Details, datasheet, quote on part number: SK10EL57W
CategoryLogic => Multiplexers/Demultiplexers => Multiplexers
Description4:1 Differential Multiplexer
CompanySemtech Corporation
DatasheetDownload SK10EL57W datasheet
Cross ref.Similar parts: MC10EL57D


Features, Applications

The a 4:1 Differential Multiplexer. It is fully compatible with MC10/100EL57. The SEL1 input, being the most significant select line, allows the device to operate as either or 4:1 multiplexer. If left open, it will at a logic low due to the internal input pulldown resistor which, in turn, allows the device to be used a 2:1 multiplexer. Multiple VBB outputs are provided for single-ended use or DC bias for AC coupling to the device. VBB is an output pin and should be used as a bias for the SK10/100EL57W as its current source/sink capability is limited. Whenever used, the VBB output pins should be bypassed to VCC via 0.01 F capacitors.


Extended Supply Voltage Range: (VEE to 3.0V, VCC 0V) or (VCC to +5.5V, VEE = 0V) High Bandwidth Output Transition 420 ps typical Propagation Delay VBB Output Internal Input Pulldown Resistors Useful as either or 2:1 Multiplexer New Differential Input Common Mode Range Fully Compatible with MC10/100EL57 ESD Protection of >4000V Industrial Temperature Range: to +85oC Available in 16 Pin SOIC Package (150 mil)

Pin Dn - Dn* Function Differential Data Inputs MUX Select Inputs Differential Data Output Reference Voltage

NOTES: 1. Dimensions and tolerances per ANSI 1982. 2. Controlling dimension: millimeter. 3. Dimensions A and B do not include mold protrusion. 4. Maximum mold protrusion 0.150 (0.006) per side. 5. Dimension D does not include Dambar protrusion. Allowable Dambar protrusion shall 0.13 (0.005) total in excess of d dimension at maximum material condition.

Characteristic Q, Q* (DIFF) ke w Dn, Dn* Q, Q* Minimum Input Swing4 Common Mode Range5


Some Part number from the same manufacture Semtech Corporation
SK10ELT20W LVTTL to Diff Lvpecl or TTL to Diff Pecl Translator
SK10ELT21W Differential Pecl to CMOS/ttl or Lvpecl to Lvcmos/lvttl Translator
SK10ELT22W Dual Lvttl/lvcmos to Lvpecl or Ttl/cmos to Pecl Translator
SK10ELT25W Differential Ecl to CMOS/ttl or Lvecl to Lvcmos/lvttl Translator
SK10EP111 Low-voltage 1:10 Differential
SK10LVE111E Low Voltage 1:9 Differential Ecl/pecl Clock Driver
SK12429LV High-frequency PLL Frequency Synthesizer
SK1500 1:5 Signal Distribution

22HCB : Silicon Planar Zener Diode

BXZ85/C8V2 : Silicon Planar Power Zener Diodes

EZ1084BC : 5 Amp Low-dropout Regulator

EZ1086C : 1.5 Amp Positive Voltage Regulator

BZT03C330 : Silicon Z-diodes AND Transient Voltage Suppressors

3333LX103J3 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

ISOPAC0619 : HIGH Current Isolated Rectifier Assembly

5040AN103Z3 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

6666EN103M4 : HIGH Voltage Capacitors Monolithic Ceramic TYPE

SC668 : 8 LED Light Management Unit Automatic Dropout Prevention , Ambient Light Sense Input, PWM Dimming, and 4 LDOs The SC668 is a highly integrated light management unit that provides programmable current for up to eight LED current sinks. Four LED banks are provided to allow settings for various LED zones or indicators. Four low-noise LDOs with programmable outputs ranging from 1.2V to 3.3V and 200mA maximum ou

JANTX1N6114A : 0.85 A, 50 V, SILICON, SIGNAL DIODE Specifications: Package: HERMETIC SEALED, G5, 2 PIN ; Number of Diodes: 1 ; IF: 850 mA

SM24C.TC : 300 W, BIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Bidirectional ; Pin Count: 3 ; Number of Diodes: 1 ; VBR: 26.7 volts

0-C     D-L     M-R     S-Z