Details, datasheet, quote on part number: BF1207
PartBF1207
CategoryDiscrete => Transistors => FETs (Field Effect Transistors) => MOSFETs => N-Channel
DescriptionDual N-channel dual gate MOSFET
The BF1207 is a combination of two dual gate MOSFET amplifiers with shared source and gate2 leads and an integrated switch.

The source and substrate are interconnected. Internal bias circuits enable Direct Current (DC) stabilization and a very good cross-modulation performance during Automatic Gain Control (AGC). Integrated diodes between the gates and source protect against excessive input voltage surges. The BF1207 has a SOT363 micro-miniature plastic package.

CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.



Features
Two low noise gain controlled amplifiers in a single package. One with a fully integrated bias and one with partly integrated bias
Internal switch to save external components
Superior cross-modulation performance during AGC
High forward transfer admittance
High forward transfer admittance to input capacitance ratio



Applications
Gain controlled low noise amplifiers for Very High Frequency (VHF) and Ultra High Frequency (UHF) applications with 5 V supply voltage, such as digital and analog television tuners and professional communication equipment
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload BF1207 datasheet
Quote
Find where to buy
 
PackagesSOT363 (UMT6)
  

 

Features, Applications

The is a combination of two dual gate MOSFET amplifiers with shared source and gate2 leads and an integrated switch. The source and substrate are interconnected. Internal bias circuits enable Direct Current (DC) stabilization and a very good cross-modulation performance during Automatic Gain Control (AGC). Integrated diodes between the gates and source protect against excessive input voltage surges. The BF1207 has a SOT363 micro-miniature plastic package.

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

s Two low noise gain controlled amplifiers in a single package. One with a fully integrated bias and one with partly integrated bias s Internal switch to save external components s Superior cross-modulation performance during AGC s High forward transfer admittance s High forward transfer admittance to input capacitance ratio

s Gain controlled low noise amplifiers for Very High Frequency (VHF) and Ultra High Frequency (UHF) applications with 5 V supply voltage, such as digital and analog television tuners and professional communication equipment

Table 1: Quick reference data Per MOSFET unless otherwise specified. Symbol Parameter VDS ID Ptot yfs drain-source voltage drain current total power dissipation forward transfer admittance Conditions DC Tsp = 1 MHz amplifier 18 mA amplifier mA Ciss(G1) input capacitance = 100 MHz amplifier A amplifier B Crss NF Xmod reverse transfer capacitance = 100 MHz noise figure cross-modulation amplifier = 400 MHz amplifier = 800 MHz input level for 40 dB AGC amplifier A amplifier B Tj

Table 2: Pin Discrete pinning Description drain (AMP A) source drain (AMP B) gate1 (AMP gate2 gate1 (AMP A)

© Koninklijke Philips Electronics N.V. 2005. All rights reserved.

Table 3: Ordering information Package Name BF1207 Description plastic surface mounted package; 6 leads Version SOT363 Type number

= p: Made in Hong Kong. = t: Made in Malaysia. = W: Made in China.

Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDS IG1 IG2 Ptot Tstg Tj

Parameter drain-source voltage drain current gate1 current gate2 current total power dissipation storage temperature junction temperature


 

Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
74ALVT16823 18-bit bus-interface D-type flip-flop with reset and enable; 3-stateThe 74ALVT16823 18-bit bus interface register is designed to eliminate the extra packages required to buffer existing registers and provide
PH1955L N-channel TrenchMOS logic level FETLogic level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. FeaturesLogic level threshold Low
PMWD22XN Dual N-channel microTrenchMOS extremely low level FETDual common drain N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. FeaturesLow
74AUP1G08 Low-power 2-input AND gateThe 74AUP1G08 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs
74AUP1G02 Low-power 2-input NOR gateThe 74AUP1G02 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs
74AUP1G00 Low-power 2-input NAND gateThe 74AUP1G00 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs
74AUP1G126 Low-power buffer/line driver; 3-stateThe 74AUP1G126 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action
74AUP1G34 Low-power bufferThe 74AUP1G34 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs makes
74AUP1G125 Low-power buffer/line driver; 3-stateThe 74AUP1G125 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action
PCA9511A Hot swappable I2C and SMBus bus bufferThe PCA9511A is a hot swappable I2 C-bus and SMBus buffer that allows I/O card insertion into a live backplane without corrupting the data and clock buses. Control
74AUP1G32 Low-power 2-input OR gateThe 74AUP1G32 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs
74AUP1G14 Low-power Schmitt-trigger inverterThe 74AUP1G14 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. This device ensures a very
74AUP1G04 Low-power inverterThe 74AUP1G04 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs makes
74AUP1G06 Low-power inverter with open-drain outputThe 74AUP1G06 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger
74AUP1G86 Low-power 2-input EXCLUSIVE-OR gateThe 74AUP1G86 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action
74AUP1G17 Low-power Schmitt-trigger bufferThe 74AUP1G17 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs
74AUP1GU04 Low-power unbuffered inverterThe 74AUP1GU04 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible families. This device ensures a very low static
UJA1065 High speed CAN/LIN system basis chipThe UJA1065 System Basis Chip (SBC) replaces basic discrete components which are common in every Electronic Control Unit (ECU) with a Controller Area Network (CAN)
PHP28NQ15T N-channel TrenchMOS standard level FETStandard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. FeaturesLow body diode Qr Fast
PCF8562 Universal LCD driver for low multiplex ratesThe PCF8562 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD) with low multiplex rates. It generates the drive signals for any static
BTA201 Triacs logic levelPassivated guaranteed commutation triacs in a plastic package. The 'sensitive gate' E and ER series are intended for interfacing with low power drivers, including microcontrollers.

74AVC16373DGG : 74AVC16373; 16-bit D-type Transparent Latch; 3.6 V Tolerant; 3-state;; Package: SOT362-1 (TSSOP48)

BTA204M-500C : BTA204S Series B And C; BTA204M Series B And C; Three Quadrant Triacs High Commutation

BZG03-C200 : BZG03 Series; Voltage Regulator Diodes

PCF8558U : LCD Drivers/Controllers

PHP42N03T : PHP42N03T; Trenchmos (tm) Transistor Standard Level Fet

S83C654FFAA : CMOS Single-chip 8-bit Microcontroller

SA1620 : SA1620; Low Voltage GSM Front-end Transceiver

P89CV51RC2 : 8-bit 80C51 5 V Low Power 64 KB Flash Microcontroller With 1 KB RAM, SPI, 6-clock CPU The P89CV51RB2/RC2/RD2 are three types of 80C51 microcontroller with respectively 16 kB/32 kB/64 kB flash and 1 kB of data RAM. These devices are designed to be drop-in and software-compatible replacements for the

PZU24BL : Single Zener Diodes General-purpose Zener diodes in SOD882 leadless ultra small Surface-Mounted Device (SMD) plastic package.

BF1216 : Dual N-channel Dual Gate MOSFET The BF1216 is a combination of two dual gate MOSFET amplifiers with shared source and gate2 leads. The source and substrate are interconnected. Internal bias circuits enable DC stabilization and very good cross modulation performance during AGC. Integrated diodes bet

LXK8-PW27-0016-A : High Power LEDs - White Warm White, 2700K Philips Lumileds LUXEON& 174; K High Efficiency LED Arrays deliver high flux or high radiometric power at high efficacy--up to 4400 lumens of perfectly consistent, quality white light--in a small, easy-to-use package. The high lumen density enables high light output in thermally and space constraine

Same catergory

BAW56 : Small Signal Switching Diodes in SOT563. NSDEMP11XV6T1, NSDEMP11XV6T5 Common Anode Quad Array Switching Diode These Common Anode Epitaxial Planar QUAD Diodes are designed for use in ultra high speed switching applications. The NSDEMP11XV6T1 device is housed in the SOT-563 package which is designed for low power surface mount applications, where board space at a premium. Fast trr Low CD Available.

BFQ540 : BFQ540; NPN Wideband Transistor;; Package: SOT89 (MPT3, UPAK). High gain High output voltage Low noise Gold metallization ensures excellent reliability Low thermal resistance. APPLICATIONS VHF, UHF and CATV amplifiers. QUICK REFERENCE DATA SYMBOL VCBO VCES VEBO IC Ptot hFE 21 F Note Ts is the temperature at the soldering point of the collector pin. PARAMETER collector-base voltage collector-emitter voltage collector-base.

FQU8N25 : Enhancement N-Channel. 250V N-channel QFET. These N-Channel enhancement mode power field effect transistors are produced using Fairchild's proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices.

H2N6388 : 10A NPN Epitaxial Planar Transistor For General Purpose Amplifier And Switching Applications.

NTHS4101PT1G : -20V TrenchFET , Package: ChipFET, Pins=8. NTHS4101PT1 Product Preview -20 V, P-Channel Power MOSFET ChipFETt Single Package Offers an Ultra Low RDS(on) Solution in the ChipFET Package Miniature ChipFET Package 40% Smaller Footprint than TSOP-6 making it an Ideal Device for Applications where Board Space at a Premium Low Profile (<1.1 mm) Allows it to Fit Easily into Extremely Thin Environments.

SBD2040CT : Schottky Barrier Rectifiers ( 20a,30-45v ).

STF13NM60N-H : N-channel 600 V, 0.28 ?, 11 A MDmesh™ II Power MOSFET In TO-220FP N-channel 600 V, 0.28 ?, 11 A MDmesh™ II Power MOSFET in TO-220FP.

06033A3R3KA77A : CAPACITOR, CERAMIC, MULTILAYER, 25 V, C0G, 0.0000033 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 3.30E-6 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 25 volts ; Temperature Coefficient: 30 ppm/°C ; Mounting Style:.

ERAS : RESISTOR, METAL FILM, 0.1 W, 5 %, 1500; 2700; 3300; 3900 ppm, 6.2 ohm - 10000 ohm, SURFACE MOUNT, 0805. s: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0805, CHIP ; Operating Temperature: -40 to 125 C (-40 to 257 F).

FQB90N08TM : 71 A, 80 V, 0.016 ohm, N-CHANNEL, Si, POWER, MOSFET, TO-263. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 80 volts ; rDS(on): 0.0160 ohms ; Package Type: D2PAK-3 ; Number of units in IC: 1.

MQ1N6076US : 1.3 A, SILICON, RECTIFIER DIODE. s: Configuration: Single ; Package: MELF, HERMETIC SEALED, GLASS, D-5B, MELF-2 ; Pin Count: 2 ; Number of Diodes: 1 ; IF: 1300 mA ; trr: 0.0300 ns.

PCIS20-100M : GENERAL PURPOSE INDUCTOR. s: Application: General Purpose. Extremely small size and shielded which allows for high mounting density Flat top for pick and place assembly Designed for reflow solder mounting Ideal for hand held devices Low DCR compared to most other comparable inductors Wide inductance range to 10000µh Electrical Inductance Range: to 10000µh. Tolerance: ±20% over the entire inductance range. Test.

RW1101KE : RESISTOR, POTENTIOMETER, WIRE WOUND, 1 TURN(S), 1 W, 100 ohm. s: Category / Application: General Use ; Mounting / Packaging: Bolt-on Chassis, ROHS COMPLIANT ; Standards and Certifications: RoHS ; Resistance Range: 100 ohms ; Tolerance: 10 +/- % ; Power Rating: 1 watts (0.0013 HP).

STPS30120CDJF-TR : 30 A, 120 V, SILICON, RECTIFIER DIODE. s: Configuration: Single ; Package: 6 X 5 MM, ROHS COMPLIANT, POWER, PLASTIC, QFN-8 ; Pin Count: 3 ; Number of Diodes: 1 ; IF: 30000 mA ; VRRM: 120 volts.

2472MAM3060LTN110 : CAP,AL2O3,4.7MF,100VDC,20% -TOL,20% +TOL. s: Applications: General Purpose ; Electrolytic Capacitors: Aluminum Electrolytic.

337ACZ035M : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 35 V, 330 uF, SURFACE MOUNT, 3939. s: RoHS Compliant: Yes ; : Polarized ; Capacitance Range: 330 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 35 volts ; Leakage Current: 116 microamps ; ESR: 603 milliohms ; Mounting Style: Surface Mount Technology ; EIA Case Size: 3939 ; Operating Temperature:.

593D106X9025C8W : CAPACITOR, TANTALUM, SOLID, POLARIZED, 25 V, 10 uF, SURFACE MOUNT, 2412. s: Configuration / Form Factor: Chip Capacitor ; General : Polarized ; Capacitance Range: 10 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 25 volts ; Leakage Current: 2.5 microamps ; Mounting Style: Surface Mount Technology ; EIA Case Size: 2412 ; Operating Temperature: -55 to 85 C (-67.

 
0-C     D-L     M-R     S-Z