Details, datasheet, quote on part number: BQ2057WSNTR
PartBQ2057WSNTR
CategorySemiconductors => Power Management => Battery Management Products => Battery Charger IC
Part familyBQ2057W Low Dropout Linear 2-cell Li-Ion Charge Controller with AutoCompTM, 8.4V
DescriptionLow Dropout Linear 2-cell Li-Ion Charge Controller with AutoCompTM, 8.4V 8-SOIC -20 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleNo
DatasheetDownload BQ2057WSNTR datasheet
Quote
Find where to buy
 
Specifications 
Package GroupSOIC,TSSOP
Cell ChemistryLi-Ion/Li-Polymer
Control InterfaceStandalone (RC-Settable)
FeaturesTemp Monitoring (Thermistor Pin)
Operating Vin(Max)(V)15
Operating Vin(Min)(V)4.5
Battery Charge Voltage(Min)(V)8.4
Approx. Price (US$)0.77 | 1ku
Absolute Vin (safety rating)(Max)((V))18
Battery Charge Voltage(Max)(V)8.4
Control TopologyLinear
Number of Series Cells2
Charge Current(Max)(A)2
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DSOICR-PDSO-G2500LARGE T&R2057W 3.914.91.581.27
Evaluation Kits
DV2057W: BQ2057W Evaluation Module for Li-Ion, linear (8.4V), two cells

 

Features, Applications

ADVANCED LINEAR CHARGE MANAGEMENT IC FOR SINGLE- AND TWO-CELL LITHIUM-ION AND LITHIUM-POLYMER

8.4 V) Li-Ion or Li-Pol Packs Requires Small Number of External Components 0.3 V Dropout Voltage for Minimizing Heat Dissipation Better Than ±1% Voltage Regulation Accuracy With Preset Voltages AutoCompt Dynamic Compensation of Battery Pack's Internal Impedance to Reduce Charge Time Optional Cell-Temperature Monitoring Before and During Charge Integrated Voltage and Current Regulation With Programmable Charge-Current and Highor Low-Side Current Sensing Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage Of Charge Status Output for Single or Dual Led or Host Processor Interface Automatic Battery-Recharge Feature Charge Termination by Minimum Current Automatic Low-Power Sleep Mode When VCC Is Removed EVMs Available for Quick Evaluation Packaging: 8-Pin SOIC, 8-Pin TSSOP, 8-Pin MSOP

or bq2057xTS SOIC (SN) or TSSOP (TS) PACKAGE (TOP VIEW)
DESCRIPTION

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for costsensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057 inhibits charge until the battery temperature is within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V(min), the bq2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external passelement during the initial stage of the charge. After conditioning, the bq2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. AutoComp is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The bq2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than ±1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the bq2057 is offered in four fixed-voltage versions: 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I(TERM). The bq2057 automatically restarts the charge if the battery voltage falls below the V(RCH) threshold. The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

AVAILABLE OPTIONS PACKAGE TA CHARGE REGULATION VOLTAGE 8.4 V Note the difference in pinout for this package. SOIC (SN) Not available bq2057CSN Not available bq2057WSN TSSOP (TS) bq2057TTS bq2057WTS Not available MSOP (DGK) bq2057DGK bq2057CDGK

TS1 Trip I-Control 0.5 VCC SNS VCC­V(SNS) VSS­V(SNS) + _ Charge Termination Current Regulation High/Low SNS Set


 

Related products with the same datasheet
BQ2057WTS
BQ2057WTSTR
Some Part number from the same manufacture Texas Instruments, Inc.
BQ2057WTS ti BQ2057W, Li-ion Low-dropout Linear (8.4V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2058 Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058CSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058D Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058DSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058F Lithium Ion Pack Supervisor For 3- And 4-cell Packs
bQ2058FSN
BQ2058J
bQ2058JSN
BQ2058K
bQ2058KSN
BQ2058M
bQ2058MSN
BQ2058RSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
bQ2058SN Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058SN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058T Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058TRSN-C2 ti BQ2058T, 2-Cell Lithium-ion Pack Supervisor ic
BQ2060 Gas Gauge ic With Smbus-like Interface
BQ2060A Multi-chemistry SBS 1.1 Compliant Gas Gauge With 5 Led Drivers, Additional Battery MGMT Control
BQ2060A-E619DBQ ti BQ2060A, Multi-chemistry SBS 1.1 Compliant Gas Gauge With 5 Led Drivers, Additional Battery MGMT Control

5962-9460205Q2A : ti TLE2072A, Excalibur Low-noise High-speed JFET-input Dual Operational Amplifier

SN74ACT3641-20PCB : Synchronous FIFOs ti SN74ACT3641, 1024 X 36 Synchronous Fifo Memory

TPS40051QPWPRQ1 : Q1 - Automotive Catalog Wide-input Synchronous Buck Controller

PTH05T210WAST : 30-A, 4.5V to 5.5V Input, Non-Isolated, Wide Output Adjustable Power Module with TurboTrans The PTH05T210W is a high-performance 30-A rated, non-isolated power module which utilizes a multi-phase, switch-mode topology. This module represents the 2nd generation of the PTH series power modules which

ADS1000 : The ADS1000 is an I2C-compatible serial interface Analog-to-Digital (A/D) converter with differential inputs and 12 bits of resolution in a tiny SOT23-6 package. Conversions are performed ratiometrically, using the power supply as the reference voltage. The ADS1000 operates from a single power suppl

BQ20Z75 : SBS 1.1-COMPLIANT GAS GAUGE AND PROTECTION-ENABLED IC WITH IMPEDANCE TRACKT The bq20z75 SBS-compliant gas gauge and protection IC is a single IC solution designed for battery-pack or in-system installation. The bq20z75 measures and maintains an accurate record of available charge in Li-ion or Li-po

TRS3318CPWR : 2.5-v 460-kbps Rs-232 Transceiver WITH ˇ˙15-kv ESD Protection

PCI4515 : Single Socket Cardbus Controller WITH Integrated

MAX3237E(MEGABAUD) : 3-V TO 5.5-v Multichannel Rs-232 1-mbit/s LINE Driver/receiver

CD74HC4075PWRG4 : 4-CHANNEL, DIFFERENTIAL MULTIPLEXER, PDSO16 Specifications: Applications: Military ; Supply Voltage (VS): -4.5 to 6 volts ; Ron: 130 ohms ; tON: 46 ns ; tOFF: 38 ns ; VISO: 67 dB ; &nb916;RON: 5 ohms ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Package Type: SOIC, PLASTIC, MS-012AC, SOIC-16 ; Number of Pins: 16 ; Number of Devices:

COP8SGE744V8XXX : 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PDSO28 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 10 MHz ; ROM Type: OTP ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 24 ; Package Type: SOIC, Other, PLASTIC, SOIC-28 ; Operating Range: Auto ; Pin Count: 28 ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Features: PWM

OPA4196IDR : Operational Amplifiers - Op Amps 36V, Low Power All-PurposeAmplifier

 
0-C     D-L     M-R     S-Z