Details, datasheet, quote on part number: SK10EL16TAD
PartSK10EL16TAD
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Differential Amplifiers
DescriptionDifferential Receiver
CompanySemtech Corporation
DatasheetDownload SK10EL16TAD datasheet
  

 

Features, Applications

The SK10/100EL16TA-TD are differential receivers with optional input/output terminations. The EL16TA-TD family is pin-to-pin compatible with SK10/100EL16W and Motorola's MC10/100EL16 and MC10/100LVEL16, with added features of input/output terminations. The different options of input/output terminations of the EL16TA-TD make them ideal for use in high frequency design applications. It can also reduce the part count where board space is scarce. The SK10/100EL16TA has a 100 resistor across its differential inputs. The output of this device has emitter follower structure and must be terminated with to 2V. This device is used in applications where the driving source has terminated outputs. Please refer to Figure 1 for more details. The SK10/100EL16TB has a 100 resistor and 8 mA current sources across its differential inputs. The latter will provide a DC path for the output currents of the driving source. The output of this device has emitter follower structure and must be terminated with to 2V. This device is used in applications where the driving source may not need output termination. Please refer to Figure 2 for more details. The SK10/100EL16TC has a 100 resistor across its differential inputs and 8 mA current sources across its differential outputs. This device is used in applications where the driving source may not need output termination. Please refer to Figure 3 for more details. The SK10/100EL16TD has a 100 resistor across its differential inputs, 50 series resistance, and 8 mA current sources at its outputs. The outputs of this device may not need any termination because of the internal output 50 series resistor and current source. This device is used in applications where the driving source may not need output termination. Please refer to Figure 4 for more details. The SK10/100EL16TA-TD provides a VBB output for either single-ended use a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16TA-TD as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to VCC via 0.01 F capacitor.

Extended Supply Voltage Range (VEE to 3.0V, VCC 0V) or (VCC to +5.5V, VEE = 0V) High Bandwidth Output Transitions 300 ps Propagation Delay VBB Output Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D* ESD Protection of >4000V Specified Over Industrial Temperature Range: to 85oC Available in 8 Pin SOIC Package

Pin Q, Q* VBB.unction Differential Data Inputs Differential Data Outputs Reference Output Voltage

SK10/100EL16TC Input Termination with 100 Resistor Across the Differential Inputs and 8 mA Output Source Termination


SK10/100EL16TB Input Termination with 100 Resistor and 8 mA Current Source across the Differential Inputs and without on chip Output Termination

SK10/100EL16TD Input Termination with 100 Resistor Across the Differential Inputs and 8 mA Output Source Termination with 50 Series Resistor

NOTES: 1. Dimensions are in millimeters. 2. Dimensions D and do no include mold protrusion. 3. Maximum mold protrusion 0.15 per side. 4. Dimension B does not include Dambar protrusion. Allowable Dambar protrusion shall be 0.127 total in excess of the B dimension at maximum material condition.


 

Related products with the same datasheet
SK10EL16TADT
SK10EL16TBD
SK10EL16TBDT
SK10EL16TCD
SK10EL16TCDT
SK10EL16TDD
SK10EL16TDDT
SK10EL16TU
SK10EL16VD
SK10EL16VDT
SK10EL16VMS
Some Part number from the same manufacture Semtech Corporation
SK10EL16TADT Differential Receiver
SK10EL16V Differential Receiver With Variable Output Swing
SK10EL16VD Differential Receiver
SK10EL16W
SK10EL16X
SK10EL16XWA High-gain Differential Receiver
SK10EL17W
SK10EL31W
SK10EL32W
SK10EL33W 4 Divider
SK10EL38W 2, 4/6 Clock Generation Chip
SK10EL39W 2/4, 4/6 Clock Generation Chip
SK10EL52W Differential Data And Clock D Flip-flop
SK10EL56W
SK10EL57W 4:1 Differential Multiplexer
SK10EL58
SK10EL89
SK10EL90W
SK10EL91W
SK10ELT20W LVTTL to Diff Lvpecl or TTL to Diff Pecl Translator
SK10ELT21W Differential Pecl to CMOS/ttl or Lvpecl to Lvcmos/lvttl Translator

LM2576T-5-H : 1A & 3A Miniconverter Switching Regulator

E7725AXF : 900 MHz Dual Pin Electronics Driver, Window Comparator, and Load The Edge7725 dual channel, monolithic ATE pin electronics solution is manufactured in a high-performance complementary bipolar process.

SK1300MST : PECL / Lvpecl to LVDS Translator

BZT15HS : Silicon Planar Zener Diodes

ZMC5235 : Silicon Planar Zener Diodes

E622AHJ : ACTIVE DELAY LINE, COMPLEMENTARY OUTPUT, PQCC28 Specifications: Delay Line Type: Programmable Delay Line ; Package Type: Surface Mount, HEAT SPREADER, PLASTIC, LCC-28 ; Time Delay: 34 ns

EZ1583CM-2.5 : 1.5 V FIXED POSITIVE LDO REGULATOR, 0.6 V DROPOUT, PSSO5 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, TO-263, 5 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.5 volts ; IOUT: 1.5 amps ; VIN: 1.75 to 5.5 volts ; Dropout Voltage: 0.6000 volts

JANTX1N6146US : 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Unidirectional ; Package: HERMETIC SEALED PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 6.12 volts

JANTX1N6150AUS : 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Unidirectional ; Package: HERMETIC SEALED PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 6.12 volts

JANTXV1N6153US : 1500 W, UNIDIRECTIONAL, SILICON, TVS DIODE Specifications: Configuration: Single ; Direction: Unidirectional ; Package: HERMETIC SEALED PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 1 ; VBR: 6.12 volts

JTXV1N6127 : 500 W, BIDIRECTIONAL, 2 ELEMENT, SILICON, TVS DIODE Specifications: Arrangement: Common Catode ; Diode Type: Transient Voltage Suppressor Diodes ; VBR: 6.46 volts ; Package: HERMETIC SEALED, GLASS PACKAGE-2 ; Pin Count: 2 ; Number of Diodes: 2

SC2982CSK-3.3T : 1.8 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO5 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed ; Package Type: Other, SOT-23, 5 PIN ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.75 to 1.85 volts ; VIN: 2.5 to 16 volts ; Dropout Voltage: 0.2000 volts

 
0-C     D-L     M-R     S-Z