Details, datasheet, quote on part number: LN252RP
PartLN252RP
CategoryOptoelectronics => Display => LEDs => LED Lamps => Point-Lighting LEDs
TitlePoint-Lighting LEDs
DescriptionBrightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 4.0×4.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LN252RP datasheet
Cross ref.Similar parts: LNG252RDR
Quote
Find where to buy
 
  

 

Features, Applications

LN252RP LNG252RDR Red LN352GP LNG352GDG Green LN452YP LNG452YDX Amber s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Topr(C) Red Green Amber

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25C) Conventional Part No. LN352GP LN452YP Unit Lighting Lens Color Red Diffused Green Diffused Amber Diffused - IO Typ 1.0 3.0 mcd Min 0.40 1.00 mcd 20 mA Typ V VF Max V P Typ 590 nm Typ 20 mA Max A VR


Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LN352GP
LN452YP
LNG252RDR
LNG352GDG
LNG452YDX
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LN252RPH Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 4.0×4.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN252RPX Square Type
LN253RP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.7 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN2561244UNB Panel Display Units
LN260RCPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Clear ;; Remarks = ;; Package =
LN260RCPX Square Type
LN260RPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN260RPX
LN263CPP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 2.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =
LN264CP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =
LN265RPH Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 1.8×1.8 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN268RP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×1.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN268RPH Square Type
LN273RP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×5.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN273RPH Square Type
LN275RPX Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.9×1.75 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN276RCPX Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.2 ;; Lighting Color = Red ;; Lens Color = Red Clear ;; Remarks = ;; Package =
LN276RPX
LN277CALX Ultra Bright Gaaias Lamps
LN277RPX Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LN277WALX Brightness = High Brightness ;; Type 1 = Round Type ;; Type 2 = Gaalas ;; Outline (mm) = Round 3.0 ;; Lighting Color = Red ;; Lens Color = White Diffused ;; Remarks = ;; Package =

EEE-1AA221XP : 220F Aluminum Capacitor Radial, Can - SMD 10V; CAP ALUM 220UF 10V 20% SMD Specifications: Capacitance: 220F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85C ; Size / Dimension: 0.315" Dia (8.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) ; Mounting Type: Surface Mount ; Packa

ECW-H16622RHV : 6200pF Film Capacitor Radial; CAP FILM 6200PF 1.6KVDC RADIAL Specifications: Capacitance: 6200pF ; Tolerance: 3% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Tape & Box (TB) ; Lead Spacing: 0.295" (7.50mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: High Frequency and High St

ELC-09D120DF : Fixed Inductors, Coils, Choke 12H 2.3A Radial -; COIL CHOKE 12UH RADIAL Specifications: Inductance: 12H ; Tolerance: 20% ; Package / Case: Radial ; Packaging: Tape & Reel (TR) ; Type: - ; Current: 2.3A ; Mounting Type: Through Hole ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 31 mOhm ; Shielding: Unshielded ; Applications: General Purpose ;

EZA-NT54AAAJ : Rc Network - Resistor & Capacitor Filter; RC NETWORK 470 OHM/220PF 5% SMD Specifications: Resistance (Ohms): 470 ; Capacitance: 220pF ; Power (Watts): 0.063W, 1/16W ; Tolerance: Resistance 5%, Capacitance +30%, -20% ; Package / Case: 2512 (6432 Metric), Concave ; Packaging: Digi-Reel ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERA-3AEB1073V : 107K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 107K OHM 1/10W .1% 0603 SMD Specifications: Resistance (Ohms): 107K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-8ENF93R1V : 93.1 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 93.1 OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 93.1 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EFCH881MTDB1 : SAW FILTER Specifications: Filter Design: Saw Filter

ADP5200 : Board Mount Pressure Sensors +/-100 kPa 3 mm Pressure Sensor SMD Panasonic Air Pressure Sensors are high precision gauge pressure sensors available with or without amplifier. The sensors also come with or without a glass base in a DIP terminal. Pressure ratings range from -100 to +1000kPa. Panasonic ADP5 Air Pressure Sensors feature built-in amplification and

Same catergory

CA56-21YWA : Material: GAASp/gap , Wavelength: 588nm. The Yellow source color devices are made with Yellow Light Emitting Diode. l EASY MOUNTING ON P.C. BOARDS OR SOCKETS. lMECHANICALLY RUGGED. Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. s are subject to change without notice. C A56-21YWA Dic e YELLOW (GaAsP/GaP) p e WHITE D IFFUSED D es ommon.

DM2423 : 24 Characters X 2 Line Liquid Crystal Dot Matrix Display Module.

G8211-12 : . G8340/G8343/G8211/G8346 series are high-speed receivers specifically developed for 1.3/1.55 m band optical fiber communications. These devices incorporate a high-speed, high-sensitivity InGaAs PIN photodiode and a high-speed preamp integrated in a pigtail module. Packages are available with various connectors and mounting styles. Applications G8340.

HDSP-A153-00Z00 : 7.6 MM ( 0.3 Inch ) Micro Bright Seven Segment Displays. mm (0.3 inch) Micro Bright Seven Segment Displays Technical Data Available with Colon for Clock Display Compact Package x 0.500 inches Leads mm (0.1 inch) Centers Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast 50 Viewing.

RCM1637U-A : . Thanks to the high contrast and wide viewing angle of the RCM1637U-A, which is provided by its unique design technology, this module brings forth new applications in brand new LCD fields. ROHM large-sized LCD units are perfect displays for information or sign boards. As a media for informational display, large-sized LCD units must possess high visibility,.

T6A11A : CMOS 1 Chip Lsi For LCD Slectronic Calcutator.

MV5055 : Standard LED - Through Hole Red Solid State Lamp Diffused. » » » LEDs - High Brightness - Leaded - Red LEDs - High Brightness - Leaded - Red Standard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: Everlight ; Product Category: Standard LED - Through Hole ; RoHS:  Details.

CA10931_Boom-W : LED Lighting Reflectors ACRICHE P7 SNGL REFLECTOR-TAPE. » » » Optics - Reflectors Optics - Reflectors EDs often require optical beam shaping in order to steer their emitted light radiation in the desired direction or pattern. Sometimes, the best choice for the designer is a Reflector. A reflector is a device or surface that redirects.

LUW CN7N-KYLX-EMKM-46-Z : High Power LEDs - White Ultra White. » » » LEDs for General Lighting ApplicationsThis covers an extremely broad group, including applications where LED lighting can be used in lieu of conventional lighting sources. s: Manufacturer: Osram Opto Semiconductor ; Product Category: High Power LEDs - White ; RoHS:  Details ; Illumination.

S2S3LA0F : Triac & SCR Output Optocouplers 5mA Ift 600V nonZC Phototriac 3Kpcs. s: Manufacturer: Sharp Microelectronics ; Product Category: Triac & SCR Output Optocouplers ; RoHS:  Details ; Output Device: PhotoTriac ; Isolation Voltage: 3750 Vrms ; Peak Output Voltage (Vdrm): 600 V ; Maximum Input Voltage: 1.4 V ; Maximum Output Voltage: 420 VAC ; Minimum.

SSL-LX3054UWC/B : LEDs -; LED 3MM WHITE WATER CLEAR LENS. s: Color: White, Cool ; Lens Style/Size: Round with Domed Top, 3mm, T-1 ; Millicandela Rating: 900mcd ; Voltage - Forward (Vf) Typ: 3.6V ; Wavelength - Dominant: 8600K ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: 20 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: Radial.

HDSP-7801 : 7-Segment Green 10-DIP (0.200", 5.08mm) 1 digit 0.30" (7.62mm) Display Modules - LED Character and Numeric; LED 7-SEG 7.6MM CA GREEN RHD. s: Display Type: 7-Segment ; Color: Green ; Package / Case: 10-DIP (0.200", 5.08mm) ; Number of Digits/Alpha: 1 ; Size / Dimension: 0.50" L x 0.30" W x 0.24" H (12.7mm x 7.6mm x 6.1mm) ; Common Pin: Common Anode ; Digit/Alpha.

CLM3C-AKW-CTBVA253 : LEDs -; LED AMBER 591NM 2.7X2MM 2PLCC. s: Color: Amber ; Lens Style/Size: Oval with Flat Top, 2.7mm x 2mm ; Millicandela Rating: 627.5mcd ; Voltage - Forward (Vf) Typ: 2.1V ; Wavelength - Dominant: 591nm ; Wavelength - Peak: - ; Current - Test: 20mA ; Viewing Angle: 120 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: 2-PLCC.

553-0202-200F : LED , Round with Domed Top, 3mm 1.9V 2mA Green, Blank Through Hole, Right Angle; LED CBI 3MM BI-LVL BLANK/GREEN. s: Color: Green, Blank ; Mounting Type: Through Hole, Right Angle ; Configuration: 2 High ; Voltage Rating: 1.9V ; Current: 2mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: Bulk ; Lens Type: Diffused, Tinted ; Lead Free Status:.

LTL5V3SSS : LEDs -; LED OVAL NO FLNG ALINGAP AMBER. s: Color: Amber ; Lens Style/Size: Oval with Domed Top, 5.7mm x 4.7mm ; Millicandela Rating: 1150mcd ; Voltage - Forward (Vf) Typ: 2.35V ; Wavelength - Dominant: 590nm ; Wavelength - Peak: 591nm ; Current - Test: 20mA ; Viewing Angle: 70, 35 ; Lens Type: Diffused, Tinted ; Luminous Flux @ Current - Test: - ; Package.

LXH8-FW27-3 : LED LUXEON T SMD. s: Family: LED Lighting - White ; Series: Luxeon T ; CCT (K): 2725K (3-Step SDCM MacAdam Ellipse) ; Flux @ 25°C, Current - Test: - ; Lumens/Watt @ Current - Test: 95 lm/W ; Current - Test: 700mA ; Voltage - Forward (Vf) Typ: 2.8V ; CRI (Color Rendering Index): 80 ; Current - Max: 1A ; Lumens @ Current - Max: 254 lm ; Voltage - Forward.

FODM8801C : Transistor Output Optocouplers OptoHiT Phototrans 75V 1-Ch CTR 400%. s: Manufacturer: Fairchild Semiconductor ; Maximum Collector Emitter Voltage: 75 V ; Maximum Collector Emitter Saturation Voltage: 0.4 V ; Isolation Voltage: 3750 Vrms ; Maximum Forward Diode Voltage: 1.8 V ; Maximum Power Dissipation: 300 mW ; Maximum Operating Temperature: + 125 C ; Minimum.

 
0-C     D-L     M-R     S-Z