Details, datasheet, quote on part number: BQ2057PN-C1
PartBQ2057PN-C1
CategoryPower Management => Battery Management => Battery Chargers => Battery Chargers/Controllers
TitleBattery Chargers/Controllers
DescriptionAdvanced Li-ion Linear Charge Management ic
CompanyTexas Instruments, Inc.
DatasheetDownload BQ2057PN-C1 datasheet
  

 

Features, Applications

ADVANCED LINEAR CHARGE MANAGEMENT IC FOR SINGLE- AND TWO-CELL LITHIUM-ION AND LITHIUM-POLYMER

8.4 V) Li-Ion or Li-Pol Packs Requires Small Number of External Components 0.3 V Dropout Voltage for Minimizing Heat Dissipation Better Than ±1% Voltage Regulation Accuracy With Preset Voltages AutoCompt Dynamic Compensation of Battery Pack's Internal Impedance to Reduce Charge Time Optional Cell-Temperature Monitoring Before and During Charge Integrated Voltage and Current Regulation With Programmable Charge-Current and Highor Low-Side Current Sensing Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage Of Charge Status Output for Single or Dual Led or Host Processor Interface Automatic Battery-Recharge Feature Charge Termination by Minimum Current Automatic Low-Power Sleep Mode When VCC Is Removed EVMs Available for Quick Evaluation Packaging: 8-Pin SOIC, 8-Pin TSSOP, 8-Pin MSOP

or bq2057xTS SOIC (SN) or TSSOP (TS) PACKAGE (TOP VIEW)
DESCRIPTION

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for costsensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057 inhibits charge until the battery temperature is within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V(min), the bq2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external passelement during the initial stage of the charge. After conditioning, the bq2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. AutoComp is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The bq2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than ±1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the bq2057 is offered in four fixed-voltage versions: 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I(TERM). The bq2057 automatically restarts the charge if the battery voltage falls below the V(RCH) threshold. The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

AVAILABLE OPTIONS PACKAGE TA CHARGE REGULATION VOLTAGE 8.4 V Note the difference in pinout for this package. SOIC (SN) Not available bq2057CSN Not available bq2057WSN TSSOP (TS) bq2057TTS bq2057WTS Not available MSOP (DGK) bq2057DGK bq2057CDGK

TS1 Trip I-Control 0.5 VCC SNS VCC­V(SNS) VSS­V(SNS) + _ Charge Termination Current Regulation High/Low SNS Set


 

Some Part number from the same manufacture Texas Instruments, Inc.
BQ2057SN ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057T
BQ2057TS ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TSN ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057TSTR ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TTS ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057W
BQ2057WSN ti BQ2057W, Li-ion Low-dropout Linear (8.4V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2058 Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058CSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058D Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058DSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058F Lithium Ion Pack Supervisor For 3- And 4-cell Packs
bQ2058FSN
BQ2058J
bQ2058JSN
BQ2058K
bQ2058KSN
BQ2058M
bQ2058MSN
BQ2058RSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic

5962-9959301QPA : ti THS4011, 290-MHz Low-distortion Voltage-feedback Amplifier

SN100KT5542DW : ECL/TTL Functions ti SN100KT5542, Octal Ttl-to-ecl Translators With Output Enable

SN74AS876NT : D-Type (3-State) Flip-Flops ti SN74AS876, Dual 4-Bit D-type Edge-triggered Flip-flops

TMS320DM642GNZ500 : Video/imaging Fixed-point Digital Signal Processorthe TMS320C64x DSPS (including The TMS320DM642 Device) Are The Highest-performance Fixed-point DSP Generation in The TMS320C6000 DSP Platform. The TMS320DM642 (DM642) Device is Based on The Second-generation High-performance, Advanced Velociti

TSB14AA1PFB : Physical Layer Controllers ti TSB14AA1, Ieee 1394-1995, 3.3V, 1-port,50/100Mbps, Backplane PHY

TPS650243RHBR : Power Management ICs For Li-Ion Powered Systems The TPS65024x are integrated Power Management ICs for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS65024x provide three highly efficient, step-down converters targeted at providing the core voltage,

INA211AIDCKR : Voltage Output, High/Low-Side Measurement, Bi-Directional Zero-Drift Series Current Shunt Monitor The INA210, INA211, INA212, INA213, and INA214 are voltage output current shunt monitors that can sense drops across shunts at common-mode voltages from -0.3V to 26V, independent of the supply voltage.

74S05 : HEX Inverter WITH Open-collector Outputs

TLV342AIDE4 : Low-voltage Rail-to-rait Output CMOS Operational Amplifiers

TPS40210-HT : Wide Input Range Current Mode Boost Controller he TPS40210 is a wide input voltage (5.5 V to 52 V) non-synchronous boost controller. It is suitable for topologies that require a grounded source N-channel FET, including boost, flyback, SEPIC, and various LED driver applications. Device features incl

 
0-C     D-L     M-R     S-Z