|Category||Optoelectronics => Display => Infrared Emitters => Infared Light Emitting Diodes|
|Title||Infared Light Emitting Diodes|
|Description||I<SMALL><SUB>F</SUB></SMALL>(mA)(mA) = 100 ;; P<SMALL><SUB>D</SUB></SMALL>(mW) = 160 ;; P<SMALL><SUB>O</SUB></SMALL><SMALL><SUP></SUP></SMALL>I<SMALL><SUB>E</SUB></SMALL>min.(mW) = 10mW/sr. ;; V<SMALL><SUB>F</SUB></SMALL>max.(V) = 1.6 ;; L <SMALL><SUB>P</SUB></SMALL>typ.(nm) = 950 ;; L Typ.(deg) = 20 ;; Package = LT5RR102-001|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download LN166 datasheet
|Cross ref.||Similar parts: LNA2904L|
High-power output, high-efficiency = 10 mW/sr (min.) Emitted light spectrum suited for silicon photodetectors Good radiant power output linearity with respect to input current High center radiant intensity Transparent epoxy resin package
Parameter Power dissipation Forward current (DC) Pulse forward current Reverse voltage (DC) Operating ambient temperature Storage temperature
Parameter Center radiant intensity Peak emission wavelength Spectral half band width Forward voltage (DC) Reverse current (DC) Capacitance between pins Half-power angle Symbol IR Ct Conditions = 1MHzNote) The part number in the parenthesis shows conventional part number.
Gallium arsenide material (GaAs) is used in this product.
Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR
|Related products with the same datasheet|
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|LN170WP38 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.4 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =|
|LN172 IF(mA)(mA) = 100 ;; PD(mW) = 170 ;; POIEmin.(mW) = 7 ;; VFmax.(V)|
|LN173WP38 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0 ~5.0 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =|
|LN175 IF(mA)(mA) = 100 ;; PD(mW) = 170 ;; POIEmin.(mW) = 7 ;; VFmax.(V)|
|LN184 Gaalas Infrared Light Emitting Diode|
|LN1851C Led Surface Mounting Chip Led|
|LN1851CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =|
|LN1861C Surface Mounting Chip Led|
|LN1861CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =|
|LN1871Y5TR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LN189L Gaalas Infrared Light Emitting Diode|
|LN213RPP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×2.5 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
|LN2162C13 Surface Mounting Chip Led|
|LN2162C13TR Brightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =|
|LN2162C68 Surface Mounting Chip Led|
|LN2162C68TR Brightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =|
|LN216RP Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×7.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =|
UNR1212 : RETs (Resistor Equipped transistors) Marking = ;; VCEO(V) = 50 ;; IC(A) = 0.1 ;; PT(W) = 0.4 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = M-A1
EEE-FC1A101P : 1000µF Aluminum Capacitor Radial, Can - SMD 10V; CAP ALUM 1000UF 10V 20% SMD Specifications: Capacitance: 1000µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 1000 Hrs @ 105°C ; Size / Dimension: 0.394" Dia (10.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.406" L x 0.406" W (10.30mm x 10.30mm) ; Mounting Type: Surface Mount ;
EEE-HDV470XAP : 47µF Aluminum Capacitor Radial, Can - SMD 35V; CAP ALUM 47UF 35V 20% SMD Specifications: Capacitance: 47µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 5000 Hrs @ 105°C ; Size / Dimension: 0.248" Dia (6.30mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) ; Mounting Type: Surface Mount ; Packa
ERA-3AEB332V : Thin Film Resistors - SMD 0603 1/10W 3.3Kohms Panasonic offers ERA/ERJ Current Sense Resistors with high reliability, low resistance, and high power. The ERJA/B series is available in wide terminal, high power and a resistance tolerance of ±1%. The ERJ/ERJM series Current Sensing Resistors offer low resistance values (1mΩ to 100mΩ
ERJ-8ENF8252V : 82.5K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 82.5K OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 82.5K ; Power (Watts): 0.25W, 1/4W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ERJ-S1TF75R0U : 75 Ohm 1W Chip Resistor - Surface Mount; RES ANTI-SULFUR 75 OHM 1% 2512 Specifications: Resistance (Ohms): 75 ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
EXB-24V913JX : Resistor 91K Ohm 62.5mW 2 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 91K OHM 2 RES 0404 Specifications: Resistance (Ohms): 91K ; Tolerance: ±5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 4 ; Packaging: Tape & Reel (TR) ; Number of Resistors: 2 ; Package / Case: 0404 (1010 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: ±200ppm/°
ERA-14EB473U : 47K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 47K OHM 1/4W .1% 1210 Specifications: Resistance (Ohms): 47K ; Power (Watts): 0.25W, 1/4W ; Tolerance: ±0.1% ; Packaging: Digi-Reel® ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
MN103SE4K : 32-BIT, MROM, MICROCONTROLLER, PQFP80 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 60 MHz ; ROM Type: MROM ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 61 ; Package Type: QFP, Other, 14 X 14 MM, LEAD FREE, PLASTIC, QFP-80 ; Pin Count: 80 ; Features: PWM
APJA2107EC : 2.1 X 0.7 MM SMD Chip Led Lamp. High Efficiency Red (peak Wavelength 627 Nm). Lens Type Water Clear..
APK3020PWC : Material: Ingan , Wavelength:. !3.0mmX2.0mm SMT LED, 1.3mm THICKNESS. !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS The source color devices are made with InGaN on SiC Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(±0.004") unless otherwise noted. 3. s are subject to change without notice.
BC56-13EWA : Material: GAASp/gap , Wavelength: 625nm. !0.56 INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. ! EASY The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. s are subject to change.
CNZ2253 : applications = High Sensitivity ;; IF(mA) = 50 ;; VCEO(V)(V) = 20 ;; ICmin.(mA) = 3 ;; ICEOmax.(µA)(µA) = 0.5 ;; Tr;; Tftyp.(µs) = 150 ;; VCE(sat)max.(V) = 1.5 ;; Package = PRSTR104-002.
GP1U77R : Remote Control Receiver Modules. IR Detecting Unit For Remote Control.
HDSP-511A : Segment Displays. 14.22 MM (0.56 Inch) Single Digit General Purpose Seven Segment Display.
HIR67-23C/L11/TR8 : . High radiant intensity Peak wavelength p=850nm View angle 130 High reliability Small double-end package is an infrared emitting diode in miniature SMD package which is molded in a water clear plastic with flat top view lens. The device is spectrally matched with silicon photodiode and phototransistor. Infrared source in tactile keyboard IR diode in low space.
LP377TRO1-40G : P4 Red-orange Algainp Ultra Bright Led. Low Profile 4 Pin Plastic Package Water Clear Lens High Flux Output High Current Operation Applications Automotive Interior Exterior Lighting Rail Signals Traffic Control Devices Channel Letters Strip Lighting Architectural Lighting Characteristic Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Soldering Temperature.
NL3224AC35-01 : Diagonal 14cm (5.5type) Display Area Color LCD.
OPR2100L : 890nm. Led 890nm Surface Mount Led Surface Mount. Surface mountable High temperature operation Closely matched emissions Matched to OPR2100 Photodiode Absolute Maximum Ratings (Each channel, 25o C unless otherwise noted) Reverse Voltage. 2.0 V Continous Forward Current. 50 mA Peak Forward Current (1 µA pulse width, 300 pps). 1.0 A Storage and Operating Temperature. +125o C Power Dissipation (derate.
SFH620A-1 : ac Input, 4 Pin, Single. APPROVALS l UL recognised, File No. E91231 The SFH620A series of optically coupled isolators consist of inverse parallel infrared light emitting diodes and NPN silicon photo transistors in space efficient dual in line plastic packages. l Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after.
SSF-LXH2579SUGD : 2x5 Horizontal 2-Leaded Led, Mating.
TA16-11EWA : Material: GAASp/gap , Wavelength: 625nm. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. INCH MATRIX HEIGHT. SIZE 3mm. CONTRAST AND LIGHT OUTPUT. WITH ASCII AND EBCDIC CODES. HORIZONTALLY AND VERTICALLY. MOUNTING ON P.C. BOARDS OR SOCKETS. FOR LUMINOUS INTENSITY. RUGGED. Digitally signed by Nenuphar cn=Nenuphar,.
XVF2LUY32D : Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 14.
FA11003_Lisa2-WW-Pin-OSL : LED Lighting Lenses with Holder OSRAM OSLON SSL SNGL LENS HLDR. LEDiL 's Lenses for OSRAM OSLON SSL LEDs are available in a wide range of lens sizes and configurations to provide optical solutions with your OSRAM OSLON SSL LED s. These secondary lenses are fastened with position pins, glue, adhesive tape, screws, snap pins, or a holder, the LEDiL Lenses.
561-5902-050F : LED , Round with Domed Top, 5mm 3.5V 20mA Green Through Hole; LED CBI 5MM GRN WATER CLR 0.500". s: Color: Green ; Mounting Type: Through Hole ; Configuration: Single ; Voltage Rating: 3.5V ; Current: 20mA ; Lens Style/Size: Round with Domed Top, 5mm ; Packaging: Bulk ; Lens Type: Clear ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
LTPL-P00DWS57 : LEDs - >75mA, High Brightness, Power White, Cool; LED COOL WHITE 5700K SMD. s: Color: White, Cool ; Package / Case: 6-SMD, Flat Leads ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
NZ10150-02-T2-GA : LEDs - >75mA, High Brightness, Power White, Warm; LED WARM WHITE 3000K 400MA SMD. s: Color: White, Warm ; Package / Case: 2-SMD, No Lead ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
HFBR-1515B : Fiber Optics - Transmitters - Discrete 2.1V; XMITTER FIBER OPTIC PROFIBUS ST. s: Connector Type: ST ; Current - DC Forward (If): 60mA ; Voltage - Forward (Vf) Typ: 2.1V ; Voltage - DC Reverse (Vr) (Max): 3V ; Wavelength: 650nm ; Spectral Bandwidth: 21nm ; Capacitance: 60pF ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
XZMD20X92S-4 : LED 3.5X3.5MM 0.5W DEEP RED SMD. SunLED is excited to introduce the high-power and high-current LED series, Axsolight. This slim LED array is close to 2 inches long and contains 15 dies to provide a wide, evenly distributed linear light beam with a 120 degree viewing angle. It is capable of producing up to 7 W of high luminous output while consuming.