Details, datasheet, quote on part number: GP1FJ710CS
PartGP1FJ710CS
Category
Description
CompanySharp Microelectronics of the Americas
DatasheetDownload GP1FJ710CS datasheet
  

 

Features, Applications

Features 1 ) Optical fiber cable for digital audio interface type conversion cable 2.5 - Square type conversion cable 3 ) According to JIS C 6560 standard

Specifications

Parameter Fiber coupling output Refracting ratio distribution Tension ( Plug and optical fiber ) Tension ( Optical fiber ) Bend radius Insertion force / Withdrawal force Operating temperature

(Notice)In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.Specifications are subject to change without notice for improvement. (Internet)Data for Sharp's optoelectronic/power devices is provided on internet. (Address http://sharp-world.com/ecg/)

The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: - Personal computers - Office automation equipment - Telecommunication equipment [terminal] - Test and measurement equipment - Industrial control - Audio visual equipment - Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: - Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - Traffic signals - Gas leakage sensor breakers - Alarm equipment - Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - Space applications - Telecommunication equipment [trunk lines] - Nuclear power control equipment - Medical and other life support equipment (e.g., scuba).

If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication.


 

Related products with the same datasheet
GP1FJ810CS
Some Part number from the same manufacture Sharp Microelectronics of the Americas
GP1FJ810CS
GP1FM313RZ
GP1FM520RZ
GP1FM520RZ Pof Square Type Receiver
GP1FM520TZ
GP1FM520TZ Square Type Pof Transmitter
GP1FM521RZ Pof Square Type Receiver
GP1FM521TZ Pof Square Type Transmitter
GP1FP513RK Combojack Receiver
GP1FP513TK Combojack Transmitter
GP1H11A Replace The GP1H11A to : GP2W1001YP
GP1H11B Replace The GP1H11B to : GP2W1001YP
GP1H121 Replace The GP1H121 to : GP2W1001YP
GP1H20 Irda 115 Kbit/s, 1 Meter Transceiver
GP1L03 Wide Gap Type Photointerrupter
GP1L21 Subminiature, High Sensitivity Photointerrupter
GP1L22
GP1L27
GP1L50 High Sensitivity Photointerrupter
GP1L51
GP1L52V High Sensitivity Photointerrupter in a Case Type Package

GL0ZE802B0S : Visible LEDs Cylinder Type, Colorless Transparency Super-luminosity (Yellow-Green) Led Lamps For Outdoor Use.

PC-837 : High Density Mounting Type Photocoupler

PC904P : Photocoupler With a Built-in Voltage Detection Circuit

GP2S15 : Subminiature Photo Interrupter WITH LENS

LT260 : GaAs Hall IC for Noncontact Switch(alternating Magnetic Field-type)

GH30507T2A : Gh30507t2a

LH52B256TR-90LL : CMOS 256K (32K x 8) Static RAM

GM1BD76340A : LEDs -; LED 0.7WATT WHITE 2800K Specifications: Color: White, Warm ; Lens Style/Size: Round with Flat Top ; Millicandela Rating: 10000mcd ; Voltage - Forward (Vf) Typ: 14V ; Wavelength - Dominant: 2800K ; Wavelength - Peak: - ; Current - Test: 50mA ; Viewing Angle: - ; Lens Type: Clear ; Luminous Flux @ Current - Test: 29 lm ; Pac

PQ1AS10A0K : Pmic - Led Driver Integrated Circuit (ics) - - -; IC LED AC DRIVER 110V 3W Specifications: Type - Primary: - ; Type - Secondary: - ; Number of Outputs: - ; Constant Current: - ; Constant Voltage: - ; Topology: - ; Frequency: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

PC457L0YIT0F : Optoisolator - Transistor, Photovoltaic Output Channel Surface Mount 6-SOIC (0.173", 4.40mm Width) 5 Leads; PHOTOCOUPLER OPIC 5-SOP Specifications: Voltage - Isolation: 3750Vrms ; Input Type: DC ; Output Type: Transistor with Vcc ; Current - Output / Channel: 8mA ; Voltage - Output: 20V ; Vce Saturation (Max): - ; Current Transfer Ratio (Min): 15% @ 16mA ; Mounting Type: Surface Mount ; Package / Case: 6-SOIC (0.173", 4.40mm Wid

PR39MF21YIPF : TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX Specifications: Mounting: LEAD FREE, PLASTIC, SMT, DIP-8 ; Maximum Switching Current: 0.90 amps ; Isolation Voltage: 4 kilovolts ; Approvals: RoHS ; Operating Temp: -22 to 185 F (243 to 358 K)

Same catergory

74AC11478DW : D-Type Flip-Flops. ti 74AC11478, Octal Dual-rank D-type Flip-flops With 3-State Outputs.

MR211 : Accessories & Service. When selecting a measuring wheel the kind of material to be measured has to be taken into consideration prior to any decision on wheel surface respectively cover lining. The wheel circumference depends on the space available as well as on the size of counter or encoder. The smaller the measuring wheel, the more force required at the wheel circumference.

TC7.5A4V : Topstek Current Transducer. i Highly reliable Hall Effect device i Compact and light weight i Fast response time i Excellent linearity of the output voltage over a wide input range i Excellent frequency response 50 kHz) i Low power consumption (9 mA nominal) i Capable of measuring both DC and AC, both pulsed and mixed i High isolation voltage between the measuring circuit and the current-carrying.

H11F3M : Photo FET Optocouplers. As a remote variable resistor: 300M 99.9% linearity 15pF shunt capacitance 100G I/O isolation resistance As an analog switch: Extremely low offset voltage 60 Vpk-pk signal capability No charge injection or latch-up ton, toff 15S UL recognized (File #E90700) The H11FXM series consists of a Gallium-AluminumArsenide IRED emitting diode coupled to a symmetrical.

C317C223K5R5TA : 0.022F Ceramic Capacitor Radial 50V; CAP CER 0.022UF 50V 10% RADIAL. s: Capacitance: 0.022F ; Voltage - Rated: 50V ; Tolerance: 10% ; Package / Case: Radial ; Temperature Coefficient: X7R ; Packaging: Bulk ; : - ; Lead Spacing: 0.200" (5.08mm) ; Operating Temperature: -55C ~ 125C ; Mounting Type: Through Hole ; Lead Free Status: Lead Free ; RoHS.

HF2422-683Y0R4-T01 : 400mA Common Mode Choke Filter - Power Line; FILTER LINE 68MH 0.4A VERTICAL. s: Inductance: 68mH ; Impedance: - ; DC Resistance (DCR): 2.3 Ohm Max ; Current: 400mA ; Filter Type: Power Line ; Mounting Type: Through Hole ; Package / Case: Vertical, 4 PC Pin ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

744777122 : Fixed Inductors, Coils, Choke 22H 1.41A 0.287" L x 0.287" W x 0.177" H (7.30mm x 7.30mm x 4.50mm) Ferrite Core; INDUCTOR POWER 22UH 1.41A SMD. s: Inductance: 22H ; Tolerance: 20% ; Package / Case: 0.287" L x 0.287" W x 0.177" H (7.30mm x 7.30mm x 4.50mm) ; Packaging: Cut Tape (CT) ; Type: Ferrite Core ; Current: 1.41A ; Mounting Type: Surface Mount.

1P1G126QDBVRQ1 : Logic - Buffers, Drivers, Receivers, Transceiver Integrated Circuit (ics) Buffer/Line Driver, Non-Inverting Tape & Reel (TR) 24mA, 24mA 1.65 V ~ 5.5 V; IC BUS BUFF TRI-ST N-INV SOT235. s: Logic Type: Buffer/Line Driver, Non-Inverting ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Mounting Type: Surface Mount ; Number of Bits.

3-640433-7 : Tin Free Hanging (In-Line) Rectangular - Free Hanging, Panel Mount Connectors, Interconnect Receptacle; CONN RECEPT 7POS 22AWG MTA156. s: Color: Red ; Connector Type: Receptacle ; Contact Finish: Tin ; : Closed End ; Mounting Type: Free Hanging (In-Line) ; Number of Rows: 1 ; Pitch: 0.156" (3.96mm) ; Row Spacing: - ; Packaging: Bulk ; Fastening Type:.

RNF14BAE2K18 : 2.18K Ohm 0.25W, 1/4W Through Hole Resistors; RES 2.18K OHM 1/4W .1% AXIAL. s: Resistance (Ohms): 2.18K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Tape & Box (TB) ; Composition: Metal Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

MPM1001AT1 : Resistor 500 Ohm 100mW 2 Resistors[number of pins] Pin Networks, Arrays; RES NET 500 OHM 2 RES TO-236-3. s: Resistance (Ohms): 500 ; Tolerance: 0.1% ; Power Per Element: 100mW ; Circuit Type: Voltage Divider ; Number of Pins: 3 ; Packaging: Tape & Reel (TR) ; Number of Resistors: 2 ; Package / Case: TO-236-3, SC-59, SOT-23-3 ; Mounting Type: Surface.

0858BTEBFREQ1 : CRYSTAL OSCILLATOR, CLOCK, 0.375 MHz - 12 MHz, TTL OUTPUT. s: Oscillator Type: XO ; Package / Form Factor: Surface Mount ; Frequency: 0.3750 to 12 MHz ; Operating Temperature: 0 to 70 C (32 to 158 F) ; Output Type: TTL, TTL.

A012-P93-01 : BOARD TERMINATED, MALE, BLINDMATE CONNECTOR, SURFACE MOUNT. s: Connector Type: BLINDMATE CONNECTOR ; Gender: Male ; Termination Types: PCBSolder ; RoHS Compliant: RoHS.

1442500000 : 9 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER. s: Connector Type: TWO PART BOARD CONNECTOR ; Gender: Male ; Termination Types: SOLDER ; Number of Contacts: 9 ; RoHS Compliant: RoHS.

SAP51D-A-G1-T : Interface - Specialized SAP5. ZMDI's SAP51 is a new generation CMOS integrated circuit for AS-I networks. The low-level field bus AS-I (Actuator Sensor Interface) was designed for easy, safe and cost-effective interconnection of sensors, actuators and switches. It transports both power and data over the same two-wire unshielded cable. SAP5S/SAP51 is used.

 
0-C     D-L     M-R     S-Z