|Category||Power Management => Supervisory Circuits => Microprocessor Supervisors|
|Description||6-Pin P Reset Circuit With Power-fail Comparator|
|Company||Maxim Integrated Products|
|Datasheet||Download MAX6342_UT-T datasheet
|Cross ref.||Similar parts: TPS6734, MAX6342SUT-T, TPS6734, MAX6342TUT-T, TPS6734, MAX6342ZUT-T|
The MAX6342MAX6345 family of microprocessor (µP) supervisory circuits monitors power supplies in digital systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components. The MAX6342MAX6345 provide factory-trimmed VCC reset threshold voltages from to 4.63V and operate with supply voltages between +1V and A +1.25V threshold detector allows for a power-fail warning, for low-battery detection, or for monitoring another power supply. The MAX6342 contains an MR input and an active-low push-pull reset. The MAX6343 and MAX6344 are identical to the MAX6342 except they provide an active-low, open-drain reset and an active-high, pushpull reset, respectively. The MAX6345 provides a second reset output in place of the MR input to give it an activehigh push-pull reset and an active-low push-pull reset. All of the devices are packaged in a miniature SOT23. o Small 6-Pin SOT23 Package o Precision Factory-Set VCC Reset Thresholds Between 2.33V and 4.63V o Guaranteed RESET Valid to VCC o 100ms min Reset Pulse Width o Debounced CMOS-Compatible Manual-Reset Input o Voltage Monitor for Power-Fail or Low-Battery WarningFeatures
Portable Computers Telecom Equipment Networking Equipment Portable/Battery-Powered Equipment Multivoltage Systems Embedded Control Systems
Note: The MAX6342MAX6345 are available with factory-set reset thresholds from to 4.63V (see Selector Guides 1, 2). Insert the letter corresponding to the desired nominal reset threshold into the blank following the part number. There a 2500 piece order increment required for the SOT package. SOT Top Marks table appears at end of data sheet.Typical Operating Circuit appears at end of data sheet.
PART MAX6344 MAX6345 PUSH-PULL RESET OUTPUT OPEN-DRAIN RESET OUTPUT PUSH-PULL RESET OUTPUT MANUAL-RESET INPUT 1
For free samples and the latest literature, visit www.maxim-ic.com or phone 1-800-998-8800. For small orders, phone 1-800-835-8769.
VCC to +6V RESET, RESET -0.3V to (VCC + 0.3V) RESET to +6V MR, PFI, PFO..............................................-0.3V to (VCC + 0.3V) Input Current, VCC..............................................................50mA Output Current, RESET, RESET..........................................50mA Continuous Power Dissipation (TA 6-Pin SOT23 (derate 4mW/°C above +70°C).............320mW Operating Temperature to +125°C Junction Temperature......................................................+150°C Storage Temperature to +150°C Lead Temperature Range (soldering, 10s)..................... +300°C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(VCC to +125°C, unless otherwise noted. Typical values are = +25°C and VCC = +3V.) (Note 1) PARAMETER Supply Voltage Range SYMBOL VCC to +125°C VCC to +85°C VCC +85°C No load VCC to +125°C VCC to +125°C VCC = VTH to (VTH - 100mV) VCC > 1.2V, ISINK = 100µA VCC > 2.7V, ISINK = 1.2mA VCC > 4.5V, ISINK = 3.2mA VCC > 1.2V, ISOURCE = 50µA VCC > 2.7V, ISOURCE 500µA (MAX6342/MAX6345 only) VCC > 4.5V, ISOURCE 800µA (MAX6342/MAX6345 only) CONDITIONS MIN TYP MAX VCC 0.8 VCC 0.8 VCC V UNITS VVCC to Reset Delay VOL RESET and RESET Outputs Drive Capability (Note 2) VOH
(VCC to +125°C, unless otherwise noted. Typical values are = +25°C and VCC = +3V.) (Note 1) PARAMETER Reset Timeout Period Open-Drain RESET Output Leakage Current (Note 3) MR Input Low MR Input High MR Pull-Up Resistance MR Minimum Pulse Width MR Glitch Rejection MR to Reset Delay PFI Input Threshold PFI Leakage Current (Note 3) PFO Output Voltage PFO Output Voltage PFO Output Short-Circuit Current PFI to PFO Delay VOL VOH to +125°C VCC = 4.5V, ISINK = 3.2mA VCC = 4.5V, ISOURCE = 800µA Output sink current Output source current VOVERDRIVE 15mV 0.8 VCC SYMBOL tRP ILKG VIL VIH 0.7 VCC CONDITIONS +125°C MAX6343 only, VCC > VTH(MAX) MIN 100 80 TYP 180 MAX VCC UNITS mA µs
Note 1: Overtemperature limits are guaranteed by design and not production tested. Note 2: Apply to each part in accordance with threshold voltage, output configuration, and manual reset status selected. Note 3: Leakage parameters are guaranteed by design and not production tested.
VCC 5V 25 SUPPLY CURRENT (µA) VCC 15 10 VCC 1V 1sec/div TEMPERATURE (°C) VCC 2.5V 1V/div RESET 0 RESET 1V/div
|Related products with the same datasheet|
|Some Part number from the same manufacture Maxim Integrated Products|
|MAX6342L 6-Pin P Reset Circuit With Power-fail Comparator|
|MAX6342thruMAX6345 6-pin up Reset Circuit With Power-fail Comparator|
|MAX6342TUT-T 6-Pin P Reset Circuit With Power-fail Comparator|
|MAX6346 3-Pin, Ultra-low-power SC70/SOT P Reset Circuits|
|MAX6346UR__-T 3-pin, Ultra-low-power Sc70/sot Reset Circuits|
|MAX6347 3-Pin, Ultra-low-power SC70/SOT P Reset Circuits|
MAX7231BFIQ : Triplexed LCD Decoder/drivers
MAX9061EBS+ : Ltra-Small, Low-Power Single Comparators In 4-Bump UCSP And 5-SOT23 The MAX9060–MAX9064 are small single comparators, ideal for a wide variety of portable electronics applications such as cell phones, media players, and notebooks that have extremely tight board space and power constraints. These co
MAX13362ATL/V+ : 24-Channel Automotive Switch Monitor The MAX13362 is a 24-channel automotive contact monitor designed as an interface between mechanical switches and low-voltage processors or other logic circuits. The IC operates over a voltage range of 5.5V to 28V, and withstands voltages up to 40V. It protects l
MAX6418UK30+T : Low-Power, Single/Dual-Voltage µP Reset Circuits With Capacitor-Adjustable Reset Timeout Delay The MAX6412–MAX6420 low-power microprocessor supervisor circuits monitor system voltages from 1.6V to 5V. These devices are designed to assert a reset signal whenever the VCC supply voltage or RESET IN fa
MAX2664/MAX2665 : Ultra-Small VHF and UHF LNAs Improve Receive Sensitivity for TV and FM-Enabled Phones The MAX2664 and MAX2665 are ultra-compact LNAs for VHF/UHF applications. These devices incorporate a broadband LNA with an integrated bypass switch. The MAX2664 covers the UHF frequency range from 470MHz to 860MHz, and the MAX2665 covers the VHF frequency range from 75MHz to 230MHz. Each device h
DS1249Y-70 : 2048k Nonvolatile SRAM The DS1249 2048k Nonvolatile (NV) SRAMs are 2,097,152-bit, fully static, nonvolatile SRAMs organized as 262,144 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When
MAX6386XS27D5 : SC70/µDFN, Single/Dual Low-Voltage, Low-Power µP Reset Circuits The MAX6381–MAX6390 microprocessor (µP) supervisory circuits monitor power-supply voltages from +1.8V to +5.0V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset ou
MAX4516ESA-T : 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO8 Specifications: Applications: Industrial ; Supply Voltage (VS): -5 to 6 volts ; Ron: 20 ohms ; tON: 100 ns ; tOFF: 75 ns ; VISO: 86 dB ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: SOIC, 0.150 INCH, SOIC-8 ; Number of Pins: 8 ; Number of Devices: 1