Details, datasheet, quote on part number: LN1251CALTR
PartLN1251CALTR
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LN1251CALTR datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Ultra Hight Bright Surface Mounting Chip LED

s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Topr(C) Tstg(C) Ultra Bright Red

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25C) Conventional Lighting Lens Color Part No. Color Bright LN1251CAL (TR) Ultra Clear Red Unit - IO Typ 9.0 mcd Min 3.3 mcd 10 mA Typ V VF Max V P Typ 660 nm Typ 15 mA Max 3 V



Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ251C4ARA
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LN1251CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1261C Surface Mounting Chip Led
LN1261CALTR Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1261CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1271R Ln1261cal
LN1271RALTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1351C Led Surface Mounting Chip Led
LN1351CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1361CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1371G Ln1261cal
LN1371GTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN138WP38 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN142WP34 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0 ~2.0 ;; Lighting Color = Green/amber ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN1451C Led Surface Mounting Chip Led
LN1451CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN145W IF(mA)(mA) = 40 ;; PD(mW) = 1 ;; POIEmin.(mW) = 2.6 ;; VFmax.(V)
LN1461C Surface Mounting Chip Led
LN1461CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1471Y Ln1261cal
LN1471YTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN151F IF(mA)(mA) = 100 ;; PD(mW) = 160 ;; POIEmin.(mW) = 5 ;; VFmax.(V)

EEUFC0J102 : Aluminum Electrolytic Capacitors/fc

ELF-18D412 : 1.2A Common Mode Choke Filter - Power Line; FILTER LINE 6.8MH 1.2A TYPE 400 Specifications: Inductance: 6.8mH ; Impedance: - ; DC Resistance (DCR): 290 mOhm ; Current: 1.2A ; Filter Type: Power Line ; Mounting Type: Through Hole ; Package / Case: Vertical, 4 PC Pin ; Packaging: Bulk ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

ELJ-FB821KF : Fixed Inductors, Coils, Choke 820H 45mA 1812 (4532 Metric) -; INDUCTOR 820 UH 10% 1812 SMD Specifications: Inductance: 820H ; Tolerance: 10% ; Package / Case: 1812 (4532 Metric) ; Packaging: Tape & Reel (TR) ; Type: - ; Current: 45mA ; Mounting Type: Surface Mount ; Q @ Freq: 30 @ 796kHz ; Frequency - Self Resonant: 2.4MHz ; DC Resistance (DCR): 45 Ohm Max ; Shielding: Unshielded ;

ERJ-6ENF1780V : 178 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 178 OHM 1/8W 1% 0805 SMD Specifications: Resistance (Ohms): 178 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-14NF2431U : 2.43K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 2.43K OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 2.43K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S06F7870V : 787 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES ANTI-SULFUR 787 OHM 1% 0805 Specifications: Resistance (Ohms): 787 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-P14J364U : 360K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES ANTI-SURGE 360K OHM 5% 1210 Specifications: Resistance (Ohms): 360K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

CNB13020R0LF : Optical - Reflective - Analog Output SENSOR OPTO TRANS 1MM REFL PCB -; SENSOR OPTO TRANS 1MM REFL PCB Specifications: Sensing Distance: 0.039" (1mm) ; Sensing Method: Reflective ; Output Type: Phototransistor ; Voltage - Collector Emitter Breakdown (Max): 30V ; Current - Collector (Ic) (Max): 20mA ; Current - DC Forward (If): 50mA ; Response Time: 20s, 20s ; Operating Temperature: -25C ~ 85C ; M

2SC26360R : Transistor (bjt) - Single Discrete Semiconductor Product 50mA 20V 400mW NPN; TRANS NPN 20VCEO 50MA M TYPE Specifications: Transistor Type: NPN ; Voltage - Collector Emitter Breakdown (Max): 20V ; Current - Collector (Ic) (Max): 50mA ; Power - Max: 400mW ; DC Current Gain (hFE) (Min) @ Ic, Vce: 25 @ 2mA, 10V ; Vce Saturation (Max) @ Ib, Ic: - ; Frequency - Transition: 1.6GHz ; Current - Collector Cutoff

DRA3144E0L : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 100mA 50V 100mW PNP - Pre-Biased; TRANS PNP W/RES 50V SSSMINI3 Specifications: Transistor Type: PNP - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 100mW ; Resistor - Base (R1) (Ohms): 47K ; Resistor - Emitter Base (R2) (Ohms): 47K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 500A, 10mA ; Curre

ABS4621503 : ABS Type Turquoise Switches Sealed construction for use in adverse environment-Sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP67* of IEC protective construction classi?cation ? Elastomer double molding technolo

MA743TX : 0.03 A, 2 ELEMENT, SILICON, SIGNAL DIODE Specifications: Diode Type: General Purpose ; IF: 30 mA ; Pin Count: 4 ; Number of Diodes: 2

Same catergory

AM27SRD08 : Material: Gaalas , Wavelength: 640nm. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting l LONG LIFE - SOLID STATE RELIABILITY. lPACKAGE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without notice.

APBA03-41VGKWA : Material: Ingan , Wavelength: 525nm. The Green source color devices are made with InGaN on SiC Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. s are subject to change whitout notice. Par t No. Dic m A Min. APBA03-41VGKWA GREEN (InGaN) WHITE DIFFUSED p. 45200 Common Anode,Rt. Hand Decimal D es Sy peak VF IR Par et er Peak.

APPSA04-41PWFA : Material: Ingan , Wavelength:. l0.4 INCH CHARACTER HEIGHT. lLOW CURRENT OPERATION. lHIGH CONTRAST AND LIGHT OUTPUT. The source color devices are made with InGaN on SiC Light Emitting Diode. l EASY MOUNTING ON P.C. BOARDS OR SOCKETS. lCATEGORIZED FOR LUMINOUS INTENSITY. lMECHANICALLY RUGGED. l STANDARD Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless.

HDSP-511A : Segment Displays. 14.22 MM (0.56 Inch) Single Digit General Purpose Seven Segment Display.

LD262 : Miniature Infrared Emitter Arrays. Miniature GAAS Infrared Emitter Array, 2 Emitters, 950 NM.

LNQ15001 : Full Color Led Lamp For Outdoor Use. Absolute Maximum Ratings (Ta = 25C) Item Pwer Dissipation Symbol Red PD Green Blue Supply Current for LED Reverse Voltage Operating Ambient Temperature Storage Temperature Main s (Ta = 25C) Item Forward Voltage Reverse Current Peak Emission Wavelength Symbol IR P Red Green Red Green Red Green Red Luminous Intensity 1cd Viewing Angle (1 cd up) Mass.

SA5311 : Led Lamp. Red Colored transparency lens type 5mm(T-13/4) all plastic mold type High reliability and low power consumption Power Dissipation Forward Current * Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature 260 for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/16, Pulse width 0.1ms *2.Keep the distance more than 2.0mm.

SEL4x25x : Uni-Color LED Lamp. Absolute maximum ratings (Ta=25C) Symbol IF IFP VR Top Tstg Unit mA mA/C V C Rating to +100 Condition Above f=1kHz, tw100s SEL4225R SEL4825A Amber SEL4825D SEL4925A Orange SEL4925D SEL4725K Yellow SEL4725Y SEL4425E Green SEL4425G Pure green SEL4525C Red Clear Diffused red Transparent orange Diffused orange Transparent orange Diffused orange Transparent.

TLRY5420 : Led 5mm 12v Yellow. Color High efficiency red Yellow Green Type TLRY5420 TLRG5420 Technology GaAsP on GaP GaAsP on GaP on GaP Angle of Half Intensity 30 These devices are developed for the automotive industry with special requirements as for EMC (electro magnetic compatibility) in motor vehicles with 12 V supply voltage. They are resistant against transient conduction.

W91576DNF : 23-memory Tone/pulse Dialer With Autoredial Rec And LCD Display Functions.

XDUY46A : Material (Color) = GAASp/gap (Yellow);; Lens = ;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 3000;; Iv(ucd) If@10mA Typ.= 7990.

XZSG46W-3 : Material (Color) = InGaAlP(Green);; Lens = Water Clear;; Peak Wave Length = 574;; Iv(ucd) If@10mA Min.= 280;; Iv(ucd) If@10mA Typ.= 595.

XZSGK76W : Material (Color) = InGaAlP(Green);; Lens = Water Clear;; Peak Wave Length = 574;; Iv(ucd) If@10mA Min.= 110;; Iv(ucd) If@10mA Typ.= 199.

HT16525 : 5x8 Dot Character VFD Controller & Driver The HT16525 device is a dot matrix Vacuum Fluorescent Display, VFD, controller/driver which displays characters, numerics and symbols. Dot matrix VFD driving signals are received via a 3-line serial interface driven by an externally connected microcontroller. The display data is stored in the internal ROM and RAM for character.

TLP124(BV-TPR,F) : Transistor Output Optocouplers 80Vceo 3750Vrms Low input current. s: Manufacturer: Toshiba ; Product Category: Transistor Output Optocouplers ; RoHS:  Details ; Configuration: 1 Channel ; Input Type: DC ; Maximum Collector Emitter Voltage: 80 V ; Maximum Collector Emitter Saturation Voltage: 0.4 V ; Isolation Voltage: 3750 Vrms ; Current Transfer.

CL-827-ELP60-PC : Optics - LEDs, Lamps - Lenses -; INTEMATIX CHROMALIT ELLIPSE. s: Color: - ; For Use With/Related Products: - ; Lens Style/Size: Round with Domed Top, 23.5mm ; Viewing Angle: - ; Mounting Type: - ; Type: Remote Phosphor Light Source ; Optical Pattern: - ; Number of LEDs: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LY G6SP-BBDA-36-1-Z : LEDs - >75mA, High Brightness, Power Yellow; LED PWR TOPLED YELLOW CLR 6-PLCC. s: Color: Yellow ; Package / Case: 6-PLCC ; Packaging: Cut Tape (CT) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

597-3401-507F : LEDs -; LED YELLOW 588NM 1208 SMD. s: Color: Yellow ; Lens Style/Size: Rectangle with Flat Top, 2.3mm x 1.6mm ; Millicandela Rating: 6.3mcd ; Voltage - Forward (Vf) Typ: 2.1V ; Wavelength - Dominant: 588nm ; Wavelength - Peak: 585nm ; Current - Test: 20mA ; Viewing Angle: 110 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case:.

 
0-C     D-L     M-R     S-Z