Details, datasheet, quote on part number: MAX6341C_A
PartMAX6341C_A
CategoryPower Management => Voltage References
Description1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References
CompanyMaxim Integrated Products
DatasheetDownload MAX6341C_A datasheet
Cross ref.Similar parts: MAX6341CSA, ADR434BR, MAX6341CSA, LM4140, MAX6341CSA, REF5040, MAX6341CSA, REF5040-EP, MAX6341CSA, REF5040A-Q1
  

 

Features, Applications

The MAX6325/MAX6341/MAX6350 are low-noise, precision voltage references with extremely low, 0.5ppm/C typical temperature coefficients and excellent, 0.02% initial accuracy. These devices feature buried-zener technology for lowest noise performance. Load-regulation specifications are guaranteed for source and sink currents to 15mA. Excellent line and load regulation and low output impedance at high frequencies make them ideal for high-resolution data-conversion systems to 16 bits. The MAX6325 is set for a 2.5V output, the MAX6341 is set for a 4.096V output, and the MAX6350 is set for a 5V output. All three provide for the option of external trimming and noise reduction.

o Ultra Low, 1ppm/C Max Tempco o Very Low, 1.5Vp-p Noise o 0.02% Initial Accuracy o 15mA Output Source and Sink Current o Low, 18mW Power Consumption (MAX6325) o Industry-Standard Pinout o Optional Noise Reduction and Voltage Trim o Excellent Transient Response 8-Pin SO Package Available o Low, 30ppm/1000hr Long-Term Stability o Stable for All Capacitive Loads

High-Resolution Analog-to-Digital and Digital-to-Analog Converters High-Accuracy Reference Standard High-Accuracy Industrial and Process Control Digital Voltmeters ATE Equipment Precision Current Sources

TEMP. RANGE to +125C PINPACKAGE 8 Plastic DIP SO 8 Plastic DIP SO 8 CERDIP MAX TEMPCO (ppm/C)

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

(Voltages Referenced to GND) to 40V OUT, to 6V OUT Short-Circuit to GND Duration (VIN 12V)..........Continuous OUT Short-Circuit to GND Duration (VIN 40V)........................5s OUT Short-Circuit to IN Duration (VIN 12V)..............Continuous Continuous Power Dissipation (TA +70C) 8-Pin Plastic DIP (derate 9.09mW/C above 8-Pin SO (derate 5.88mW/C above +70C)...................471mW 8-Pin CERDIP (derate 8.00mW/C above +70C)...........640mW Operating Temperature Ranges to +125C Storage Temperature to +150C Lead Temperature (soldering, 10s)...................................+300C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VIN = +10V, IOUT TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25C.) PARAMETER Input Voltage Range Output Voltage Output Voltage Temperature Coefficient (Note 1) SYMBOL VIN VOUT TCVOUT MAX6325E_A MAX6325MJA CONDITIONS +25C 8V VIN 10V Line Regulation (Note 2) VOUT/ VIN 10V VIN M +25C Sourcing: 0mA IOUT 15mA Load Regulation (Note 2) VOUT/ IOUT Sinking: -15mA IOUT 0mA Supply Current Trim-Adjustment Range Turn-On Settling Time Output Noise Voltage (Note 3) Temperature Hysteresis Long-Term Stability VOUT/t IIN VOUT tON en (Figure 0.01% of final value f 1kHz (Note M +25C MIN TYP MAX mV s Vp-p VRMS ppm ppm/ 1000hr ppm/mA ppm/V ppm/C UNITS V

(VIN = +10V, IOUT TA = TMIN to TMAX, unless otherwise noted. Typical values are = +25C.) PARAMETER Input Voltage Range Output Voltage Output Voltage Temperature Coefficient (Note 1) SYMBOL VIN VOUT TCVOUT MAX6341E_A MAX6341MJA CONDITIONS +25C 8V VIN 10V Line Regulation (Note 2) VOUT/ VIN 10V VIN M +25C Sourcing: 0mA IOUT 15mA Load Regulation (Note 2) VOUT/ IOUT Sinking: -15mA IOUT 0mA Supply Current Trim-Adjustment Range Turn-On Settling Time Output Noise Voltage (Note 3) Temperature Hysteresis Long-Term Stability VOUT/t IIN VOUT tON en (Figure 0.01% of final value f 1kHz (Note M +25C MIN TYP MAX mV s Vp-p VRMS ppm ppm/ 1000hr ppm/mA ppm/V ppm/C UNITS V


 

Related products with the same datasheet
MAX6325C
MAX6325CPA
MAX6325CSA
MAX6325E
MAX6325EPA
MAX6325ESA
MAX6325M
MAX6325MJA
MAX6341
MAX6341C
MAX6341CPA
Some Part number from the same manufacture Maxim Integrated Products
MAX6341CPA 1ppm/ C, Low-Noise, +2.5V/+4.096V/+5V Voltage References
MAX6342 6-Pin P Reset Circuit With Power-fail Comparator
MAX6342thruMAX6345 6-pin up Reset Circuit With Power-fail Comparator
MAX6342TUT-T 6-Pin P Reset Circuit With Power-fail Comparator
MAX6346 3-Pin, Ultra-low-power SC70/SOT P Reset Circuits
MAX6346UR__-T 3-pin, Ultra-low-power Sc70/sot Reset Circuits
MAX6347 3-Pin, Ultra-low-power SC70/SOT P Reset Circuits

ICL7660CUA : Switched-capacitor Voltage Converters

MAX280CWE : 5th Order, Zero DC Error, Lowpass Filter

MAX6225AEPA : Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage References

MAX873AEPA : Low-power, Low-drift, +2.5v/+5v/+10v Precision Voltage References

DS80C310-MCG+ : High-Speed Microcontroller The DS80C310 is a fast 80C31/80C32-compatible microcontroller. It features a redesigned processor core without wasted clock and memory cycles. As a result, it executes every 8051 instruction between 1.5x and 3x faster than the original architecture for the same crystal sp

MAX4373FEUA : Low-Cost, Micropower, High-Side Current-Sense Amplifier + Comparator + Reference ICs The MAX4373/MAX4374/MAX4375 low-cost, micropower, high-side current-sense supervisors contain a high-side current-sense amplifier, bandgap reference, and comparator with latching output. They feature a voltage outp

MAX6175BASA/V+ : High-Precision Voltage References With Temperature Sensor The MAX6173MAX6177 are low-noise, high-precision voltage references. The devices feature a proprietary temperature-coefficient curvature-correction circuit and laser-trimmed thin-film resistors that result in a very low 3ppm/C temperature

MAX643ACSA : 0.45 A SWITCHING REGULATOR, 50 kHz SWITCHING FREQ-MAX, UUC9 Specifications: Configuration / Function: Boost ; Package Type: Other, DIE-9 ; Life Cycle Stage: ACTIVE ; IOUT: 0.4500 amps ; VIN: 2 to 16.5 volts ; fsw: 50 kHz ; Operating Temperature: 0 to 70 C (32 to 158 F)

MAX6472TA20BD4-T : FIXED/ADJUSTABLE POSITIVE LDO REGULATOR, DSO8 Specifications: Regulator Type: Low Dropout ; Output Polarity: Positive ; Output Voltage Type: Fixed, Adjustable / Variable ; Package Type: Other, 3 X 3 MM, 0.80 MM HEIGHT, MO-229WEEC, TDFN-8 ; Life Cycle Stage: ACTIVE ; Output Voltage: 1.23 to 5 volts ; IOUT: 0.3000 amps

 
0-C     D-L     M-R     S-Z