Details, datasheet, quote on part number: GA100T8R6MZ
PartGA100T8R6MZ
Category
Description
CompanySharp Microelectronics of the Americas
DatasheetDownload GA100T8R6MZ datasheet
  

 

Features, Applications

Features 1 ) OPIC light detector with built-in RF amplifier (Integrates 8-division PIN photodiode and Amp. IC onto a single chip) CD-R : 60 speed writing CD-ROM : 60 speed reading DVD-ROM: 12 speed reading 3 ) Built-in bypass capacitor for power supply 4 ) Can read various discs such as CD-ROM, CD-R/RW, DVD-ROM, DVD-RAM/R/RW, DVD+R/RW 5 ) Surface mount-leadless package (Package dimensions: 6 ) Applicable for reflow

*OPIC Light Detector for 60 Speed Writing CD-R/RW, 12 Speed Reading DVD-ROM

An OPIC consists of a light-detecting element and a signal-processing circuit integrated onto a single chip.

Specifications (=780nm, Ta=25C) Parameter Supply voltage Output off-set voltage Sensitivity Response frequency Output noise level Settling time Operating temperature Symbol Vcc Vod fc Vn Tset Topr Characteristics 25 mV TYP. 11.3 mV/W TYP. 4.0 mV/W MIN. 60 MHz TYP. - 83 dBm MAX. + 80C Condition Gain High, ~ VD Gain Low, VA ~ VD, 1 MHz base, -3 dB VRF, f=36 MHz,BW=30 kHz VA ~ VD, Output mV -

(Notice)In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.Specifications are subject to change without notice for improvement. (Internet)Data for Sharp's optoelectronic/power devices is provided on internet. (Address http://sharp-world.com/ecg/)



The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: - Personal computers - Office automation equipment - Telecommunication equipment [terminal] - Test and measurement equipment - Industrial control - Audio visual equipment - Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: - Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - Traffic signals - Gas leakage sensor breakers - Alarm equipment - Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - Space applications - Telecommunication equipment [trunk lines] - Nuclear power control equipment - Medical and other life support equipment (e.g., scuba).

If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication.


 

Some Part number from the same manufacture Sharp Microelectronics of the Americas
GA100T8R7MZ
GA100T8W1MZ
GA100TX02MZ Opic Light Detector For X16 Speed DVD-ROM.
GA100TX02MZA
GA100TX03MZ
GA102T1M1MZ Opic Light Detector For 20x Speed Writing Cd-r/rw Power Monitor
GA102T1M2MZ
GA103T8R1MZ
GA104T1M2MZ
GA200T8R1SZ Opic Light Detector For 12x Speed Writing Cd-r/rw
GA201TXR1ZZ Opic Light Detecotr For 12x Speed Writing Cd-r/rw
GA202TXV1SZ
GA202TXV2SZ
GH06507B2A Red Laser Diode For Dvd-rom Drives (654nm-7mW).
GH06510B2A Red Laser Diode For Dvd-rom Drives (654nm-10mW).
GH07885C2C High Power Laser Diode For x8 Speed Cd-r Drive (785nm-85mW).
GH07885D2C Narrow Radiation Angle, High Power Laser Diode For X12 Speed Cd-r Drive (784nm-85mW).
GH07895A2C Narrow Radiation Angle, High Power Laser Diode For X14 Speed Cd-r Drive (784nm-95mW).
GH17805B2AS Insert Frame Structure, Resin Type Laser Diode For Audio Cd/cd-rom Drive (780nm-5mW).
GH20707A2A Dual-wavelength (1package) Laser Diode For Dvd-rom/dvd Video (654nm-7mWm 788nm-7mW).
GH5C105D3A Compact Size, Low Current Drive Hologram Laser For Audio/video CD Player.

GP1U282Y : Remote Control Receiver Modules Replace The GP1U282Y to : GP1UD28_YK Series

LH28F008SCHD-L90 : 8MBIT (1 MB X 8)Smart Voltage Flash Memory 40pin Dip

LT1ET53A : 3.3x2.9mm, 1.1mm Thickness, Milky Diffusion, Dichromatic Chip Led Devices

PC3H2BD : Half Pitch, High Noise Resistance Photocoupler

PC123YA2J00F : Transistor Output Optocouplers Die shrink version PC123AJ0000F Specifications: Manufacturer: Sharp Microelectronics ; Product Category: Transistor Output Optocouplers ; RoHS:  Details ; Configuration: 1 Channel ; Input Type: DC ; Maximum Collector Emitter Voltage: 70 V ; Maximum Collector Emitter Saturation Voltage: 0.2 V ; Isolation Voltage: 5000 Vrms ; C

GM5BC01200AC : LEDs -; LED BLUE CLEAR 6050 SMD Specifications: Color: Blue ; Lens Style/Size: Round with Flat Top, 3.2mm ; Millicandela Rating: 200mcd ; Voltage - Forward (Vf) Typ: 4.6V ; Wavelength - Dominant: 470nm ; Wavelength - Peak: 467nm ; Current - Test: 50mA ; Viewing Angle: - ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Pack

IRM053U6 : 2400 MHz - 2500 MHz RF/MICROWAVE NARROW BAND LOW POWER AMPLIFIER Specifications: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; Frequency Range: 2400 to 2500 MHz ; Minimum Gain: 28 dB ; Package Type: 3 X 3 MM, 0.75 MM HEIGHT, HQFN-16 ; Operating Temperature: -25 to 85 C (-13 to 185 F)

PC904CI : 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER Specifications: Mounting Option: DIP-8 ; Forward Current: 0.0500 amps ; Output: Phototransistor ; Isolation Voltage: 5000 volts ; Collector Emitter Breakdown Voltage: 35 volts ; Operating Temperature: -25 to 85 C (-13 to 185 F)

S2S4RAYF : 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER Specifications: Mounting Option: LEAD FREE, PLASTIC, MINIFLAT, SOP-4 ; Forward Current: 0.0500 amps ; Output: TRIAC OUTPUT WITH ZERO CRSVR ; Isolation Voltage: 3750 volts ; Operating Temperature: -30 to 100 C (-22 to 212 F)

Same catergory

PAA21SR/80427.35-1 : Transducer Pres. This new range of KELLER OEM pressure transmitters and transducers offers the user the high accuracy and stability of the KELLER piezoresistive pressure capsule in a low cost OEM package. Applications include refridgeration, hydraulic controls, air compressors, ink jet printers, vacuum pumps etc. The silicon sensor is mounted in an all welded oil filled.

ST6230B : ST6 Family. ST6230B - 8-BIT ROM/otp/ePROM MCUs With A/D Converter, 16-BIT Auto-reload Timer, EePROM, Spi And Uart.

TA78L024AP : Three Terminal Posivive Regulators.

UPA1912 : P-channel MOS Field Effect Transistor For Switching. The is a switching device which can be driven directly a 2.5-V power source. The PA1912 a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power switch of portable machine and so on. Can be driven a 2.5-V power source Low on-state resistance 50 m MAX. (VGS 52 m MAX. (VGS 70 m MAX. (VGS 2.5 A) PART.

W25P222A : 64k X 32 Burst Pipelined High-speed CMOS Static RAM.

XZBG76W : Material (Color) = InGaN(Green);; Lens = Water Clear;; Peak Wave Length = 520;; Iv(ucd) If@10mA Min.= 180;; Iv(ucd) If@10mA Typ.= 445.

THDD10A : Topstek Current Transducer. i Highly reliable Hall Effect device i Compact and light weight. Two sensors in one package i Fast response time i Excellent linearity of the output voltage over a wide input range i Excellent frequency response 50 kHz) i Low power consumption (33 mA nominal) i Capable of measuring both DC and AC, both pulsed and mixed i High isolation voltage between.

LBN7015 : SAW Filter Electrical Characteristic. s Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Phase Linearity Group Delay Variation Absolute Delay Ultimate Rejection Subatrate Material Ambient Temperature Package Size C DIP2212 China Electronics Technology Group Corporation No.26 Research Institute Notes - Component values may change depending.

JE891HG : Subminiature Intermediate Power Relay. _ -;N=BCHA NSJ?M ;P;CF;<F? _ *CAB M?HMCNCP? _ *CAB MQCN=BCHA =;J;=CNS lxu sx mpk7xzv mxg lx f lyu _ l }ILG xg m }ILG x ;H> f ly =IHN;=N ;LL;HA?G?HN _ |HPCLIHG?HN;F @LC?H>FS JLI>O=N d3I*4 =IGJFC;HNe _ 0ONFCH? {CG?HMCIHMu dmkim R llik R lkioeGG zIHN;=N ;LL;HA?G?HN zIHN;=N L?MCMN;H=? zIHN;=N G;N?LC;F zIHN;=N L;NCHA d3?Mi FI;>e.;Ri MQCN=BCHA.

PCN12E-010S-2.54DSA : Product Compliant to Din41612/iec603-2 Standard. qRight angle through hole type (mounted on the board edge) PCN12EA-* *P-2.54DS qRight angle through hole type (mounted on the board edge) PCN10BA-* *S-2.54DS qRight angle through hole type (mounted on the board) PCN12EA-* *P-2.54DS qRight angle through hole type (mounted on the board) PCN13EA-* *S-2.54DS BApplication Pattern sCircuit Protection Function.

MLX90215EVA : Precision Programmable Linear Hall Effect Sensor. Precision Programmable Linear Hall Effect Sensor Programmable Linear Hall IC Quad Switched / Chopper Stabilized Ratiometric Output for A/D Interface Adjustable Quiescent Voltage (VOQ ) Very Low Quiescent Voltage Temperature Drift Adjustable Sensitivity Adjustable Temperature Compensation of Sensitivity Applications Linear Position Sensing Rotary Position.

HRF-SW1020-E : Rf Evaluation And Development Kits, Board Rf/if And Rfid; BOARD EVALUATION FOR HRF-SW1020. s: Type: Switch, SP4T ; Supplied Contents: Board ; For Use With/Related Products: HRF-SW1020 ; Frequency: 0Hz ~ 2.5GHz ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

6C8X32GI : Fuses CYL 380vac 6A 8 x 32mm. Altech's European Fuses come in a variety of fuses including Diazed (bottled), NH, Cylinder, and Neozed. s: Manufacturer: Altech ; Product Category: Fuses ; RoHS: No ; Current Rating: 6 Amps ; Voltage Rating: 380 Volts ; Fuse Size / Group: 8 mm x 32 mm ; Termination Style: Cartridge ; Fuse Type: Time Delay / Slow Blow ; Body.

44802101 : BEACON, LED, DUAL, 110-230V, RD/GRN. s: Bulb Size: - ; Base Type: - ; Luminous Intensity: - ; Supply Voltage: - ; Light Source: LED ; Power Rating: - ; Current Rating: 15mA ; Flash Rate Per Minute: 65 ; Bulb Diameter: 77mm ; Length: 95mm ; IP/NEMA Rating: IP67.

BD441G : Transistors Bipolar (BJT) 4A 80V 36W NPN. s: Manufacturer: ON Semiconductor ; Product Category: Transistors Bipolar (BJT) ; RoHS:  Details ; Transistor Polarity: NPN ; Collector- Emitter Voltage VCEO Max: 80 V ; Emitter- Base Voltage VEBO: 5 V ; Maximum DC Collector Current: 4 A ; DC Collector/Base Gain hfe Min: 15 ; Maximum Operating Frequency:.

LE ATB A2A : LEDs - High Brightness Power Modules Amber, Blue, Green; LED OSTAR PROJ 4CHIP AMB/GRN/BLU. s: Color: Amber, Blue, Green ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RCL06122R00JNEA : 2 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 2.0 OHM .5W 5% 0612 WIDE. s: Resistance (Ohms): 2 ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

BAS40V-TP : Diodes, Rectifier - Array Discrete Semiconductor Product 200mA 40V Schottky; DIODE SCHOTTKY 40V 200MA SOT563. s: Diode Type: Schottky ; Diode Configuration: 2 Independent ; Voltage - DC Reverse (Vr) (Max): 40V ; Current - Average Rectified (Io) (per Diode): 200mA ; Voltage - Forward (Vf) (Max) @ If: 1V @ 40mA ; Current - Reverse Leakage @ Vr: 200nA.

47100 : ESD Tape; TAPE PACK ESD PROTECTED AREA YEL. s: Tape Type: ESD ; Adhesive: Water-Activated modified Starch ; Backing, Carrier: Paper ; Color: Yellow ; Thickness: 0.0058" (5.8 mils, 0.147mm) ; Usage: Packaging ; Width: 3.00" (76.20mm) 1/4' ; Length: 450' (137.16m) 150 yds ; Temperature Range: 32 ~ 100F (0 ~ 38C) ; Packaging: - ; Thickness - Adhesive:.

IBC38AQT4812-A : 1-OUTPUT 450 W DC-DC UNREG PWR SUPPLY MODULE. s: Package Type: Other, ROHS COMPLIANT PACKAGE-5 ; Output Voltage: 9.7 to 13.4 volts ; Input Voltage: 42 to 53 volts ; Output Power: 450 watts (0.6031 HP) ; Operating Temperature: -40 to 120 C (-40 to 248 F).

 
0-C     D-L     M-R     S-Z