Details, datasheet, quote on part number: BQ2057
PartBQ2057
CategorySemiconductors => Power Management => Battery Management Products => Battery Charger IC
Part familyBQ2057 Low Dropout Linear 1-cell Li-Ion Charge Controller with AutoCompTM, 4.1V
TitleBattery Chargers/Controllers
DescriptionLow Dropout Linear 1-cell Li-Ion Charge Controller with AutoCompTM, 4.1V 8-VSSOP -20 to 70
CompanyTexas Instruments, Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload BQ2057 datasheet
Cross ref.Similar parts: MAX1679, LTC692CS8, LTC692IS8, LTC692CS8#PBF, LTC692CS8#TRPBF, LTC692IS8#PBF, LTC692IS8#TRPBF, LTC1731CMS8-4.1, LTC1731CMS8-4.2, LTC1731CMS8-8.2
Quote
Find where to buy
 
Specifications 
Cell ChemistryLi-Ion/Li-Polymer
Battery Charge Voltage(Max)(V)4.1
Approx. Price (US$)0.71 | 1ku
Control InterfaceStandalone (RC-Settable)
FeaturesTemp Monitoring (Thermistor Pin)
Operating Vin(Max)(V)15
Package GroupSOIC,TSSOP,VSSOP
Battery Charge Voltage(Min)(V)4.1
Operating Vin(Min)(V)4.5
Absolute Vin (safety rating)(Max)((V))18
Control TopologyLinear
Charge Current(Max)(A)2
Number of Series Cells1
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DGKVSSOPR-PDSO-G80TUBE2057 33.97.65
Evaluation Kits
DV2057: BQ2057 Evaluation Module for Li-Ion, linear (4.1V), one cell

 

Features, Applications

ADVANCED LINEAR CHARGE MANAGEMENT IC FOR SINGLE- AND TWO-CELL LITHIUM-ION AND LITHIUM-POLYMER

8.4 V) Li-Ion or Li-Pol Packs Requires Small Number of External Components 0.3 V Dropout Voltage for Minimizing Heat Dissipation Better Than 1% Voltage Regulation Accuracy With Preset Voltages AutoCompt Dynamic Compensation of Battery Pack's Internal Impedance to Reduce Charge Time Optional Cell-Temperature Monitoring Before and During Charge Integrated Voltage and Current Regulation With Programmable Charge-Current and Highor Low-Side Current Sensing Integrated Cell Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation During Initial Stage Of Charge Status Output for Single or Dual Led or Host Processor Interface Automatic Battery-Recharge Feature Charge Termination by Minimum Current Automatic Low-Power Sleep Mode When VCC Is Removed EVMs Available for Quick Evaluation Packaging: 8-Pin SOIC, 8-Pin TSSOP, 8-Pin MSOP

or bq2057xTS SOIC (SN) or TSSOP (TS) PACKAGE (TOP VIEW)
DESCRIPTION

The BENCHMARQ bq2057 series advanced Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Pol) linear charge-management ICs are designed for costsensitive and compact portable electronics. They combine high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication, and AutoComp charge-rate compensation in a single 8-pin IC. MSOP, TSSOP, and SOIC package options are offered to fit a wide range of end applications. The bq2057 continuously measures battery temperature using an external thermistor. For safety, the bq2057 inhibits charge until the battery temperature is within user-defined thresholds. The bq2057 then charges the battery in three phases: conditioning, constant current, and constant voltage. If the battery voltage is below the low-voltage threshold, V(min), the bq2057 precharges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external passelement during the initial stage of the charge. After conditioning, the bq2057 applies a constant current to the battery. An external sense-resistor sets the current. The sense-resistor can be on either the high or low side of the battery without additional components. The constant-current phase continues until the battery reaches the charge-regulation voltage.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. AutoComp is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

The bq2057 then begins the constant-voltage phase. The accuracy of the voltage regulation is better than 1% over the operating-temperature and supply-voltage ranges. For single and dual cells, the bq2057 is offered in four fixed-voltage versions: 8.2 V, and 8.4 V. Charge stops when the current tapers to the charge termination threshold, I(TERM). The bq2057 automatically restarts the charge if the battery voltage falls below the V(RCH) threshold. The designer also may use the AutoComp feature to reduce charging time. This proprietary technique allows safe and dynamic compensation for the internal impedance of the battery pack during charge.

AVAILABLE OPTIONS PACKAGE TA CHARGE REGULATION VOLTAGE 8.4 V Note the difference in pinout for this package. SOIC (SN) Not available bq2057CSN Not available bq2057WSN TSSOP (TS) bq2057TTS bq2057WTS Not available MSOP (DGK) bq2057DGK bq2057CDGK

TS1 Trip I-Control 0.5 VCC SNS VCCV(SNS) VSSV(SNS) + _ Charge Termination Current Regulation High/Low SNS Set


 

Related products with the same datasheet
BQ2057PN-C1
Some Part number from the same manufacture Texas Instruments, Inc.
BQ2057C
BQ2057CDGK ti BQ2057C, Li-ion Low-dropout Linear (4.2V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057CPN-C1
BQ2057CSN ti BQ2057C, Li-ion Low-dropout Linear (4.2V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057DGK ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057PN-C1 Advanced Li-ion Linear Charge Management ic
BQ2057SN ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057T
BQ2057TS ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TSN ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057TSTR ti BQ2057, Li-ion Low-dropout Linear (4.1V) Charge Management ic For One-cell Applications With Autocomptm
BQ2057TTS ti BQ2057T, Li-ion Low-dropout Linear (8.2V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2057W
BQ2057WSN ti BQ2057W, Li-ion Low-dropout Linear (8.4V) Charge Management ic For Two-cell Applications With Autocomptm
BQ2058 Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058CSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058D Lithium Ion Pack Supervisor For 3- And 4-cell Packs
BQ2058DSN-C5 ti BQ2058, 3-, 4-Cell Lithium-ion Pack Supervisor ic
BQ2058F Lithium Ion Pack Supervisor For 3- And 4-cell Packs
bQ2058FSN
BQ2058J

OPA4137UA/2K5 : ti OPA4137, Low Cost Fet-input Operational Amplifiers

PT4147A : Plug-in Power Solutions->Isolated->Single Output ti PT4147, 1.8Vout 5Amp 24V-Input ISOlated DC-DC Converter

SN54ABT162823AWD : 18-bit Bus-interface Flip-flops With 3-state Outputs

UC1854BL : Power Enhanced High Power Factor Preregulator

5962-9561314HYX : Precision Programmable Reference

TMS28F004AFB80BDCDL : 4194304-bit Synchronous Flash Memory

74ALVCH162374GRE4 : Logic - Latch Integrated Circuit (ics) D-Type Transparent Latch Tape & Reel (TR) 12mA, 12mA 1.65 V ~ 3.6 V; IC 16BIT D-TYPE LATCH 56BGA Specifications: Logic Type: D-Type Transparent Latch ; Independent Circuits: 2 ; Circuit: 8 8 ; Output Type: Tri-State ; Current - Output High, Low: 12mA, 12mA ; Mounting Type: Surface Mount ; Package / Case: 56-VFBGA ; Packaging: Tape & Reel (TR) ; Operating Temperature: -40C ~ 85C ; Delay Ti

74AUC2G126DCTRE4 : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tape & Reel (TR) 9mA, 9mA 0.8 V ~ 2.7 V; IC BUS BUFF TRI-ST DL N-INV SM8 Specifications: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: 8-LSSOP (0.11", 2.80mm Width) ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Bits per Element: 1 ; Number of Elements: 2 ; Operating Temperature: -40C ~ 85C ; Voltage - Supply: 0.8 V ~ 2.7

TRS211CDBG4 : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Line Transceiver Tube 4.5 V ~ 5.5 V; IC DVR/RCVR RS232 ESD 28SSOP Specifications: Number of Drivers/Receivers: 4/5 ; Type: Line Transceiver ; Voltage - Supply: 4.5 V ~ 5.5 V ; Package / Case: 28-SSOP (0.209", 5.30mm Width) ; Packaging: Tube ; Protocol: RS232 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

AIC1573 : 5-bit DAC, Synchronous PWM Power Regulator With Simple PWM Power Regulator, LDO And Linear Controller.

ESDA14V2-4BF : ESD Suppression. Quad Bidirectional Transil Array For Esd Protection. APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : Computers Printers Communication systems and cellular phones Video equipment This device is particularly adapted to the protection of symmetrical signals. The is a monolithic array designed to protect to 4 lines in a bidirectional way against ESD transients.

FM1601-7R : 50 Watt DC-DC Converters. Wide input voltage from or 3 isolated outputs kV AC I/O electric strength test voltage Rugged electrical and mechanical design Outputs individually controlled with excellent dynamic properties Operating ambient temperature range 4071 C Output 1 Output 2 Uo nom Io nom Uo nom Io nom [V DC] [A] [V DC] [A] Output 1 Output 2 Uo nom Io nom Uo nom Io nom [V DC] [A] [V DC] [A] Output.

IP7912 : 1.5 Amp Negative Voltage Regulator. OUTPUT VOLTAGES / V LINE REGULATION / A LOAD REGULATION THERMAL OVERLOAD PROTECTION OUTPUT TRANSISTOR SOA PROTECTION 1% VOLTAGE TOLERANCE OPTION (A VERSIONS) The / IP7900 series of 3 terminal regulators is available with several fixed output voltage making them useful in a wide range of applications. The A suffix devices provide / V line regulation,.

LT1246 : PWM and Off-Line Power Supply. LT1246, 1MHz Off-line Current Mode PWM And DC/DC Converter.

LX5202CDWP : SCSI - Single Ended. Scsi - Single Ended, Package : Sowb_power. The is an eighteen-line active terminator for the SCSI parallel bus. This SCSI standard recommends active termination at both ends of the SCSI bus. During disconnect mode, the LX5202 requires a meager 60A of supply current while offering only 6pF of output capacitance. To enter this low-power mode, the disconnect pin can be left open (floating) or driven.

MAX6712_EXS-T : 4-pin Sc70 Microprocessor Reset Circuits With Manual Reset Input. 4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input The MAX6711/MAX6712/MAX6713 are microprocessor (P) supervisory circuits used to monitor the power supplies in P and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with or +2.5V-powered circuits. They.

MGH : . to +125C operation to 50 VDC input Fully Isolated Magnetic feedback Fixed frequency 370 kHz typical Topology Current Mode Flyback 80 V for 120 ms transient protection (70 V for 15 V single and dual models) Inhibit function Indefinite short circuit protection to 79% efficiency Size (max.): x 0.250 inches x 6.35 mm) Shown with "Gull Wing" lead option,.

PIC645-1 : Power Integrated Circuit.

PT4662 : . Dual Outputs (Independantly Regulated) Power-up/Down Sequencing Input Voltage Range: 75V 1500 VDC Isolation Temp Range: to 100C High Efficiency: 88% Fixed Frequency Operation Over-Current Protection (Both Outputs) Dual Logic On/Off Control Over-Temperature Shutdown Over-Voltage Protection (Coordinated Shutdown) Under-Voltage Lockout Input Differential.

PT6503A : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT6503, 2.5Vout 8A 5V-Input Adjustable Isr With Short-circuit Protection.

UCC2884 : Frequency Foldback Current Mode PWM Controller. Frequency Foldback Reduces Operating Frequency Under Fault Conditions Accurate Programmable Volt-Second Clamp Programmable Maximum Duty Cycle Clamp Oscillator Synchronization Overcurrent Protection Shutdown with Full Soft Start Wide Gain Bandwidth Amplifier (GBW > 2.5MHz) Current Mode Operation Precision 5V Reference The is a high performance current.

TPS65056 : The TPS6505x are integrated Power Management ICs for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS6505x provides two efficient, 2.25-MHz step-down converters targeted at providing the core voltage and I/O voltage in a processor based system. Both step-down converters enter a low power mode at light.

CAT4008 : 8-Channel Constant Current LED Driver The CAT4008 is an 8 channel constant current driver for LED billboard and other general display applications. LED channel currents are programmed together via an external RSET resistor. Low output voltage operation on the LED channels as low as 0.4V (for 2 to 100mA LED current) allows for more power efficient designs.

NCP1251 : TSOP-6 Current-Mode PWM Controller For Off-line Power Supplies The NCP1250 is a highly integrated PWM controller capable of delivering a rugged and high performance offline power supply in a tiny TSOP-6 package. With a supply range up to 28 V, the controller hosts a jittered 65 kHz or 100 kHz switching circuitry operated in peak current mode control.

 
0-C     D-L     M-R     S-Z