Details, datasheet, quote on part number: BQ2057CTS-C1TR
PartBQ2057CTS-C1TR
CategoryPower Management => Battery Management => Battery Chargers
Descriptionti BQ2057C, Li-ion Low-dropout Linear (4.2V) Charge Management ic For One-cell Applications With Autocomptm
CompanyTexas Instruments, Inc.
DatasheetDownload BQ2057CTS-C1TR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

ADVANCED LINEAR CHARGE MANAGEMENT IC FOR SINGLE- AND TWO-CELL LITHIUM-ION AND LITHIUM-POLYMER

8.4 V) Li-Ion or Li-Pol Packs Requires Small Number of External Components 0.3 V Dropout Voltage for Minimizing Heat Dissipation Better Than ±1% Voltage Regulation Accuracy With Preset Voltages AutoCompt Dynamic Compensation of Battery Pack's Internal Impedance to Reduce Charge Time Optional Cell-Temperature Monitoring Before and During Charge Integrated Voltage and Current Regulation With Programmable Charge-Current and Highor Low-Side Current Sensing Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage Of Charge Status Output for Single or Dual Led or Host Processor Interface Automatic Battery-Recharge Feature Charge Termination by Minimum Current Automatic Low-Power Sleep Mode When VCC Is Removed EVMs Available for Quick Evaluation Packaging: 8-Pin SOIC, 8-Pin TSSOP, 8-Pin MSOP

or bq2057xTS SOIC (SN) or TSSOP (TS) PACKAGE (TOP VIEW)
DESCRIPTION

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for costsensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057 inhibits charge until the battery temperature is within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V(min), the bq2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external passelement during the initial stage of the charge. After conditioning, the bq2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. AutoComp is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The bq2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than ±1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the bq2057 is offered in four fixed-voltage versions: 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I(TERM). The bq2057 automatically restarts the charge if the battery voltage falls below the V(RCH) threshold. The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

AVAILABLE OPTIONS PACKAGE TA CHARGE REGULATION VOLTAGE 8.4 V Note the difference in pinout for this package. SOIC (SN) Not available bq2057CSN Not available bq2057WSN TSSOP (TS) bq2057TTS bq2057WTS Not available MSOP (DGK) bq2057DGK bq2057CDGK

TS1 Trip I-Control 0.5 VCC SNS VCC­V(SNS) VSS­V(SNS) + _ Charge Termination Current Regulation High/Low SNS Set


 

Related products with the same datasheet
BQ2057CDGKR
BQ2057CSN
BQ2057CSN-C1
BQ2057CSN-C1TR
BQ2057CSNTR
BQ2057CTS
BQ2057CTS-C1
BQ2057CTSTR
Some Part number from the same manufacture Texas Instruments, Inc.
BQ2057CTSTR ti BQ2057C, Li-ion Low-dropout Linear (4.2V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057DGK ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057PN-C1 Advanced Li-ion Linear Charge Management ic
BQ2057SN ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057T
BQ2057TS ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TSN ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057TSTR ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TTS ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057W
BQ2057WSN ti BQ2057W, Li-ion Low-dropout Linear (8.4V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2058 Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058CSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058D Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058DSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058F Lithium Ion Pack Supervisor For 3- And 4-cell Packs
bQ2058FSN
BQ2058J
bQ2058JSN
BQ2058K
bQ2058KSN

ADS8412 : 16 Bit 2MSPS Parallel ADC W/Ref, Pseudo Bipolar Fully Differential Input

OP27CFK : Low-noise High-speed Precision Operational Amplifiers

OPA2137U : ti OPA2137, Low Cost Fet-input Operational Amplifiers

SN54LS298W : Quadruple 2-input Multiplexers With Storage

SN74AUC2G86YZPR : ti SN74AUC2G86, Dual 2-INPUT Exclusive-OR GATE

TLV2264AID : ti TLV2264A, Advanced LinCMOS(TM) Rail-to-rail Quad Operational Amplifier

UC1584 : Secondary Side Synchronous Post Regulator

UCC2975PW : Multi-topology Piezoelectric Transformer Controller

TPS54290PWPR : 4.5V To 18V Input, 1.5/2.5A, 300 KHz Dual Synchronous Step Down SWIFT™ Converter TPS54290/1/2 is a dual output fully synchronous buck converter capable of supporting applications with a minimal number of external components. It operates from a 4.5 V to 18 V input supply voltage, and supports output

SN74AHC74DRE4 : HEX Inverters

TPS53353 : High-Efficiency 20-A Synchronous Buck Converter In PowerStack™ Package TPS53353 is a D-CAP™ mode, 20-A synchronous switcher with integrated MOSFETs. It is designed for ease of use, low external component count, and space-conscious power systems. This device features 5.5-m? / 2.2-m? integrated MO

VSP2562PTG4 : Data Acquisition - Analog Front End (afe) Integrated Circuit (ics) Tray 2.7 V ~ 3.6 V; IC CCD SIGNAL PROC 12BIT 48-LQFP Specifications: Package / Case: 48-LQFP ; Voltage - Supply, Digital: 2.7 V ~ 3.6 V ; Voltage - Supply, Analog: 2.7 V ~ 3.6 V ; Number of Bits: 12 ; Number of Channels: 2 ; Packaging: Tray ; Power (Watts): 86mW ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

 
0-C     D-L     M-R     S-Z