Details, datasheet, quote on part number: SP6201EM5ADJ
PartSP6201EM5ADJ
Category
DescriptionMicropower 100mA And 200mA CMOS LDO Regulators
CompanySipex Corporation
DatasheetDownload SP6201EM5ADJ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES s Low Dropout Voltage, 100mA s High Output Voltage Accuracy, 2% s Guaranteed 200mA Output, SP6201 s Ultra Low Shutdown Current, 1A Max s Ultra Low GND Current @ 200mA Load @ 100A Load s Fast Transient Response s 78dB PSRR s 40dB PSRR 400kHz s Extremely Tight Load and Line Regulation s Very Low Temperature Coefficient s Current and Thermal Limiting s RESET Output (VOUT good) s Logic-Controlled Electronic Enable s Unconditionally stable with 1F Ceramic s 5 Pin SOT-23 Package s Fixed Outputs 5V s Adjustable Output Available

DESCRIPTION
APPLICATIONS

s Cellular Telephones s Laptop, Notebooks and Palmtop Computers s Battery-Powered Equipment s Consumer/ Personal Electronics s SMPS Post-Regulator s DC-to-DC Modules s Medical Devices s Data Cable s Pagers

The SP6200 and SP6201 are CMOS LDOs designed to meet a broad range of applications that require accuracy, speed and ease of use. These LDOs offer extremely low quiescent current which only increases slightly under load, thus providing advantages in ground current performance over bipolar LDOs. The LDOs handle an extremely wide load range and guarantee stability with a 1F ceramic output capacitor. They have excellent low frequency PSRR, not found in other CMOS LDOs and thus offer exceptional Line Regulation. High frequency PSRR is better than to 400kHz. Load Regulation is excellent and temperature stability is comparable to bipolar LDOs. An enable feature is provided on all versions. The SP6200/6201 is available in fixed and adjustable output voltage versions in a small SOT-235 package. A VOUT good indicator is provided on all fixed output versions.

These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Supply Input Voltage to 8V Output Voltage (VOUT)...............................-0.6 to (VIN +1V) Enable Input Voltage to 11V Power Dissipation (PD)............Internally Limited, Note 3 Lead Temperature (soldering 5s)..........................260C Storage to +150C

Input Voltage to +7V Enable Input Voltage to 10V Junction Temperature to +125C Thermal Resistance, SOT-23-5 (JA)................Note 3

SPECIFICATIONS
VIN = VOUT = 100A, CIN = 1.0F, COUT 25C , bold values indicate TJ 125C unless otherwise noted.

PARAMETER Output Voltage Accuracy, (VO) Reference Voltage Output Voltage Temperature Coefficient, Note 4, (VO/T) Line Regulation, (VO/ VO) Load Regulation, Note 5, (VO/ VO) Dropout Voltage, Note 6, (VIN VO)

CONDITIONS Variation from specified VOUT Adjustable version only
Quiescent Current, (IGND) Ground Pin Current, Note 7, (IGND)
Power Supply Rejection Ratio, (PSRR) Current Limit, (ICL) Thermal Limit
Frequency = 10mA Frequency SP6200 SP6201 Regulator Turns Off Regulator Turns On
VIN = VOUT = 100A, CIN = 1.0F, COUT 25C , bold values indicate TJ 125C unless otherwise noted.
PARAMETER Thermal Regulation, Note 8, (VO/PD) Output Noise, (e no)

ENABLE INPUT Enable Input Logic-Low Voltage, (VIL) Enable Input Logic-High Voltage, (VIH) Enable Input Current, (IIL), (IIH) Regulator Shutdown Regulator Enabled VIL < 0.4V VIH > 2.0V Reset Not Output Threshold A %

Note 1. Exceeding the absolute maximum rating may damage the device. Note 2. The device is not guaranteed to function outside its operating rating. Note 3. The maximum allowable power dissipation at any TA (ambient temperature) is PD (MAX) = (TJ (MAX) TA) / JA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. The JA of the SP6200/6201 (all versions) is 220C/W mounted a PC board with minimum copper area (see "Thermal Considerations" section for further details). Note 4. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. Note 5. Load Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range; from 100mA, SP6200; from 200mA, SP6201. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Note 6. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Note 7. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum of the load current plus the ground pin current. Note 8. Thermal regulation is defined as the change in output voltage at a time "t" after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 100mA load pulse at VIN = 7V for = 10ms.


 

Related products with the same datasheet
SP6201EM5-5.0/TR
SP6201EM5ADJ/TR
Some Part number from the same manufacture Sipex Corporation
SP6201EM5ADJ/TR Micropower 100mA And 200mA CMOS LDO Regulators
SP6203 Iout = 300mA ;; Vin Min. = 2.7V ;; Vin Max. = 6V ;; Iq = 45µA ;; Acc = 2% ;; Vdrop = 180mV
SP6213 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 65µA ;; Acc = 2.50% ;; Vdrop = 250mV
SP6213EC3-2.5 SC-70 100mA CMOS LDO Regulator
SP6213EC5-1.8 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 65µA ;; Acc = 2.50% ;; Vdrop = 250mV
SP6231 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6231EN-3.3 500mA 3.3V Linear Regulator With Auxiliary Backup
SP6231EN-3.3/TR
SP6231ER-3.3 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6242EU Single Alkaline Cell,highefficiency Step-up DC-DC Converter
SP6243EU
SP6639
SP6639CN
SP6639CP
SP6640
SP6640CN
SP6640CP
SP6641A Iout = 90mA ;; Vin Min. = 0.9V ;; Vin Max. = 4.5V ;; Fixed Outputs = 3.3V, 5.0V ;; Output Range = 3.3V ;; Iq = 10µA ;; Efficiency = 87% ;; Package = 5 Pin SOT-23
SP6642 Single Alkaline Cell High Efficiency Step-up DC-DC Converter
SP6644 Iout = 190mA ;; Vin Min. = 0.85V ;; Vin Max. = 3.3V ;; Fixed Outputs = 1.3V, 2.6V ;; Output Range = Adj; 3.3V ;; Iq = 50µA ;; Efficiency = 92% ;; Package = 8 Pin Msoic
SP6648 Iout = 400mA ;; Vin Min. = 0.7V ;; Vin Max. = 4.5V ;; Fixed Outputs = 3.3V ;; Output Range = Adj; 3.3V ;; Iq = 13µA ;; Efficiency = 94% ;; Package = 10 Pin Msop

SP207HBCA : Transceivers No. Of TX = 5 ;; No. Of RX = 3 ;; Data Rate (kbps) = 230 ;; Supply Voltage (V) = 5 ;; Typ. Icc Current (mA) = 3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (F) = 0.10 ;; = ;; = ;; = ;; Features = › Charge Pump Caps CAN Range From .1 to 10 µF ;; Package = 24-Pi

SP3281EBEY : Transceivers No. Of TX = 5 ;; No. Of RX = 3 ;; Data Rate (kbps) = 250 ;; Supply Voltage (V) = 2.35 -5.5 ;; Typ. Icc Current (mA) = 0.3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (F) = 0.10 ;; = • ;; = • ;; = • ;; Features = › RS232 Compatible Down to Vcc=2.7V

SP4438UEB : LEDs/Segment Display Drivers Ultra-quiet Electroluminescent Lamp Driver For Cellular Phone Applications

SP489ACP : no of Tx/rx = 4Rx ;; Duplex = N/a ;; VCC (V) = 5 ;; Typ. Icc Current (mA) = 1 ;; Data Rate (kbps) = 30,000 ;; Typ. Shut Down Icc (µA) = N/a ;; No. Of Rx/tx on Bus = N/a ;; RX Failsafe With Inputs Open = • ;; Features = › Independent Receiver Enable ;; Op. Range (°C) = -40 to 85

SPX2931M1-3.3 : Iout = 100mA ;; Vin Min. = 6V ;; Vin Max. = 26V ;; Iq = 400µA ;; Acc = 2%, 3% ;; Vdrop = 300mV

SP1086V2-L-2-5/TR : DescriptionThe SP1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 3A of load current. The series features on-chip thermal shutdown. It also includes a bandgap reference and a current limiting circuit. The SP1085 is available in 1.5V, 1.8V, 2.5V, 2.85V, 3.

SPX385S-1.2/TR : 5V Micropower Voltage Reference

SPX1202U-3-0/TR : 600ma Low Dropout Voltage Regulator

SP301ET : Rs-232/rs-422 Line Drivers/receivers

SP810EK-2-6/TR : 3 Pin Microprocessor Supervisor Circuit

SPX1117R-L-3-3 : 800ma Low Dropout Voltage Regulator

SPX3819M5-1-8/TR : 500ma, Low-noise LDO Voltage Regulator

 
0-C     D-L     M-R     S-Z