Details, datasheet, quote on part number: SP6200
PartSP6200
CategoryPower Management => Regulators => Linear Regulators => LDO (Low Drop Out)
DescriptionIout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 28µA ;; Acc = 2% ;; Vdrop = 160mV
CompanySipex Corporation
DatasheetDownload SP6200 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

Low Dropout Voltage: @ 100mA High Output Voltage Accuracy: 2% Guaranteed 200mA Output: SP6201 Ultra Low Shutdown Current: 1A Max Ultra Low GND Current @ 200mA Load @ 100A Load Fast Transient Response 78dB PSRR 100Hz 40dB PSRR @ 400kHz Extremely Tight Load and Line Regulation Very Low Temperature Coefficient Current and Thermal Limiting RESET Output (VOUT good) Logic-Controlled Electronic Enable Unconditionally Stable with 1F Ceramic 5 Pin SOT-23 Package Fixed Outputs 3.5V, 5V Adjustable Output Available

APPLICATIONS

Cellular Telephones Laptop, Notebooks and Palmtop Computers Battery-Powered Equipment Consumer/ Personal Electronics SMPS Post-Regulator DC-to-DC Modules Medical Devices Data Cable Pagers

DESCRIPTION

The SP6200 and SP6201 are CMOS LDOs designed to meet a broad range of applications that require accuracy, speed and ease of use. These LDOs offer extremely low quiescent current which only increases slightly under load, thus providing advantages in ground current performance over bipolar LDOs. The LDOs handle an extremely wide load range and guarantee stability with a 1F ceramic output capacitor. They have excellent low frequency PSRR, not found in other CMOS LDOs and thus offer exceptional Line Regulation. High frequency PSRR is better than to 400kHz. Load Regulation is excellent and temperature stability is comparable to bipolar LDOs. An enable feature is provided on all versions. The SP6200/6201 is available in fixed and adjustable output voltage versions in a small SOT-23-5 package. A VOUT good indicator is provided on all fixed output versions.

These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Supply Input Voltage (VIN)............................. to 7V Output Voltage (VOUT)......................... -0.6 to (VIN +1V) Enable Input Voltage (VEN)............................ to 7V Power Dissipation (PD).......... Internally Limited, Note 3 Lead Temperature (soldering 5s)....................... 260C Storage Temperature........................ to +150C

Input Voltage to +6V Enable Input Voltage to +6V Junction Temperature to +125C Thermal Resistance, SOT-23-5 (JA)................Note 3

VIN = VOUT = 5V for ADJ, = 100A, CIN = 1.0F, COUT 25C , unless otherwise specified. The denotes the specifications which apply over the full operating temperature range, unless otherwise specified.

PARAMETER Output Voltage Accuracy, (VO) Reference Voltage Output Voltage Temperature Coefficient, Note 4, (VO/T) Minimum Supply Voltage

CONDITIONS Variation from specified VOUT Adjustable version only

= 100mA VIN = (VOUT to 100mA, VIN to 100mA, VIN 200mA, SP6201 Only VEN 100mA, SP6200 only VEN 200mA, SP6201 Only Frequency IL =10mA Frequency SP6200 SP6201 Turns On Turns Off VEN 0.4V VEN = 100A

Line Regulation, (VO/ VIN) Load Regulation, Note 5, (VO / VO) SP6200-1.8V Load Regulation SP6200-1.5V Load Regulation Dropout Voltage, Note 6, (VIN VO)

Shutdown Quiescent Current, (IGND) Ground Pin Current, Note 7, (IGND)
Power Supply Rejection Ratio, (PSRR) Current Limit, (ICL) Thermal Limit 100 300

VIN = VOUT = 5V for ADJ, = 100A, CIN = 1.0F, COUT 25C , unless otherwise specified. The denotes the specifications which apply over the full operating temperature range, unless otherwise specified.

PARAMETER Thermal Regulation, Note 8, (VO/PD) Output Noise, (e no)

150 ENABLE INPUT Enable Input Logic-Low Voltage, (VIL) Enable Input Logic-High Voltage, (VIH) Enable Input Current, (IIL), (IIH) Reset Not Output

1F 0.1F from VOUT to Adj. to 100kHz Regulator Shutdown Regulator Enabled VIL < 0.4V VIH > 2.0V Threshold

Note 1. Exceeding the absolute maximum rating may damage the device. Note 2. The device is not guaranteed to function outside its operating rating. Note 3. The maximum allowable power dissipation at any TA (ambient temperature) is PD (MAX) = (TJ (MAX) TA) / A. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. The JA of the SP6200/6201 (all versions) is 220C/W mounted a PC board with minimum copper area (see "Thermal Considerations" section for further details). Note 4. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. Note 5. Load Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range; from 100mA, SP6200; from 200mA, SP6201. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Not applicable to output voltages less than 2.5V. Note 6. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Not applicable to output voltages less than 2.7V. Note 7. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum of the load current plus the ground pin current. Note 8. Thermal regulation is defined as the change in output voltage at a time "t" after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 100mA load pulse at VIN = 6V for = 10ms.


 

Related products with the same datasheet
SP6200-3.3
SP6200EM5-1.5
SP6200EM5-1.5/TR
SP6200EM5-1.8
SP6200EM5-1.8/TR
SP6200EM5-2.5
SP6200EM5-2.5/TR
SP6200EM5-2.7
SP6200EM5-2.7/TR
SP6200EM5-2.85
SP6200EM5-2.85/TR
SP6200EM5-3.0
Some Part number from the same manufacture Sipex Corporation
SP6200-3.3 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 28µA ;; Acc = 2% ;; Vdrop = 160mV
SP6201EM5-3.5/TR Micropower 100mA And 200mA CMOS LDO Regulators
SP6201EM5-5.0
SP6201EM5-5.0/TR
SP6201EM5-ADJ
SP6201EM5ADJ
SP6203 Iout = 300mA ;; Vin Min. = 2.7V ;; Vin Max. = 6V ;; Iq = 45µA ;; Acc = 2% ;; Vdrop = 180mV
SP6213 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 65µA ;; Acc = 2.50% ;; Vdrop = 250mV
SP6213EC3-2.5 SC-70 100mA CMOS LDO Regulator
SP6213EC5-1.8 Iout = 100mA ;; Vin Min. = 2.5V ;; Vin Max. = 7V ;; Iq = 65µA ;; Acc = 2.50% ;; Vdrop = 250mV
SP6231 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6231EN-3.3 500mA 3.3V Linear Regulator With Auxiliary Backup
SP6231EN-3.3/TR
SP6231ER-3.3 Iout = 500mA ;; Vin Min. = 0.3V ;; Vin Max. = 7V ;; Iq = 400µA ;; Acc = 3% ;; Vdrop = 300mV
SP6242EU Single Alkaline Cell,highefficiency Step-up DC-DC Converter
SP6243EU
SP6639
SP6639CN
SP6639CP
SP6640
SP6640CN

AS2950AS-3-0 :

AS8863M5-3-3 :

SP310ACX : Transceivers No. Of TX = 2 ;; No. Of RX = 2 ;; Data Rate (kbps) = 120 ;; Supply Voltage (V) = 5 ;; Typ. Icc Current (mA) = 10 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (F) = 0.10 ;; = ;; = ;; = ;; Features = › Charge Pump Caps CAN Range From .1 to 10 µF ;; Package = 16-P

SP3232EEA : Transceivers No. Of TX = 2 ;; No. Of RX = 2 ;; Data Rate (kbps) = 120 ;; Supply Voltage (V) = 3.0 - 5.5 ;; Typ. Icc Current (mA) = 0.3 ;; Int. Chrg. Pump = • ;; No. Of Ext. Caps = 4 ;; Nom Cap. Value (F) = 0.10 ;; = • ;; = • ;; = • ;; Features = › RS232 Compatible Down to Vcc=2.7V

SP6661EU/TR : iq = 3mA ;; Vin Min. = 1.5V ;; Vin Max. = 5.3V ;; Output Current = 200mA ;; Output Range = -1.2V to –5V ;; Freq. (kHz) = 900 ;; Efficiency = 92% ;; Package = 8 Pin Msoic 8 Pin Nsoic

SP774BK : 12-bit Sampling A/D Converters

SPX3940M3-5-0 : Iout = 1A ;; Vin Min. = 4.3V ;; Vin Max. = 16V ;; Iq = 12mA ;; Acc = 1%, 2% ;; Vdrop = 280mV

SP3282EBEY/TR : Intelligent +2.35v to +5.5v Rs-232 Transceivers

SP7686ER : Evaluation Board Manual

SP6687EB : 4 Channel Charge Pump White LED Driver

Same catergory

ADP3331 : High Accuracy, Ultra-low Quiescent Current LDO; SOT-23. Adjustable Output Ultralow IQ, 200 mA, SOT-23, anyCAPTM Low Dropout Regulator ADP3331 High Accuracy Over Line and Load: C, 1.4% Over Temperature Ultralow Dropout Voltage: 140 mV (Typ) 200 mA Can Be Used as a High Current (>1 A) LDO Controller Requires Only 0.47 F for Stability anyCAP = Stable with Any Type of Capacitor (Including MLCC) Current and Thermal.

HIP6019CB : Advanced Dual PWM And Dual Linear Power Control. Advanced Dual PWM and Dual Linear Power Control The HIP6019 provides the power control and protection for four output voltages in high-performance microprocessor and computer applications. The IC integrates two PWM controllers, a linear regulator and a linear controller as well as the monitoring and protection functions into a single 28 lead SOIC package.

IP117MAHVLCC4 : Screening Options Available = ;; Package = LCC4 ;; = Voltage Regulator ;; Temperature Range = -55 to +125 C ;; Polarity = Positive ;; Current (A) = 0.5A ;; Input Voltage (V) = 60V Differential ;; Output Voltage (V) = Variable ;; Voltage Drop (typ.) = - ;; Voltage Drop (max.) = -.

LT1786F : LT1786F, Smbus Programmable CCFL Switching Regulator. Grounded Lamp or Floating Lamp Configurations Precision 100A Full-Scale DAC Programming Current 2-Wire SMBus Interface DAC Setting Is Retained in Shutdown Wide Battery Input Range: to 30V Open Lamp Protection Two Selectable SMBus Addresses to-lamp-current control" and communicates using the 2-wire SMBus serial interface. The LT1786F acts as an SMBus.

LTC3714 : Step-Down. LTC3714, Intel Compatible, Wide Operating Range, Step-down Controller With Internal op Amp.

MAX1739EVKIT : MAX1739EVSYS, MAX1739EVKIT Evaluation System/evaluation Kit For The MAX1739.

MAX5058 : Parallelable, Secondary-side Synchronous Rectifier Driver And Feedback-generator Controller Ics The MAX5058/MAX5059 Enable Secondary-side Synchronous Rectification in ISOlated Power Supplies Using Widely Available Power MOSFETs. These Devices Facilitate The Commutation of The Secondary-side MOSFETs BY Providing a Clean Gate-drive Signal That is Synchronized.

MAX783 : Triple-output Power Supply Controller For Notebook Computers. Dual PWM Buck Controllers (+3.3V and +5V) Dual PCMCIA VPP Outputs (0V/3.3V/5V/12V) Two Precision Comparators or Level Translators Power-Ready Status Output (RDY5) 95% Efficiency Optimized for 6-Cell Applications 420A Quiescent Current; 70A in Standby (linear regulators alive) 25A Shutdown Current to 30V Input Range o Small SSOP Package o Fixed Output.

P14TG-2405E41M : Power/w = 3 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = 3,3/5/12/15/18Regulated ;; ISOlation = 1500V ;; Package = DIP24M.

PT78ST174H : Plug-in Power Solutions->Non-Isolated->Single Posi. ti PT78ST174, 7.15Vout 1.5Amp Wide-input Positive Step-down Isr.

SG1626J : Half Bridge Driver, Inverting. Half Bridge Driver, Inverting, Package : Dip.

SG3525A : Regulating Pulse Width Modulator.

TPS2836D : MOSFET and Power Drivers. ti TPS2836, Non-inverting Fast Synchronous Buck MOSFETs Driver With TTL Inputs.

LM20124 : 4A, 1MHz PowerWise Synchronous Buck Regulator The LM20124 is a full featured 1 MHz synchronous buck regulator capable of delivering up to 4A of continuous output current. The current mode control loop can be compensated to be stable with virtually any type of output capacitor. For most cases, compensating the device only requires two external components,.

TIW06-103 : Compact 6 & 12 Watt Power Supplies In IP67 Package The power supplies come in a dust and waterproof IP67 plastic housing, and are easy to connect via flying wires. With the compact design they fit into standard flush boxes for easy installation. The units can be operated in a temperature range of 25C up to 50C at full load an without forced cooling.

TPS826711 : 600mA Fully Integrated, Low Noise Step-Down Converter In MicroSiP(TM) Pac The TPS8267x device is a complete 600mA, DC/DC step-down power supply intended for low-power applications. Included in the package are the switching regulator, inductor and input/output capacitors. No additional components are required to finish the design. The TPS8267x is based.

 
0-C     D-L     M-R     S-Z