Details, datasheet, quote on part number: SP6213EC4-3.3
DescriptionSC-70 100mA CMOS LDO Regulator
CompanySipex Corporation
DatasheetDownload SP6213EC4-3.3 datasheet


Features, Applications


Digital Cordless Phones Cellular Phones PDAs Digital Still Cameras MP3 Players Battery-Powered Equipment Medical Devices


Tiny SC-70 Package Industry Standard 3 Pin and 5 Pin Options Thermally Enhanced 4 Pin SC-70 Option Guaranteed 100 mA Output Fixed Outputs: 5V 2.5% Output Voltage Accuracy Low Dropout Voltage, at 100mA Low Quiescent Current, 65 A Low Ground Current, 100 mA Short-Circuit Current Limit Thermal Shutdown Good Load and Line Regulation Fast Transient Response: TON/TOFF=80s Low Temperature Coefficient Stable with No Load using 0.47 F and 1F Ceramic 100mA Replacement for 80mA MIC5213


The a 100mA CMOS linear voltage regulator offered an SC-70 package that reduces board space requirements by 50% over a SOT-23 package. The SP6213 features low dropout voltage at 100mA low ground current (135A at full load) and low, 65A quiescent current. Designed specifically for hand-held, battery powered devices, the device includes an enable/shutdown pin. Regulator ground current increases only slightly in dropout to extend battery life. The SP6213 is offered in industry standard 3-pin and 5-pin SC-70 packages and a thermally enhanced SP6213 is available 3.0V, 3.3V and 5.0V fixed output voltages.

Rev. SP6213 100mA CMOS LDO Regulator Copyright 2002 Sipex Corporation

These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Supply Input Voltage to 8V Output Voltage (VOUT)...............................-0.6 to (VIN +1V) Enable Input Voltage to 11V Power Dissipation (PD)............Internally Limited, Note 3 Lead Temperature (soldering 5s)..........................260C Storage to +150C

Input Voltage to +7V Enable Input Voltage to 10V Junction Temperature to +125C Thermal Resistance, SC-70-3 (JA)................450C/W

VIN = VOUT = 100A, CIN = 1F, COUT 25C , bold values indicate TJ 125C unless otherwise noted.

Output Voltage Accuracy, (VOUT) Output Voltage Temperature Coefficient, Note 4, (VOUT/T) Line Regulation, (VOUT/ VIN) Load Regulation, Note 5, (VOUT) Dropout Voltage, Note 6, (VIN VOUT)

Quiescent Current, (IGND) Ground Pin Current, Note 7, (IGND)

Power Supply Rejection Ratio, (PSRR) Current Limit, (ICL) Thermal Limit Thermal Regulation, (VOUT/PD) Output Noise (eNO)

VIN = VOUT = 100A, CIN = 1.0F, COUT 25C , bold values indicate TJ 125C unless otherwise noted.

ENABLE INPUT Enable Input Logic-Low Voltage, (VIL) Enable Input Logic-High Voltage, (VIH) Enable Input Current, (IIL), (IIH) Regulator Shutdown Regulator Enabled VIL < 0.4V VIH > 2.0V Turn on Time (TON) Turn off Time (TOFN) A s

Exceeding the absolute maximum rating may damage the device. The device is not guaranteed to function outside its operating rating. The maximum allowable power dissipation at any TA (ambient temperature) is PD (MAX) = (TJ (MAX) TA) / qJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. The JA of the is 450C/W mounted a PC board with minimum copper area (see "Thermal Considerations" section for further details). Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. Load Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum of the load current plus the ground pin current. Thermal regulation is defined as the change in output voltage at a time "t" after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 100mA load pulse at VIN = 7V for = 10ms. Devices are ESD sensitive. Handling precautions are recommended.


Related products with the same datasheet
Some Part number from the same manufacture Sipex Corporation
SP6213EC4-5.0 SC-70 100mA CMOS LDO Regulator
SP6213EC5-1.8 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 65µA ;; Acc = 2.50% ;; Vdrop = 250mV
SP6231 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6231EN-3.3 500mA 3.3V Linear Regulator With Auxiliary Backup
SP6231ER-3.3 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6242EU Single Alkaline Cell,highefficiency Step-up DC-DC Converter
SP6641A Iout = 90mA ;; Vin Min. = 0.9V ;; Vin Max. = 4.5V ;; Fixed Outputs = 3.3V, 5.0V ;; Output Range = 3.3V ;; Iq = 10µA ;; Efficiency = 87% ;; Package = 5 Pin SOT-23
SP6642 Single Alkaline Cell High Efficiency Step-up DC-DC Converter
SP6644 Iout = 190mA ;; Vin Min. = 0.85V ;; Vin Max. = 3.3V ;; Fixed Outputs = 1.3V, 2.6V ;; Output Range = Adj; 3.3V ;; Iq = 50µA ;; Efficiency = 92% ;; Package = 8 Pin Msoic
SP6648 Iout = 400mA ;; Vin Min. = 0.7V ;; Vin Max. = 4.5V ;; Fixed Outputs = 3.3V ;; Output Range = Adj; 3.3V ;; Iq = 13µA ;; Efficiency = 94% ;; Package = 10 Pin Msop
SP6650 Iout = 600mA ;; Min. = 2.6V ;; Max. = 6.5V ;; Iq = 70µA ;; Fixed Outputs = 3.3V ;; Output Range = Adj; 3.3V ;; Freq. (kHz) = PFM ;; Efficiency = 95% ;; Package = 10 Pin Msop
SP6651A Iout = 800mA ;; Min. = 2.7V ;; Max. = 5.5V ;; Iq = 20µA ;; Fixed Outputs = N/a ;; Output Range = Adj ;; Freq. (kHz) = PFM ;; Efficiency = 98% ;; Package = 10 Pin Msop

AS1115T-5-0 :

SP2526-1EN : System Power->USB Power Switch iq = 80µA ;; Vin Min. = 3V ;; Vin Max. = 6V ;; Iout = Yes ;; Enable (V) = X ;; Package = 8 Pin Nsoic

SP3243EBCA : Transceivers No. Of TX = 2 ;; No. Of RX = 2 ;; Data Rate (kbps) = 250 ;; Supply Voltage (V) = 3.0 - 5.5 ;; Typ. Icc Current (mA) = 0.3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (F) = 0.10 ;; = • ;; = • ;; = • ;; Features = › RS232 Compatible Down to Vcc=2.7V

SP9501AS : 12-bit, Voltage Output D/A Converter

SPX1121S-2.5 : 150mA Low Dropout Voltage Regulator

SPX2700AU3-5.0 : 700ma Low Dropout Voltage Regulators With Shutdown

SPX2954AU5-5.0 : 250 ma Low Drop Out Voltage Regulator

SP78L05N-L/TR : 100mA 3-Terminal Positive Voltage Regulator Features * Output Current up to 100 mA * Fixed Output Voltage of 5V * Output Voltage Tolerances of +/- 5% over the Full Temperature Range * Internal Short Circuit Current-Limiting * Internal Thermal Overload Protection * No

SPX29150T-3.3/TR : 1.5A Low Dropout Voltage Regulator

SP6205EM5-3-0 : Low Noise, 300ma and 500ma CMOS LDO Regulators

SPX1117M3-3-3/TR : 800ma Low Dropout Voltage Regulator

SPX3819S-1.8/TR : 500ma, Low-noise LDO Voltage Regulator

0-C     D-L     M-R     S-Z