Low-voltage Compander ic For Cordless Telephone. The LA8638V provides dynamic range expansion, noise suppression for enhancing the quality of audio signals in cordless telephones and other communications systems. This single chip provides the functions that make it ideal for cordless telephones: a compressor with a logarithmic compression ratio of 1/2, expander with a logarithmic expansion ratio of 2, splatter.

MPY634 : . q WIDE BANDWIDTH: 10MHz typ q 0.5% MAX FOUR-QUADRANT ACCURACY q INTERNAL WIDE-BANDWIDTH OP AMP q EASY TO USE q LOW COST The is a wide bandwidth, high accuracy, four-quadrant analog multiplier. Its accurately lasertrimmed multiplier characteristics make it easy to use in a wide variety of applications with a minimum of external parts, often eliminating.

TIC30C : General Purpose Amplifier And Switching Applications.

TL33074ADW : ti TL33074A, High-Slew-Rate, Single-supply Operational Amplifier. Wide Gain-Bandwidth Product. 4.5 MHz High Slew Rate. 13 V/s Fast Settling Time. to 0.1% Wide-Range Single-Supply Operation 44 V Wide Input Common-Mode Range Includes Ground (VCC Low Total Harmonic Distortion. 0.02% Low Input Offset Voltage. 3 mV Max (A Suffix) Large Output Voltage Swing 14 V (With 15-V Supplies) Large Capacitance Drive Capability.

TLE2064AMFK : Excalibur JFET-input High-output-drive Mpower Operational Amplifiers. TLE206xB, TLE206xY EXCALIBUR JFET-INPUT HIGH-OUTPUT-DRIVE POWER OPERATIONAL AMPLIFIERS 2 Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers Low Supply Current. 290 A/Ch Typ On-chip Offset Voltage Trimming for Improved DC Performance High Output Drive, Specified into 100- Loads Lower Noise Floor Than Earlier Generations of Low-Power BiFETs.

UC1861 : Power. Resonant-mode Power Supply Controllers. Controls Zero Current Switched (ZCS) The UC1861-1868 family of ICs is optimized for the control of Zero Current or Zero Voltage Switched (ZVS) Switched and Zero Voltage Switched quasi-resonant converters. DifferQuasi-Resonant Converters ences between members of this device family result from the various combinations of UVLO thresholds and output options.

UPC1658G : Low Noise, High Frequency si Mmic Amplifier. The is a silicon monolithic integrated circuit designed as amplifier for high frequency system applications. Bandwidth and output power level can be determined according to external resistor constants of negative feedback and final stage collector. This IC is available in 8-pin plastic SOP. This IC is manufactured using NEC's 10 GHz fT NESATTM II silicon.

LT6556 : 750MHz Gain of 1 Triple 2:1Video Multiplexer The LT6556 is a high speed triple 2:1 video multiplexer with an internally fixed gain of 1. The individual buffers are optimized for performance with a 1k load and feature a 2VP-P -3dB bandwidth of 450MHz, making them ideal for driving very high resolution video signals. Separate power supply pins for each.

LM2901 : Comparators Low power quad operational amplifier. Wide single supply voltage range or dual supplies for all devices: to 18V Very low supply current (1.1mA) independent of supply voltage at +5V) Low input bias current: 25nA typ. Low input offset current: 5nA typ. Input common-mode voltage range includes negative rail Low output saturation voltage: 250mV typ. (IO = 4mA) Differential input voltage range.

AD5293 : Single Channel, 1024-Position, 1% R-Tol, Digital Potentiometer The AD5293 is a single-channel, 1,024-position digital potentiometer1 with less than 1% end-to-end Resistor Tolerance error. The AD5293 performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution, solid state reliability, and superior low temperature.

 
0-C     D-L     M-R     S-Z