Details, datasheet, quote on part number: TDA7535
PartTDA7535
CategoryData Conversion => DAC (Digital to Analog Converters) => >14 bit => 20 bit
DescriptionD/A Converters
Delta/sigma cascade 20 bit stereo DAC
CompanyST Microelectronics, Inc.
DatasheetDownload TDA7535 datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

20-bit resolution single ended output Analog reconstruction third order Chebyshev filter I2S input data format On chip PLL System clock: Fs 2 output channels 0.9 VRMS single ended output dynamic 3.3 V power supply Reset Sampling rate 36 kHz to 48 kHz

Description

The is a stereo, digital-to-analog converter designed for audio application, including digital interpolation filter, a third order multi-bit Delta-Sigma DAC, a third order Chebyshev's reconstruction filter and a differential to single ended output converter. This device is fabricated in highly advanced CMOS, where high speed precision analog circuits are combined with high density logic circuits. The TDA7535, according to standard audio converters, can accept any I2S data format. Table 1. Device summary

Order code TDA7535 TDA7535013TR Package SO14 Packing Tube Tape and reel

The TDA7535 is available in SO14 package. The total power consumption is less than 75 mW. TDA7535 is suitable for a wide variety of applications where high performance are required. Its low cost and single 3.3 V power supply make it ideal for several applications, such as CD players, MPEG audio, MIDI applications, CD-ROM drives, CD-Interactive, digital radio applications and so on. An evaluation board is available to perform measurement and to make listening tests.

Absolute maximum ratings. 4 Thermal data. 4 Recommended DC operating conditions. 4 Power consumption. 5 General interface electrical characteristics. 5 Low voltage CMOS interface DC electrical characteristics. 5 DAC electrical characteristics. 6

I2S interface. 7 Application circuit. 9 Package information. 10 Revision history. 11
N.C. SDATA SCK N.C. GND_DIG GND_ANA OUTSR
RESETN FSYNC VDD_DIG N.C. VDD_ANA VCM OUTSL

Pin name N.C. SDATA SCK N.C. GND_DIG GND_ANA OUTSR OUTSL VCM VDD_ANA N.C. VDD_DIG FSYNC RESETN Input/output power I2S digital data input I2S clock input Digital ground Analog ground Right channel single ended output Left channel single ended output Reference 1.65 V externally filtered Analog 3.3 V supply Digital 3.3 V-supply I2S Left-right channel selector Reset (active low) Description


 

Some Part number from the same manufacture ST Microelectronics, Inc.
STLS2F02-LP MicroprocessorsLoongson 2F high performance 64-bit superscalar MIPS® microprocessor
CPL-WB-01C2 EMI Filtering & Signal ConditioningWide band directional coupler with ISO port
EVAL5985 Power Management Ics2 A step-down switching regulator demonstration board based on the L5985
DB-499D-470 RF PowerDatasheet RF power amplifier using 1 x START499D NPN RF silicon transistor
DB-55008L-318 RF PowerRF power amplifier using 1 x PD55008L-E N-channel enhancement-mode lateral MOSFETs
STP16CPC05 LED Driver (Power Logic)Low voltage 16-bit constant current LED sink driver
STP16CPP05
L5988D Step - Down DC-DC Conversion4 A continuous (more than 5 A pulsed) step-down switching regulator with synchronous rectification
SPMB250-A1 Wireless Sensor ModulesMOTIONBEE\" family acceleration sensor
STGF100N30 90 A - 330 V - Fast IGBT90 A - 330 V - fast IGBT
STGP100N30
STGW100N30
STGF14N60D 14 A - 600 V - Short Circuit Rugged IGBT14 A - 600 V - short circuit rugged IGBT
STD12N65M5 Power MOSFETsN-channel 650 V, 0.370 ? 8.5 A MDmesh™ V Power MOSFET DPAK, TO-220FP, TO-220, IPAK
STF13NM60N Power MOSFETsN-channel 600 V, 0.28 ?, 11 A MDmesh™ II Power MOSFET DPAK, TO-220FP, TO-220
STD95N4LF3 Power MOSFETsDatasheet N-channel 40 V, 5.0 m?, 80 A DPAK STripFET™ Power MOSFET
STX690A Transistors, Power BipolarHigh performance low voltage NPN transistor
STA335BWSQS Sound Terminal2.1-channel, high-efficiency digital audio system with QSound QHD®
VND7N04 Low Side Switches\"OMNIFET\": Fully autoprotected power MOSFET
STPS20M100S Power SchottkyPower Schottky rectifier
STPS20SM100S Power SchottkyPower Schottky rectifiere

ACS4025 : AC Switchers Quad ac Line Switch Array

BTA10GP : -

HCF40181BM1 : HCF->CMOS 4000B Series 4-BIT Arithmetic Logic Unit

ST72561R6 :

STPS20100 : Power Schottky Diodes->100 and 150V Power Schottky High Voltage Power Schottky Rectifier

M29F002BT90N1 : 2 Mbit 256kb x8, Boot Block Single Supply Flash Memory

SRI4K-W41GE : 13.56 MHz Short-range Contactless Memory chip with 4096-bit Eeprom and Anticollision Functions

NAND01GR3M5AZC5F : 256/512mb/1gb (x8/x16, 1.8/3v, 528 Byte Page) NAND Flash Memories + 256/512mb (x16/x32, 1.8v) Lpsdram, MCP

STM32F100R6H6B : STM32 - 32-bit ARM Cortex MCUs Datasheet Low & medium-density value line, advanced ARM-based 32-bit MCU with 16 to 128 KB Flash, 12 timers, ADC, DAC & 8 comm interfaces

ST2L05R2833PT : DUAL OUTPUT, FIXED POSITIVE REGULATOR, PSSO4 Specifications: Regulator Type: Standard ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, PPAK-5 ; Life Cycle Stage: ACTIVE ; Output Voltage: 2.42 to 2.58 volts ; IOUT: 1 amps ; VIN: 4.5 to 7 volts

SPWF01SA.21 : WiFi / 802.11 Modules STMicroelectronics Intelligent Wi-Fi modules represent a plug and play, standalone 802.11 b/g/n solution for easy integration of wireless Internet connectivity features into existing or new products. Configured around a single-chip 802.11 transceiver with integrated PA and an STM32 32-bit microco

Same catergory

AD7885ABP : Lc2mos 16-bit, High Speed Sampling ADCs. Monolithic Construction Fast Conversion: 5.3 s High Throughput: 166 kSPS Low Power: 250 mW APPLICATIONS Automatic Test Equipment Medical Instrumentation Industrial Control Data Acquisition Systems Robotics SW1 A1 AGNDS AGNDF AVDD AVSS V DD VSS 4k V REF­ SW3 16-BIT ACCURATE DAC 9 CS TIMER CONTROL RD 9 The a 16-bit monolithic analog-to-digital converter.

ADS1201 : . 130dB DYNAMIC RANGE FULLY DIFFERENTIAL INPUT TWO-WIRE INTERFACE INTERNAL/EXTERNAL REFERENCE ON-CHIP SWITCHES FOR CALIBRATION The is a precision, 130dB dynamic range, delta-sigma modulator operating from a single +5V supply. The differential inputs are ideal for direct connection to transducers or low level signals. With the appropriate digital filter.

ADS1213 : . q DELTA-SIGMA A/D CONVERTER q 22 BITS NO MISSING CODES q 20 BITS EFFECTIVE RESOLUTION AT 10Hz AND 16 BITS 1000Hz q LOW POWER: 1.4mW q DIFFERENTIAL INPUTS q PROGRAMMABLE GAIN AMPLIFIER q SPI COMPATIBLE SSI INTERFACE q PROGRAMMABLE CUTOFF FREQUENCY 6.25kHz q INTERNAL/EXTERNAL REFERENCE q ON-CHIP SELF-CALIBRATION q ADS1213 INCLUDES 4-CHANNEL MUX The ADS1212.

ADS1253E : ti ADS1253, 24-Bit, 20kHz, Low Power Analog-to-digital Converter. q 24 BITS--NO MISSING CODES q 19 BITS EFFECTIVE RESOLUTION TO 20kHz DATA RATE q LOW NOISE: 1.8ppm q FOUR DIFFERENTIAL INPUTS q INL: 15ppm (max) q EXTERNAL REFERENCE 5V) q POWER-DOWN MODE q SYNC MODE q LOW POWER: at 10kHz The is a precision, wide dynamic range, deltasigma, Analog-to-Digital (A/D) converter with 24-bit resolution operating from a single.

ADS1286P : ti ADS1286, 12-Bit Micro Power Sampling Analog-to-digital Converter. SERIAL INTERFACE GUARANTEED NO MISSING CODES 20kHz SAMPLING RATE LOW SUPPLY CURRENT: 250µA The 12-bit, 20kHz analog-to-digital converter with a differential input and sample and hold amplifier and consumes only 250µA of supply current. The ADS1286 offers an SPI and SSI compatible serial interface for communications over a two or three wire interface.

ADS7808P : ti ADS7808, 12-Bit 10us Serial CMOS Sampling Analog-to-digital Converter.

ADS7824P : ti ADS7824, 4-Channel, 12-Bit Sampling CMOS A/D Converter. q 25µs max SAMPLING AND CONVERSION q SINGLE +5V SUPPLY OPERATION q PIN-COMPATIBLE WITH ADS7825 q PARALLEL AND SERIAL DATA OUTPUT 28-PIN 0.3" PLASTIC DIP AND SOIC q ±0.5 LSB max INL AND DNL q 50mW max POWER DISSIPATION q 50µW POWER DOWN MODE q ±10V INPUT RANGE, FOUR CHANNEL MULTIPLEXER q CONTINUOUS CONVERSION MODE The ADS7824 can acquire and convert.

DAC1221 : . For most current data sheet and other product information, visit www.burr-brown.com q 16-BIT MONOTONICITY GUARANTEED OVER +85°C q LOW POWER: 1.2mW q VOLTAGE OUTPUT q SETTLING TIME: 0.012% q MAX LINEARITY ERROR: 30ppm q ON-CHIP CALIBRATION APPLICATIONS q PROCESS CONTROL q ATE PIN ELECTRONICS q CLOSED-LOOP SERVO-CONTROL q SMART TRANSMITTERS q PORTABLE.

HT82V731 : Audio D/A Converter. Wide supply voltage range: 2.4V~5.5V CMOS technology Low power consumption Two voltage output channel in the same chip 16-bit dynamic range Low total harmonic distortion Data in 2˘s complement format, TTL 8-pin SOP package Applications CD ROM/VCD MP3/PDA/Smartphone Digital portable audio equipment Satellite/cable STB Motherboard/MPEG card a 16-bit digital-to-analog.

MAX182 : Calibrated, 4-Channel, 12-Bit ADC With Track/hold And Reference.

nAD1220-18 : Analog to Digital Converter ip. 1.8V power supply SNR typ 65dB for (fin = 10MHz) Low power @ 1.8V and 20MSPS) Compact area (1.2mm2) Frequency dependent biasing Differential input Low input capacitance Three power saving idle modes APPLICATIONS Imaging Wireless communication WLAN/IEEE 802.11x DVB receivers Powerline communication Video products The is a compact, high-speed, low power.

TLC320AD58CDW : Audio A to D Converters. ti TLC320AD58, 18-Bit Stereo Analog-to-digital Converter.

TLC3541 : . 5-V, LOW POWER, 14-BIT, 200-KSPS SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH AUTO-POWER DOWN D 200-KSPS Sampling Rate D Built-In Conversion Clock D INL: ±1 LSB Max APPLICATIONS D ATE System D Industrial Process Control D Measurement D Motor Control The TLC3541 and TLC3545 are a family of high performance, 14-bit, low power, miniature CMOS analog-to-digital.

LTC2483 : 16-Bit ADC with Easy Drive Input Current Cancellation and I2C Interface The LTC®2483 combines a 16-bit plus sign No Latency ΔΣTM analog-to-digital converter with patented Easy DriveTM technology and I2C digital interface. The patented sampling scheme eliminates dynamic input current errors and the shortcomings of on-chip buffering through.

DAC8822 : The DAC8822 dual, multiplying digital-to-analog converter (DAC) is designed to operate from a single 2.7V to 5.5V supply. The applied external reference input voltage VREF determines the full-scale output current. An internal feedback resistor (RFB) provides temperature tracking for the full-scale output when combined with an external, current-to-voltage.

 
0-C     D-L     M-R     S-Z