Details, datasheet, quote on part number: LN0202GP3
PartLN0202GP3
CategoryOptoelectronics => Display => LEDs => LED Lamps => Surface Lighting LEDs
TitleSurface Lighting LEDs
DescriptionOutline (mm) = 15×5 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LN0202GP3 datasheet
Cross ref.Similar parts: LNV302102A
Quote
Find where to buy
 
  

 

Features, Applications

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
Lens Color Red Diffused Green Diffused Amber Diffused Red Diffused -


Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LN0202RP2
LN0202RP8
LN0202YP4
LNV202102A
LNV302102A
LNV402102A
LNV802102A
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LN0202RP2 Outline (mm) = 15×5 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0204RP2 Outline (mm) = 9×7 ;; Lighting Color = Red ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN02102C68 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Minibright ;; Lighting Color = Green/orange ;; Lens Color = Clear ;; Remarks = ;; Package =
LN0401GP3 Outline (mm) = 15×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0402WP38 Outline (mm) = 15×5 ;; Lighting Color = Green ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN0603GP3 Outline (mm) = 20×12 ;; Lighting Color = Green ;; Mono-color/bi-color = Mono-color ;; Remarks = ;; Package =
LN0801WP23 Outline (mm) = 15×12 ;; Lighting Color = Red ;; Mono-color/bi-color = Bi-color ;; Remarks = ;; Package =
LN086WP38 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Green/orange ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN117WP23 Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.3×1.8 ;; Lighting Color = Red ;; Lens Color = White Diffused ;; Remarks = ;; Package =
LN11CP23 Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 5.0 ;; Lighting Color = Red/green ;; Lens Color = Clear ;; Remarks = ;; Package =
LN11WP23
LN11WP34
LN11WP38
LN1251C Led Surface Mounting Chip Led
LN1251CALTR Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1251CTR Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1261C Surface Mounting Chip Led
LN1261CALTR Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LN1261CTR Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LN1271R Ln1261cal
LN1271RALTR Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =

LNG309MBG : Point-Lighting LEDs Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.0 ;; Lighting Color = Green ;; Lens Color = Green Clear ;; Remarks = ;; Package =

MAZ4150N-H : Silicon Planar Type

ECA-2AM3R3I : 3.3F Aluminum Capacitor Radial, Can 100V; CAP ALUM 3.3UF 100V 20% RADIAL Specifications: Capacitance: 3.3F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 85C ; Size / Dimension: 0.197" Dia (5.00mm) ; Lead Spacing: 0.098" (2.50mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Can

ECH-U1H183JX5 : 0.018F Film Capacitor 1210 (3225 Metric); CAP FILM 0.018UF 50VDC 1210 Specifications: Capacitance: 0.018F ; Tolerance: 2% ; Dielectric Material: Polyphenylene Sulphide (PPS) ; Package / Case: 1210 (3225 Metric) ; Packaging: Digi-Reel ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Mounting Type: Surface Mount ; Features: General Purpose ; Lead Free Stat

ECQ-V1H153JL5 : 0.015F Film Capacitor Radial; CAP FILM 0.015UF 50VDC RADIAL Specifications: Capacitance: 0.015F ; Tolerance: 5% ; Dielectric Material: Polyester, Metallized - Stacked ; Package / Case: Radial ; Packaging: Tape & Reel (TR) ; Lead Spacing: 0.197" (5.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ;

ECQ-V1J564JMW : 0.56F Film Capacitor Radial; CAP FILM 0.56UF 63VDC RADIAL Specifications: Capacitance: 0.56F ; Tolerance: 5% ; Dielectric Material: Polyester, Metallized - Stacked ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.197" (5.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ; Lead Free Status:

ERJ-2RKF1073X : 107K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 107K OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 107K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-6GEYJ751V : 750 Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 750 OHM 1/8W 5% 0805 SMD Specifications: Resistance (Ohms): 750 ; Power (Watts): 0.125W, 1/8W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S1TF6803U : 680K Ohm 1W Chip Resistor - Surface Mount; RES ANTI-SULFUR 680K OHM 1% 2512 Specifications: Resistance (Ohms): 680K ; Power (Watts): 1W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

UNR221D00L : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 100mA 50V 200mW NPN - Pre-Biased; TRANS NPN W/RES 30 HFE MINI 3P Specifications: Transistor Type: NPN - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 200mW ; Resistor - Base (R1) (Ohms): 47K ; Resistor - Emitter Base (R2) (Ohms): 10K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300A, 10mA ; Curre

Same catergory

6N135 : Photo-IC Output. Pin = 8 ;; Package = Dip ;; Data Rate (NRZ B/s) (typ.) = 1Mbit/s ;; CTR = 7% Min. ;; ISOlation Voltage BVS (Vrms) = 2500 ;; = Jedec Type ;; Additional Information =  .

BLF051MGC-28V-P : Material: Ingaalp , Wavelength: 568nm. The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. CURRENT, POWER SAVINGS. MAINTENANCE. COLOR AVAILABLE. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. s are subject to change without notice. ) V=28V Min. BLF051MGC-28V-P MEGA GREEN (InGaAlP).

CCM1622 : Character Display Module. Display Format = 16 X 2 ;; Model Size WXHXD (mm) = 84 X 44 X 9.3 ;; View Area = 64.5 X 13.8 ;; Character Size = 5 X 8 ;; Dot Size =   ;;.

MTL007 : Sxga Flat Panel Controller. GENERAL The MTL007 Flat Panel Display (FPD) Controller is a low-cost input format converter for TFT-LCD Monitor or LCD TV application which accepts 15-pin D-sub RGB graphic signals (through ADC), YUV signals from digital video decoder or digital RGB graphic signals from PanelLink TMDS receiver. It includes a RGB/YUV input processor, video scaling up processor,.

S6840 : Si-based Photodiodes. S6840 is designed for camera exposure meters. It consists a 5-element photodiode and an IC integrating a logarithmic amplifier circuit with gain switching and a thermosensor. Applications l 5-element photodiode (1 element in center, 4 elements at l Camera auto exposure meter l Clear plastic package 5.2 mm) l Low noise l Built-in thermosensor l Wide.

S6B0794X : BW STN. = S6B0794X 160SEG / Com Driver For Dot Matrix LCD ;; Segment/ Common = 160/160 ;; GRAM(Bits) = - ;; Interface = 4/8 ;; VDD(V) = 2.4~5.5 ;; VLCD (Max.V) = 32 ;; Built-in Power Circuit = - ;; DC/DC Convert (Times) = - ;; Package = Gold Bump/tcp ;; Production Status = Mass Production.

SFH310 : Silicon NPN Phototransistor. Wesentliche Merkmale Speziell geeignet fr Anwendungen im Bereich von 400 nm bis 1100 nm (SFH 310) und bei 880 nm (SFH 310 FA) Hohe Linearitt 3 mm-Plastikbauform Anwendungen Lichtschranken fr Gleich- und Wechsellichtbetrieb Industrieelektronik ,,Messen/Steuern/Regeln" Typ Type SFH 310 SFH 310-2/3 SFH 310 FA SFH 310 FA-2/3 Bestellnummer Ordering Code.

XMUG18C : Material (Color) = Gap (Green);; Lens = ;; Peak Wave Length = 565;; Iv(ucd) If@10mA Min.= 3000;; Iv(ucd) If@10mA Typ.= 7990.

XVT1LUY48D : Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 19.

SLR-332DU3F : Standard LED - Through Hole 3.2MM 610NM ORN DIFF. » » » LEDs - High Brightness - Leaded - Amber/Orange LEDs - High Brightness - Leaded - Amber/OrangeStandard Leaded LED components are often used in indication applications and generally have power levels s: Manufacturer: ROHM Semiconductor ; Product Category: Standard LED - Through.

VAOB-10GCDE2-C : Standard LED - Through Hole Yel/Grn Diffused 590/570nm 90/80mcd. VCC LEDs are designed around the parameters of VCC´s mounting hardware. The 3mm, 5mm, and 10mm LEDs complement VCC lens and cable sockets by mechanically aligning with the lens retaining mechanism for a secure panel mount fit. The VCC LED offerings are color matched with VCC lenses to provide.

556-1606-324F : LED , Panel Indicators, Pilot Lights; LED 1" FLAT GREEN 72VDC C1D2. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

SSF-LXH2300ID-5V-LM : LED , Round with Domed Top, 3mm 5V 30mA Red Through Hole, Right Angle; LED 3MM 5V RA MATING RED PC MNT. s: Color: Red ; Mounting Type: Through Hole, Right Angle ; Configuration: Single ; Voltage Rating: 5V ; Current: 30mA ; Lens Style/Size: Round with Domed Top, 3mm ; Packaging: Bulk ; Lens Type: Diffused, Tinted ; Lead Free Status: Lead Free ; RoHS.

SML-LX0603SUGW-TR : LEDs -; LED ALINGAP GRN WHT DIFF 0603SMD. s: Color: Green ; Lens Style/Size: Rectangle with Flat Top, 1mm x 0.8mm ; Millicandela Rating: 45mcd ; Voltage - Forward (Vf) Typ: 2.2V ; Wavelength - Dominant: - ; Wavelength - Peak: 574nm ; Current - Test: 20mA ; Viewing Angle: 140 ; Lens Type: Diffused, White ; Luminous Flux @ Current - Test: - ; Package.

SML-LX15GGC-TR : LEDs -; LED DUAL565NM G/G CLR REPL SOT23. s: Color: Green ; Lens Style/Size: Rectangle with Flat Top, 3mm x 2mm ; Millicandela Rating: 10mcd ; Voltage - Forward (Vf) Typ: 2.2V ; Wavelength - Dominant: - ; Wavelength - Peak: 565nm ; Current - Test: 20mA ; Viewing Angle: 140 ; Lens Type: Clear ; Luminous Flux @ Current - Test: - ; Package / Case: TO-236,.

LY W51M-HXJY-36-Z : LEDs - >75mA, High Brightness, Power Yellow; LED GOLDEN DRAGON 590NM YLW SMD. s: Color: Yellow ; Package / Case: 2-SMD, Gull Wing ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

LNJC36X8ARA1 : LEDs -; LED ICE BLUE HIGH BRIGHT ESS SMD. s: Color: Blue ; Lens Style/Size: Rectangle with Flat Top, 1.6mm x 0.8mm ; Millicandela Rating: 30mcd ; Voltage - Forward (Vf) Typ: 2.9V ; Wavelength - Dominant: - ; Wavelength - Peak: - ; Current - Test: 5mA ; Viewing Angle: - ; Lens Type: - ; Luminous Flux @ Current - Test: - ; Package / Case: 0603 (1608 Metric).

AA3021SYSK/J3-TR : Standard LEDs - SMD 3.0 X 2.0 MM YELLOW SMD LED. Kingbright HELI LEDs have a luminous output up to ~12,000mcd and up to 30% cost saving in comparison to packages with similar performance, this series is designed for high-volume and cost-sensitive applications. Using the latest AlGalnP and InGaN material, Kingbright HELI LEDs provide high-efficacy and excellent.

 
0-C     D-L     M-R     S-Z