Details, datasheet, quote on part number: LN0401GP3
PartLN0401GP3
CategoryOptoelectronics => Display => LEDs => LED Lamps => Surface Lighting LEDs
TitleSurface Lighting LEDs
DescriptionOutline (mm) = 15×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LN0401GP3 datasheet
Cross ref.Similar parts: LNV304101A
Quote
Find where to buy
 
  

 

Features, Applications

LN0401GP3 LNV304101A Green LN0401YP4 LNV404101A Amber LN0401RP8 LNV804101A Orange s Absolute Maximum Ratings (Ta = 25°C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Red Green Amber Orange

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lens Color Red Diffused Green Diffused Amber Diffused Red Diffused -


Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LN0401RP2
LN0401RP8
LN0401YP4
LNV204101A
LNV304101A
LNV404101A
LNV804101A
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LN0401RP2 Outline (mm) = 15×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0402WP38 Outline (mm) = 15×5 ;; Lighting Color = Green ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN0603GP3 Outline (mm) = 20×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0801WP23 Outline (mm) = 15×12 ;; Lighting Color = Red ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN086WP38 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN117WP23 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.3×1.8 ;; Lighting Color = Red ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN11CP23 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 5.0 ;; Lighting Color = Red/green ;; Lens Color = Clear ;; Remarks = ;; Package =
LN11WP23
LN11WP34
LN11WP38
LN1251C Led Surface Mounting Chip Led
LN1251CALTR Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1251CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1261C Surface Mounting Chip Led
LN1261CALTR Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1261CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1271R Ln1261cal
LN1271RALTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1351C Led Surface Mounting Chip Led
LN1351CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1361CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =

ELJNA221KF : Chip Inductors

ECOS2WA151DA : Large Can Aluminum Electrolytic Capacitors

AQV259A : SSR, PHOTO MOSFET, 1000V, 30mA Specifications: Load Voltage Max: 1kV ; Load Current: 30mA ; On State Resistance Max: 200ohm ; Contact Configuration: SPST-NO ; Isolation Voltage: 1.5kV ; Forward Current If: 900µA ; Relay Terminals: SMD ; MSL: -

ELJ-QF4N3ZF : Fixed Inductors, Coils, Choke 4.3nH 360mA 0402 (1005 Metric) Non-Magnetic Core; INDUCTOR 4.3NH +-.2NH 0402 SMD Specifications: Inductance: 4.3nH ; Tolerance: ±0.2nH ; Package / Case: 0402 (1005 Metric) ; Packaging: Tape & Reel (TR) ; Type: Non-Magnetic Core ; Current: 360mA ; Mounting Type: Surface Mount ; Q @ Freq: 39 @ 800MHz ; Frequency - Self Resonant: 5GHz ; DC Resistance (DCR): 160 mOhm Max ; Shiel

DSK5J01Q0L : Jfet (junction Field Effect) Discrete Semiconductor Product 2mA @ 10V 55V 150mW Surface Mount; J FET N CH 55V 30MA SMINI3-F2-B Specifications: Mounting Type: Surface Mount ; FET Type: N-Channel ; Drain to Source Voltage (Vdss): 55V ; Current - Drain (Idss) @ Vds (Vgs=0): 2mA @ 10V ; Input Capacitance (Ciss) @ Vds: 6pF @ 10V ; Power - Max: 150mW ; Packaging: Digi-Reel® ; Package / Case: SC-85 ; Voltage - Cutoff (VGS off) @ I

ERJ-6ENF2102V : 21K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 21.0K OHM 1/8W 1% 0805 SMD Specifications: Resistance (Ohms): 21K ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S03J184V : 180K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES ANTI-SULFUR 180K OHM 5% 0603 Specifications: Resistance (Ohms): 180K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXB-34V300JV : Resistor 30 Ohm 62.5mW 2 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 30 OHM 2 RES 0606 Specifications: Resistance (Ohms): 30 ; Tolerance: ±5% ; Power Per Element: 62.5mW ; Circuit Type: Isolated ; Number of Pins: 4 ; Packaging: Tape & Reel (TR) ; Number of Resistors: 2 ; Package / Case: 0606 (1616 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: ±200ppm/°C

ERJ-6ENF3741V : 3.74K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 3.74K OHM 1/8W 1% 0805 SMD Specifications: Resistance (Ohms): 3.74K ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ELF-18D290C : 400mA Common Mode Choke Filter - Power Line; 22MH V SERIES LINE FILTER Specifications: Inductance: 22mH ; Impedance: - ; DC Resistance (DCR): 1.707 Ohm ; Current: 400mA ; Filter Type: Power Line ; Mounting Type: Through Hole ; Package / Case: Vertical, 4 PC Pin ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EEHZC1V151P : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID

Same catergory

CA56-12SRWA : Material: Gaaias , Wavelength: 640nm. !0.56 INCH DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. ! EASY The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. s are subject to change without notice. N o. Dic D es Min.

GP1S55T : Transmissive Photointerrupter in a Case Type Package.

IL755-1 : . High Current Transfer Ratios, at IF=2.0 mA IF=1.0 mA BVCEO AC or Polarity Insensitive Inputs Built-In Reverse Polarity Input Protection Industry Standard DIP Package Underwriters Lab File #E52744 DVE VDE #0884 Available with Option 1 The IL/ILD755 are bidirectional input optically coupled isolators. They consist of two Gallium Arsenide infrared emitting.

LPI-C011701S-150G : Front Panel Indicator Light Transporters.

LYM676-NR : Hyper Mini Topled Hyper-bright Led. Gehäusefarbe: weiß als optischer Indikator einsetzbar zur Hinterleuchtung, Lichtleiter- und Linseneinkopplung für alle SMT-Bestück- und Löttechniken geeignet gegurtet (8-mm-Filmgurt) color of package: white for use as optical indicator for backlighting, optical coupling into light pipes and lenses suitable for all SMT assembly and soldering methods.

MS213A : 0.3 Dual Digit Numeric Displays.

SFH6702 : Low Input Current Logic Gate Optocoupler. Data Rate 5.0 MBits/s (2.5 MBit/s over Temperature) Buffer Isolation Test Voltage, 5300 VRMS for 1.0 s TTL, LSTTL and CMOS Compatible Internal Shield for Very High Common Mode Transient Immunity Wide Supply Voltage Range to 15 V) Low Input Current to 5.0 mA) Three State Output (SFH6700/19) Totem Pole Output (SFH6701/02/11/12) Open Collector Output (SFH6705).

SSL-LX305P4USBD : T-3mm Tapered Lens.

PS2513-1 : High-SpeedSwitching/High Isolation Voltage Photocoupler Series. HIGH-SPEED SWITCHING/HIGH ISOLATION VOLTAGE -NEPOC PHOTOCOUPLER SERIES The PS2513-1 and PS2513L-1 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The in a plastic DIP (Dual In-line Package) and the PS2513L-1 is lead bending type (Gull-wing) for surface mount. High isolation voltage (BV 5 000 Vr.m.s.).

PS2561-1-A : Transistor Output Optocouplers Hi-Iso Photo 1-Ch. s: Manufacturer: CEL ; Product Category: Transistor Output Optocouplers ; RoHS:  Details ; Maximum Collector Emitter Voltage: 80 V ; Maximum Collector Emitter Saturation Voltage: 0.3 V ; Isolation Voltage: 5000 Vrms ; Current Transfer Ratio: 400 % ; Maximum Forward Diode Voltage: 1.4 V ; Maximum.

CXA-L0605C-VJL : Inverters 4.75 ~ 5.25V; INVERTER 5V-INPUT 1600V-OUTPUT. s: Type: Inverters for CCFL and UV Lamps ; Voltage - Input: 4.75 ~ 5.25V ; Output: 1600V ; Size / Dimension: 3.76" L x 0.79" W x 0.31" H (95.5mm x 20mm x 8mm) ; Mounting Type: Chassis Mount ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LN518GA : 7-Segment Green 16-DIP 1 digit 0.80" (20.32mm) Display Modules - LED Character and Numeric; LED 0.8" 1 DIGIT GREEN DISPLAY C. s: Display Type: 7-Segment ; Color: Green ; Package / Case: 16-DIP ; Number of Digits/Alpha: 1 ; Size / Dimension: 1.09" x .788" (27.71mm x 20.02mm) ; Common Pin: Common Anode ; Digit/Alpha Size: 0.80" (20.32mm) ; Voltage - Forward.

AA1102W-TR : LEDs -; LED ORANGE CLEAR 1206 SMD. s: Color: Orange ; Lens Style/Size: (Inner Lens) Round with Domed Top ; Millicandela Rating: 9mcd ; Voltage - Forward (Vf) Typ: 2.2V ; Wavelength - Dominant: 606nm ; Wavelength - Peak: 605nm ; Current - Test: 20mA ; Viewing Angle: 77°, 87° ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: 1206.

67-21/B7C-AS2U1N/2T : LEDs -; LED TOPLED 2PLCC SMD. s: Color: Blue ; Lens Style/Size: Round with Flat Top, 2.4mm ; Millicandela Rating: 395mcd ; Voltage - Forward (Vf) Typ: 3.2V ; Wavelength - Dominant: 471nm ; Wavelength - Peak: 468nm ; Current - Test: 20mA ; Viewing Angle: 120° ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: 2-PLCC ; Mounting Type:.

LTL-4251T-R2 : LEDs -; LED W/INT RES 3MM 12V YELLOWDIFF. s: Color: Yellow ; Lens Style/Size: Round with Domed Top, 3mm, T-1 ; Millicandela Rating: 12.6mcd ; Voltage - Forward (Vf) Typ: 15V ; Wavelength - Dominant: 588nm ; Wavelength - Peak: 585nm ; Current - Test: 12mA ; Viewing Angle: 40° ; Lens Type: Diffused, Tinted ; Luminous Flux @ Current - Test: - ; Package.

FOD8321R2V : Transistor Output Optocouplers Dual 2A High-Speed Low-Side Gate Driver. Fairchild FOD83xx Optoplanar& 174; Gate Drive Optocouplers are advanced 2.5A output current gate drive optocouplers, capable of driving medium power IGBT/MOSFETs. These optocouplers employ Fairchild's patented coplanar packaging technology, Optoplanar& 174;, and optimized IC design.

SMTV01-Y27 : LED Light Pipes SMD Lightpipe ADPT Yellow 270mcd. Bivar SMTV01 Series Surface Mount Flexible Light Pipe Adapters provide a one-piece SMT solution to complete a 2mm flexible light pipe system. They feature an optimized design that  maximizes light transmission without light bleeding from the board to the front panel. The SMTV01 adapter a small.

 
0-C     D-L     M-R     S-Z