|Category||Optoelectronics => Display => LEDs => LED Lamps => Point-Lighting LEDs|
|Description||Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.7×2.7 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download LN249RPH datasheet
Conventional Part No. Global Prat No. Lighting Color
LN249RPH LNG249RFR Red LN349GPH LNG349GFG Green LN449YPH LNG449YFX Amber LN849RPH LNG849RFD Orange s Absolute Maximum Ratings (Ta = 25°C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Red Green Amber OrangePulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lens Color Red Diffused Green Diffused Amber Diffused Red Diffused -
Gallium arsenide material (GaAs) is used in this product.
Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR
|Related products with the same datasheet|
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|LN249RPX Square Type|
|LN250RP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×5.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
|LN250RPX Square Type|
|LN251CAL Ultra Bright Gaaias Lamps|
|LN251CALU Brightness = High Brightness ;; Type 1 = Square Type ;; Type 2 = Gaalas ;; Outline (mm) = Rectangle 4.0×2.0 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =|
|LN251RCPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 4.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Clear ;; Remarks = ;; Package =|
|LN252RPX Square Type|
|LN253RP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.7 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
|LN2561244UNB Panel Display Units|
|LN260RCPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Clear ;; Remarks = ;; Package =|
|LN260RCPX Square Type|
|LN260RPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
|LN263CPP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 2.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =|
|LN264CP Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =|
|LN265RPH Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 1.8×1.8 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
ECA-2DM4R7B : 4.7µF Aluminum Capacitor Radial, Can 200V; CAP ALUM 4.7UF 200V 20% RADIAL Specifications: Capacitance: 4.7µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85°C ; Size / Dimension: 0.315" Dia (8.00mm) ; Lead Spacing: 0.197" (5.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Can
ERJ-1GNF1152C : 11.5K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 11.5K OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 11.5K ; Power (Watts): 0.05W, 1/20W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±200ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERA-6AEB9090V : 909 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 909 OHM 1/8W .1% 0805 SMD Specifications: Resistance (Ohms): 909 ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-S1TF9761U : 9.76K Ohm 1W Chip Resistor - Surface Mount; RES ANTI-SULFUR 9.76KOHM 1% 2512 Specifications: Resistance (Ohms): 9.76K ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-6ENF47R5V : 47.5 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 47.5 OHM 1/8W 1% 0805 SMD Specifications: Resistance (Ohms): 47.5 ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERZ-SF2MK470 : Tv - Varistors, Mov Circuit Protection 125A 47V; SUR ABSORB ZNR SF 47V 125A SMD Specifications: Maximum AC Volts: 30VAC ; Maximum DC Volts: 38VDC ; Current-Surge: 125A ; Package / Case: 2-SMD, J Lead ; Varistor Voltage: 47V ; Energy: 1.8J ; Number of Circuits: 1 ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
XN0111300L : Transistor (bjt) - Arrays, Pre-biased Discrete Semiconductor Product 100mA 50V 300mW 2 PNP - Pre-Biased (Dual); TRANS ARRAY PNP/PNP W/RES MINI5P Specifications: Transistor Type: 2 PNP - Pre-Biased (Dual) ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 300mW ; Resistor - Base (R1) (Ohms): 47K ; Resistor - Emitter Base (R2) (Ohms): 47K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300µA, 10m
ELJRE15NGFB : 1 ELEMENT, 0.015 uH, GENERAL PURPOSE INDUCTOR, SMD Specifications: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Lead Style: WRAPAROUND ; Standards and Certifications: RoHS ; Application: General Purpose, RF Choke ; Inductance Range: 0.0150 microH ; Inductance Tolerance: 2 (+/- %) ; DCR: 0.4100 ohms ; Rated DC Current: 350
EXFFP8101MBC : BUSSED C NETWORK, 50V, YB, 0.0001uF, THROUGH HOLE MOUNT, SIP-9 Specifications: Configuration / Form Factor: Chip Capacitor ; Applications: General Purpose ; Capacitance Range: 1.00E-4 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 50 volts ; Mounting Style: Through Hole ; Operating Temperature: -25 to 85 C (-13 to 185 F)
GL382 : Infrared Laser. Irda-based SIR System-conforming Infrared Emitting Diode.
HLMP-DJ08 : T-13/4 ( 5 MM ) Precision Optical Performance Alingap Led Lamps. T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps Technical Data SunPower Series HLMP-DLXX HLMP-GHXX HLMP-DJXX HLMP-GGXX HLMP-DHXX HLMP-ULXX HLMP-DGXX HLMP-UJXX HLMP-GLXX HLMP-UHXX HLMP-GJXX HLMP-UGXX Well Defined Spatial Radiation Patterns Viewing Angles: High Luminous Output Colors: 590 nm Amber 605 nm Orange 615 nm Reddish-Orange 626 nm Red High.
L1027 : Precision Half Spherical Lamps. Line No. Part No. L1010 L1040 Volts Amps Lumens Color Temp. Degrees Kelvin Life Hours Vacuum Or Gas V G Krypton Halogen V Halogen Filament Type C-2R C-6 Filament Dimensions Lgth. x Dia. Base Type Brass Drawing Line No. 8 9 Part No. L8010 L8015 Volts 5.0 6.0 Amps 0.770 1.600 Lumens 26 75 Color Temp. Degrees Kelvin 2,420 2,900 Life Hours 10,000 150 Vacuum.
LSA676-NR : Hyper Sideled Hyper-bright Led. Gehäusefarbe: weiß als optischer Indikator einsetzbar zur Hinterleuchtung, Lichtleiter- und Linseneinkopplung für alle SMT-Bestück- und Reflow-Löttechniken geeignet gegurtet (12-mm-Filmgurt) color of package: white for use as optical indicator for backlighting, optical coupling into light pipes and lenses suitable for all SMT assebly and reflow-soldering.
LYE676 : Power Topled Hyper-bright Led. Vorläufige Daten / Preliminary Data Besondere Merkmale Gehäusebauform: P-LCC-4 Gehäusefarbe: weiß als optischer Indikator einsetzbar zur Hintergrundbeleuchtung, Lichtleiter- und Linseneinkopplung für alle SMT-Bestücktechniken geeignet gegurtet (8 mm-Filmgurt) JEDEC Level 3 nur IR Reflow Löten P-LCC-4 package color of package: white for use as optical.
SFH628A-4 : . Very High CTR at IF=1.0 mA, SFH628A-4, 160500% Specified Minimum CTR V: 32% (typical V: 50% (typical 160%) Good CTR Linearity Depending on Forward Current Low CTR Degradation High Collector-emitter Voltage, VCEO=55 V Isolation Test Voltage, 5300 VRMS Low Coupling Capacitance Field-Effect Stable by TRIOS (TRansparent IOn Shield) End-Stackable, 0.100".
SG-290 : Photointerrupters ( Transmissive ). The SG°©290 photointerrupter high°©performance standard type,combines high°©output GaAs IRED with high sensitive phototransistor Ultra-compact size. ¶UPWB direct mount type ¶UGAP £ 1.0mm ¶UHigh resolution £®slit 0.15mm ¶U Ultr° a© compact APPLICATIONS ¶U Copiers ¶UVideo movies ¶UDigital cameras ¶U Encoders Power dissipation Forward current Input Reverse.
SSL-LX5098USBD : T-5mm Dome, Extra Long Leads.
TLP191B : Photovoltaic Output. Pin = 4 ;; Package = Sop ;; Short Current Isc (uA) (Min.) = 24 ;; Open Voltage Voc (Min.) = 7 ;; ISOlation Voltage BVS (Vrms) = 2500 ;; Application/ = High Output Current, Internal Shunt Resistor.
TLP3023 : Pin = 5 ;; Package = Dip ;; Led Trigger Current Ift (Max.) (mA) = 5 ;; Blocking Voltage VDRM (V) = 400 ;; On-state Current (mA Max.) = 100 ;; Zero Crossing = no ;; ISOlation Voltage BVS (Vrms) = 5000 ;; = Transition to TLP3023(S) ;; Additional Information = .
XZSG55W : Material (Color) = InGaAlP(Green);; Lens = Water Clear;; Peak Wave Length = 574;; Iv(ucd) If@10mA Min.= 18;; Iv(ucd) If@10mA Typ.= 69.
PC900V0NIPXF : High Speed Optocouplers SMT PC900V0NSZXF. s: Manufacturer: Sharp Microelectronics ; Product Category: High Speed Optocouplers ; RoHS: Details ; Configuration: 1 Channel ; Maximum Forward Diode Voltage: 1.4 V ; Maximum Reverse Diode Voltage: 6 V ; Maximum Power Dissipation: 170 mW ; Maximum Operating Temperature: + 85 C ; Minimum Operating Temperature:.
MV67539MP5 : LED , Round with Domed Top, 5mm 2.1V 20mA Red Through Hole; LED SS HI EFF RED DIFF PCB 5MM. s: Color: Red ; Mounting Type: Through Hole ; Configuration: Single ; Voltage Rating: 2.1V ; Current: 20mA ; Lens Style/Size: Round with Domed Top, 5mm ; Packaging: Bulk ; Lens Type: Diffused, Tinted ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
SSP-LXC1287U24 : Display Modules - LED Dot Matrix and Cluster Blue 21V; LED T-5MM 32.5MM RND 24LED ULT B. s: Color: Blue ; Size / Dimension: 1.28" Dia x 0.42" H (32.50mm x 10.70mm) ; Millicandela Rating: 2000mcd ; Configuration: 24 Round ; Voltage - Forward (Vf) Typ: 21V ; Internal Connection: -.
OPF500 : Fiber Optics - Receivers 4.5 V ~ 16 V; RECEIVER FIBER OPTIC 200KPBS. s: Applications: General Purpose ; Voltage - Supply: 4.5 V ~ 16 V ; Data Rate: 200Kbps ; Power - Minimum Receivable: - ; Current - Supply: 12mA ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
GL4910JE000F : Infrared Emitters 1.7V; EMITTER IR 850NM 4.2MW SIDE T/H. s: Voltage - Forward (Vf) Typ: 1.7V ; Current - DC Forward (If): 100mA ; Wavelength: 850nm ; Viewing Angle: 64° ; Radiant Intensity (Ie) Min @ If: - ; Mounting Type: Through Hole ; Package / Case: Radial ; Orientation: Side View ; Packaging: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS.
STK-070R : TFT Displays & Accessories 7" 800x480 w/ Touch 280nits w/ GEMstudio. Amulet Technologies Resistive 7" Color TFT GEMmodule& 8482; is a fully integrated WVGA production color display module designed to support a variety of embedded control interface applications. Featuring the Amulet GEM Graphical OS Chip& 8482; for color displays, the module can be easily.