Details, datasheet, quote on part number: SK1303
PartSK1303
CategoryTiming Circuits => Clock Drivers
TitleClock Drivers
Description
CompanySemtech Corporation
DatasheetDownload SK1303 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

is a true differential LVDS Receiver/Driver. This device is designed to support frequency rates in excess of 800 MHz. SK1303 operates over an extended supply range to 5.5V and has a 100 onchip termination resistor across its differential inputs. When the differential LVDS inputs are left open or floating, the output Q will at a logic LOW and at a logic HIGH.

Extended Supply Voltage Range: (VCC to 5.5V; VEE 0V) 800 MHz Minimum Toggle.requency Typical 350 mV Differential LVDS Inputs/Outputs Onchip 100 Input Termination Resistor ESD Protection > 4000V Specified Over Industrial Temperature Range: to 85oC Available in both 8 pin SOIC and MSOP Packages Flammability Rating: UL-94 Code V-0 Moisture sensitivity: Level 1

D, D* Functi on Di fferenti al LVDS i nputs Di fferenti al LVDS Outputs

NOTES: 1. Dimensions are in millimeters. 2. Dimensions D and do no include mold protrusion. 3. Maximum mold protrusion 0.15 per side. 4. Dimension B does not include Dambar protrusion. Allowable Dambar protrusion shall be 0.127 total in excess of the B dimension at maximum material condition.

NOTES: 1. Dimensions are mm 2. Controlling dimension: mm 3. Dimension does not include mold flash or protrusions, either of which shall not exceed 0.20


 

Some Part number from the same manufacture Semtech Corporation
SK1500 1:5 Signal Distribution
SK1504
SK1525
SK15XX
SK1900 1:9 Signal Distribution
SK1903
SK1904
SK1925
SK19XX
SK2111 1:10 Differential LVDS Clock Driver
SK2200 Lvpecl/hstl to HSTL 1:9 High-speed Transceiver Logic Bus Clock Driver
SK4400 Quad Buffer/receiver
SK4429 3 GHZ Quad Buffer / Receiver
SK4430 Quad Buffer/receiver
SK44XX
SL05 300 Watt Low Capacitance 5 PF / Line / SOT-23
SL05TC Low Capacitance TVS Diode For High Speed Data Interfaces
SL12 300 Watt Low Capacitance 5 PF / Line / SOT-23
SL12TC Low Capacitance TVS Diode For High Speed Data Interfaces
SL15 300 Watt Low Capacitance 5 PF / Line / SOT-23
SL15TC Low Capacitance TVS Diode For High Speed Data Interfaces

LM2576T-5-V : 1A & 3A Miniconverter Switching Regulator

ZM1.3C130 : Silicon Planar Power Zener Diodes

4540LN103K6 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

6560DN103Z3 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

3333EX103J8 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

JAN6M : 1 A, 600 V, SILICON, SIGNAL DIODE Specifications: Package: HERMETIC SEALED PACKAGE-2 ; Number of Diodes: 1 ; IF: 1000 mA

JANTXV6148AUS : 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Unidirectional ; Package: HERMETIC SEALED, SURFACE MOUNT PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 6.12 volts

4EX222K5 : CAP,CERAMIC,2.2NF,5KVDC,10% -TOL,10% +TOL,X7R TC CODE,-15,15PPM TC Specifications: Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition

Same catergory

548-03 : . Packaged in 16 pin narrow (150 mil) SOIC Input clock to 160 MHz in the non-PLL mode Provides clock outputs of CLK, and CLK/2 Low skew (500 ps) on CLK, and CLK/2 All outputs can be tri-stated Entire chip can be powered down by changing one or two select pins or 5.0V operating voltage The is a low cost, low skew, high performance general-purpose clock.

ASTX-06ASVTX-06ASVTX-07 : Crystal Oscillators. 9.0 X 7.0 X 2.0 MM Leadless Smt, 3Vdc 12MHz to 19MHz.

CLV0910A : Package Style = MINI-14S ;; Frequency (MHz) = 902 to 928 ;; N@10KHz (dBc/Hz) = -112 ;; Tuning Voltage (Vdc) = 0.50 to 3.00 ;; Tuning Sensitivity (MHz/V) = 27 ;; Power (dBm) = 1.00 ± 2.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 3.30 ;; Icc (mA) = 15.

CY23S08SC-1 : PLL Based Clock Distribution Device. Zero input-output propagation delay, adjustable by capacitive load on FBK input Multiple configurations, see Table 2 Multiple low-skew outputs Output-output skew less than 200 ps Device-device skew less than 700 ps Two banks of four outputs, three-stateable by two select inputs to 133-MHz operating range Low jitter, less than 200 ps cycle-cycle ­1H,.

CY2410 : Mpeg With Vcxo. Integrated phase-locked loop (PLL) Low-jitter, high-accuracy outputs VCXO with analog adjust 3.3V operation Pin-for-pin compatible with -5, -6) Advanced Serial programming interface (CY2410-3 only) Lower drive strength settings (CY2410-4, -6) Matches nonlinear MK3727 VCXO control curve (CY2410-5, -6) Part Number CY2410-5 CY2410-6 Outputs Input Frequency.

HD151TS403SS : HD151TS series for PCMB. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

ICS84025AM : Fibrechannel 1, Gigabit Ethernet, Infiniband, Frequency Synthesizer. CRYSTAL-TO-LVCMOS / LVTTL FREQUENCY SYNTHESIZER WITH FANOUT BUFFER 6 LVCMOS/LVTTL outputs Crystal oscillator interface Output frequency range: to 125MHz Crystal input frequency: 25MHz and 25.5MHz RMS phase jitter at 106.25, using a 25.5MHz crystal 10MHz): 3.25ps Phase noise: Offset Noise Power 100Hz. -100 dBc/Hz 1KHz. -115 dBc/Hz 10KHz. -125 dBc/Hz.

KHR0975A01 : = Resonator ;; Package = -.

MK2011 : Clock Circuits. Fast Ethernet Clock Source. The MK2011 is the ideal way to generate clocks for Fast Ethernet cards or systems. It provides 20MHz, 25MHz, and 50MHz clocks. an 8 pin SOIC, the MK2011 can save component count, board space, and cost over surface mount crystals and oscillators, and increase reliability by eliminating two or three mechanical devices from the board. MicroClock offers.

MK2771-15 : Clock Circuits. Vcxo And Set-top Clock Source. The is a low cost, low jitter, high performance VCXO and clock synthesizer designed for set-top boxes. The on-chip Voltage Controlled Crystal Oscillator accepts to 3V input voltage to cause the output clocks to vary by ±100 ppm. Using ICS/MicroClock's patented VCXO and analog Phase-Locked Loop (PLL) techniques, the device uses an inexpensive 13.5 MHz pullable.

MLS9109-00881 : Frequency Synthesizers. Cdma 869-894 Mhz, Surface Mount Frequency Synthesizer.

RO2156D : SAW Resonators. Frequency = 868.95 ;; = Resonator. Ideal for European 868.95 MHz Transmitters Very Low Series Resistance Quartz Stability The is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 868.95 MHz. This SAW is designed specifically for remote-control.

TFS433K : SAW Devices (Surface Acoustic Wave). Application = Keyless Entry ;; Center Frequency = 433.42 MHZ ;; 3 DB = 150kHz ;; Pass Band Ripple =   ;; Insertion Loss = 5.0dB ;; Group Delay Ripple =   ;; Package = 7 MM X 5 MM LCC.

V630ME24 : Package Style = MINI-14H ;; Frequency (MHz) = 2710 to 3010 ;; N@10KHz (dBc/Hz) = -90 ;; Tuning Voltage (Vdc) = 0.50 to 5.50 ;; Tuning Sensitivity (MHz/V) = 102 ;; Power (dBm) = 0.00 ± 3.00 ;; Op.temp ( C) = -40 to 85 ;; VCC (Vdc) = 5.00 ;; Icc (mA) = 14.

VCO-204 : Hi-rel Vco. Model: VCO-204 Rev: Date: 7/22/2002 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 100 MHz 200 MHz Tuning Sensitivity: 100 MHz 125 MHz 150 MHz 175 MHz 200 MHz Output Power Output Phase Noise: 10 kHz 100 kHz 1000 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic).

W312-02 : FTG For Via KT266 Chipset With Programmable Output Frequency. Single chip FTG solution for VIA KT266 Chipset Programmable clock output frequency with less than 1 MHz increment Integrated fail-safe Watchdog timer for system recovery Automatically switch to HW selected or SW programmed clock frequency when watchdog timer time-out Capable of generate system RESET after a watchdog timer time-out occurs or a change.

ISL12082 : 2C-bus™ Real Time With Two Interrupts, Alarm, And Timer Low Power RTC With Battery ReSeal™, 2 IRQs, And Crystal Compensation The ISL12082 device is a low power real time clock with timing and crystal compensation, clock/calendar, power fail indicator, 2 IRQs, periodic or polled alarm, timer/watchdog, and intelligent battery backup switching..

 
0-C     D-L     M-R     S-Z