Details, datasheet, quote on part number: LN02102C68
PartLN02102C68
CategoryOptoelectronics => Display => LEDs => LED Lamps => Point-Lighting LEDs
TitlePoint-Lighting LEDs
DescriptionBrightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Minibright ;; Lighting Color = Green/orange ;; Lens Color = Clear ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LN02102C68 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
1: Anode (Orange) 2: Cathode 3: Anode (Green) 4: Cathode

s Electro-Optical Characteristics (Ta = 25C) Conventional Part No. LN02102C68 Unit Lighting Lens Color Green Clear Orange - IO Typ 1.5 3.0 mcd Min 0.75 1.00 mcd 10 mA Typ V VF Max V P Typ 630 nm Typ 10 mA Max 3 V



Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNG102C2J
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LN0401GP3 Outline (mm) = 15×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0402WP38 Outline (mm) = 15×5 ;; Lighting Color = Green ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN0603GP3 Outline (mm) = 20×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0801WP23 Outline (mm) = 15×12 ;; Lighting Color = Red ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN086WP38 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN117WP23 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.3×1.8 ;; Lighting Color = Red ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN11CP23 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 5.0 ;; Lighting Color = Red/green ;; Lens Color = Clear ;; Remarks = ;; Package =
LN11WP23
LN11WP34
LN11WP38
LN1251C Led Surface Mounting Chip Led
LN1251CALTR Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1251CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1261C Surface Mounting Chip Led
LN1261CALTR Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1261CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1271R Ln1261cal
LN1271RALTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1351C Led Surface Mounting Chip Led
LN1351CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1361CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =

2SA0683 : VCEO(V) = -25 ;; IC(A) = -1 ;; HFE(min) = 85 ;; HFE(max) = 340 ;; Package = TO-92L-A1

ECOS1JA392EA : Large Can Aluminum Electrolytic Capacitors

EEUEB1V221 : Aluminum Electrolytic Capacitor/eb

ECE-V1HS2R2SR : 2.2F Aluminum Capacitor Radial, Can - SMD 50V; CAP ALUM 2.2UF 50V 20% SMD Specifications: Capacitance: 2.2F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 1000 Hrs @ 85C ; Size / Dimension: 0.118" Dia (3.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.130" L x 0.130" W (3.30mm x 3.30mm) ; Mounting Type: Surface Mount ; Packa

FX-102-Z : Specifications: Type: Standard ; Sensing Range: - ; Fiber Optic Applications: -

ERJ-8ENF1103V : 110K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 110K OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 110K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-3EKF12R7V : 12.7 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 12.7 OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 12.7 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-12SF2613U : 261K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 261K OHM 3/4W 1% 2010 SMD Specifications: Resistance (Ohms): 261K ; Power (Watts): 0.75W, 3/4W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

ERT-J0EV104H : THERMISTOR NTC 100K OHM 3% 0402 -; THERMISTOR NTC 100K OHM 3% 0402 Specifications: Resistance in Ohms @ 25C: 100K ; B25/50: 4700K ; B25/85: 4750K ; B25/100: - ; B0/50: - ; Operating Temperature: -40C ~ 125C ; Resistance Tolerance: 3% ; B Value Tolerance: 2% ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EEVFK1H100M : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 50 V, 10 uF, SURFACE MOUNT Specifications: Configuration / Form Factor: Chip Capacitor ; Features: Polarized ; Capacitance Range: 10 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 50 volts ; Leakage Current: 5 microamps ; ESR: 880 milliohms ; Mounting Style: Surface Mount Technology ; Operating Temperature: -55 to 105 C (

ETU-5J100H : 1-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, 185 X 45 MM, 100 MM HEIGHT, PACKAGE ; Output Voltage: 5 volts ; Input Voltage: 98 to 132 volts ; Output Power: 50 watts (0.0670 HP)

Same catergory

APBA03-41SRWA : Material: Gaaias , Wavelength: 640nm. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. s are subject to change whitout notice. N o. Dic m A Min. APBA03-41SRWA SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED 765 7 Common Anode,Rt. Hand.

CW22P901 : Cw20p-type CW Tunable, Wavelength-stabilized Laser Module. Applications SONET/SDH extended-reach Long-haul, very dense, wave-division multiplexing (DWDM) High-speed data communication Flexible wavelength systems The CW20P-type laser modules are designed for use in transmission systems and high-speed data communication applications. The device supports 20 wavelengths. The module uses an RS-232 interface to adjust.

G5851-03 : . DATE RATING AND CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS PARAMETER Reverse Voltage Operating Temperature Storage Temperature SYMBOL VRMax Topr Tstg VALUE to +125 UNIT C (Ta=25C) HPK TYP. MAX. 1.1 5E+11 --REMARKS ELECTRICAL AND OPTICAL CHARACTERISTICS PARAMETER Spectral Response Range Peak Sensitive Wavelength Active Area Photo Sensitivity Detectivity.

HSH1000KS : Lamps For Photolithography. PerkinElmer Optoelectronics is a leading manufacturer of mercury short arc lamps ranging in output power from to 8000 watts. These lamps are used in the production of printed circuit boards, liquid crystal displays and semiconductors. The HSH Series lamps are used worldwide in microlithography systems manufactured by ASML, Canon, GCA, Nikon, Karl Suss,.

SSL-LX20R6SYD : T-22mm Dome, 2-Pin.

SSL-LX3044UWC : T-3mm Short Lens, Clear.

SSP-LXS1822S16A : 46mm (1.82") Square 4x4 Poly Leds, With Sixteen T8mm Lenses.

XLMR01DC : Material (Color) = GaAlAs(Red);; Lens = Red Diffused;; Peak Wave Length = 660;; Iv(ucd) If@10mA Min.= 200;; Iv(ucd) If@10mA Typ.= 290.

XZDMG05A : Material (Color) = GaP(Green);; Lens = ;; Peak Wave Length = 565;; Iv(ucd) If@10mA Min.= 1900;; Iv(ucd) If@10mA Typ.= 9800.

SG1201A : S FOR LCD MODULE SG1201A. 3375 Scott Blvd. Suite 222 Santa Clara CA 95054 Tel: 408-988-1101 Fax: 408-988-7626 Email: micro@microelect.com Http://www.microelect.com Number of Dots Built-in Controller IC Duty Cycle Options 12 characters x 1 line HD66730 or equivalent 1/16 Duty EL/LED Backlight, STN MECHANICAL PARAMETERS Module Size 8.8(12.7) mm Viewing Area Size 16.0H mm Active.

18602252 : LED Incandescent Replacements Yellow 12AC/DC Bayonet Based. s: Manufacturer: Chicago Miniature ; Product Category: LED Incandescent Replacements ; RoHS:  Details ; Illumination Color: Yellow ; Voltage Rating: 12 V ; Packaging: Bulk ; Factory Pack Quantity: 25.

EA EDIP240J-7LATP : LCD Graphic Display Modules & Accessories Amber/Black Contrast With Touch Screen. Electronic Assembly 's EA eDIP graphic displays are equipped with industry-leading integrated intelligence , a variety of integrated fonts, and a range of sophisticated graphics functions. These Electronic Assembly devices come ready to operate with an operating voltage.

OVM12F3B7 : LED Lighting Fixtures Blue, 470nm 3-LED Module. Optek LED module strips are a flexible and scalable lighting solution that provides fast response times and low power consumption that results in low power requirements from circuit power supplies. These Optek LED light strips are available in red, amber, green, and white and are available in three different.

LY 5436-VBW-1 : LEDs -; LED 5MM 587NM YELLOW NONDIFF RAD. s: Color: Yellow ; Lens Style/Size: Round with Domed Top, 5mm, T-1 3/4 ; Millicandela Rating: - ; Voltage - Forward (Vf) Typ: 2V ; Wavelength - Dominant: 587nm ; Wavelength - Peak: 591nm ; Current - Test: 20mA ; Viewing Angle: 40 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: Radial.

VLP-500-R : Optics - LEDs - Light Pipes Clear; LIGHT PIPE VERTICAL .500" ROUND. s: Color: Clear ; Mounting Type: Board Mount, Press Fit ; Lens Style/Size: Round with Domed Top, 3mm ; Configuration: Single.

803284 : LED Thermal Products; STRIP LED IMS LUMEX SML-LX. s: Type: Thermal Clad Board ; For Use With/Related Products: Lumex SML-LX ; Shape: Square ; Packaging: 17 Per Strip; 1 Strip per Pkg ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

104228-0210 : LED Mounting Hardware LED HLDR ASSY FOR SAMSUNG LC103B. Molex LED Array Holders for Samsung LEDs simplify field servicing of LED lighting applications. These push-button type LED array holders enable easy wire insertion and removal without the need for an extraction tool. These LED array holders incorporate a lever-actuated wire-trap contact design.

 
0-C     D-L     M-R     S-Z