Details, datasheet, quote on part number: MAX6318MHUK43DZ-T
PartMAX6318MHUK43DZ-T
CategoryPower Management => Supervisory Circuits => Microprocessor Supervisors
Description5-Pin P Supervisory Circuits With Watchdog And Manual Reset
The MAX6316MAX6322 family of microprocessor (P) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68HC11) reset outputs, along with watchdog and manual reset features. The Selector Guide below lists the specific functions available from each device. These devices are specifically designed to ignore fast negative transients on VCC. Resets are guaranteed valid for VCC down to 1V.

These devices are available in 26 factory-trimmed reset threshold voltages (from 2.5V to 5V, in 100mV increments), featuring four minimum power-on reset timeout periods (from 1ms to 1.12s), and four watchdog timeout periods (from 6.3ms to 25.6s). Thirteen standard versions are available with an order increment requirement of 2500 pieces (see Standard Versions table in the full data sheet); contact the factory for availability of other versions, which have an order increment requirement of 10,000 pieces.
CompanyMaxim Integrated Products
DatasheetDownload MAX6318MHUK43DZ-T datasheet
Quote
Find where to buy
 
  

 

Features, Applications

5-Pin P Supervisory Circuits with Watchdog and Manual Reset

The MAX6316MAX6322 family of microprocessor (P) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68HC11) reset outputs, along with watchdog and manual reset features. The Selector Guide below lists the specific functions available from each device. These devices are specifically designed to ignore fast negative transients on VCC. Resets are guaranteed valid for VCC down to 1V. These devices are available in 26 factory-trimmed reset threshold voltages (from in 100mV increments), featuring four minimum power-on reset timeout periods (from to 1.12s), and four watchdog timeout periods (from to 25.6s). Thirteen standard versions are available with an order increment requirement of 2500 pieces (see Standard Versions table); contact the factory for availability of other versions, which have an order increment requirement of 10,000 pieces. The MAX6316MAX6322 are offered in a miniature 5-pin SOT23 package.

Small 5-Pin SOT23 Package Available in 26 Reset Threshold Voltages in 100mV Increments Four Reset Timeout Periods or 1.12s (min) Four Watchdog Timeout Periods or 25.6s (typ) Four Reset Output Stages Active-High, Push/Pull Active-Low, Push/Pull Active-Low, Open-Drain Active-Low, Bidirectional Guaranteed Reset Valid to VCC = 1V Immune to Short Negative VCC Transients Low Cost No External Components

Portable Computers Controllers Intelligent Instruments Portable/Battery-Powered Equipment Embedded Control Systems

Devices are available in both leaded and lead-free packaging. Specify lead-free by replacing "-T" with "+T" when ordering. Ordering Information continued at end of data sheet. Typical Operating Circuit and Pin Configurations appear at end of data sheet.

PART MAX6321HP MAX6322HP WATCHDOG INPUT MANUAL RESET INPUT RESET OUTPUTS* ACTIVE-LOW PUSH/PULL ACTIVE-HIGH PUSH/PULL ACTIVE-LOW BIDIRECTIONAL ACTIVE-LOW OPEN-DRAIN

* The MAX6318/MAX6319/MAX6321/MAX6322 feature two types of reset output on each device.

For pricing, delivery, and ordering information, please contact Maxim Direct 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.

5-Pin P Supervisory Circuits with Watchdog and Manual Reset MAX6316MAX6322

Voltage (with respect to GND) to +6V RESET (MAX6320/MAX6321/MAX6322 only)...... to +6V All Other Pins.........................................-0.3V to (VCC + 0.3V) Input/Output Current, All Pins.............................................20mA Continuous Power Dissipation (TA +70C) SOT23-5 (derate 7.1mW/C above +70C)...............571mW Operating Temperature to +125C Junction Temperature......................................................+150C Storage Temperature to +160C Lead Temperature (soldering, 10s).................................+300C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

(VCC to +125C, unless otherwise noted. Typical values are = +25C.) (Note 1)

PARAMETER Operating Voltage Range SYMBOL VCC CONDITIONS MAX6316/MAX6317/MAX 6318/MAX6320/MAX6321 Supply Current ICC MAX6319/MAX6322: MR unconnected VCC = 5.5V VCC = 3.6V VCC = 5.5V VCC = 3.6V MIN MAX63_ _ A_-T Reset Active Timeout Period tRP MAX63_ _ B_-T MAX63_ _ C_-T MAX63_ _ D_-T VCC to RESET Delay tRD VCC falling at 1mV/s VCC 1.0V, ISINK = 50A VOL RESET Output Voltage VOH RESET Rise Time MAX6319LH) tR VOL RESET Output Voltage VOH VCC 1.2V, ISINK = 100A VCC 2.7V, ISINK = 1.2mA VCC 4.5V, ISINK = 3.2mA VCC 2.7V, ISOURCE = 500A VCC 4.5V, ISOURCE = 800A Rise time is measured from 90% of VCC; = 5pF, VCC = 3.3V (Note 3) VCC 2.7V, ISINK = 1.2mA VCC 4.5V, ISINK = 3.2mA VCC 1.8V, ISOURCE = 150A VCC 2.7V, ISOURCE = 500A VCC 4.5V, ISOURCE 0.8 x VCC 0.8 x VCC 0.8 x VCC V ns VTH - 1.5% VTH s ms VTH + 1.5% VTH + 2.5% TYP MAX ppm/C mV A UNITS V

Reset Threshold Temperature Coefficient Reset Threshold (Note 2) Reset Threshold Hysteresis

Note 1: Over-temperature limits are guaranteed by design, not production tested. Note 2: A factory-trimmed voltage divider programs the nominal reset threshold (VTH). Factory-trimmed reset thresholds are available in 100mV increments from to 5V (see Table 1 at end of data sheet). Note 3: Guaranteed by design. 2

(VCC to +125C, unless otherwise noted. Typical values are = +25C.) (Note 1)

PARAMETER Transitional Flip-Flop Setup Time RESET Output Rise Time (Note 5) Active Pullup Enable Threshold RESET Active Pullup Current RESET Pullup Resistance SYMBOL tS (Note 4) VCC = 120pF VCC = 200pF VCC = 250pF VCC = 400pF VPTH VCC = 5.0V VCC to +125C VCC > 1.0V, ISINK = 50A RESET Output Voltage VOL VCC > 1.2V, ISINK = 100A VCC > 2.7V, ISINK = 1.2mA VCC > 4.5V, ISINK = 3.2mA Open-Drain Reset Output Leakage Current ILKG A V CONDITIONS MIN TYP mA k MAX UNITS ns BIDIRECTIONAL RESET OUTPUT (MAX6316M/MAX6318MH/MAX6319MH)

WATCHDOG INPUT MAX63_ _ _W-T Watchdog Timeout Period tWD MAX63_ _ _X-T MAX63_ _ _Y-T MAX63_ _ _Z-T VIL 0.3 x VCC, VIH 0.7 x VCC (Note 6) WDI = VCC, time average VWDI = 0V, time average x VCC 0.7 x VCC V x VCC 0.7 x VCC V A

WDI Pulse Width WDI Input Threshold WDI Input Current (Note 7)

MANUAL RESET INPUT (MAX6316_/MAX6317H/MAX6319_H/MAX6320P/MAX6322HP) VIL MR Input Threshold VIH VIL VIH MR Input Pulse Width MR Glitch Rejection MR Pullup Resistance MR to Reset Delay VTH > 4.0V VTH to +125C

This is the minimum time RESET must be held low by an external pulldown source to set the active pullup flip-flop. Measured from RESET VOL (0.8 x VCC), RLOAD WDI is internally serviced within the watchdog period if WDI is left unconnected. The WDI input current is specified as the average input current when the WDI input is driven high or low. The WDI input is designed for a three-stated-output device with a 10A maximum leakage current and capable of driving a maximum capacitive load of 200pF. The three-state device must be able to source and sink at least 200A when active. 3


 

Related products with the same datasheet
MAX6316LUK26DY+T
MAX6316LUK25AY+T
MAX6316LUK29BX/V+T
MAX6316LUK29CY+
MAX6316LUK46CY+
MAX6316LUK25AW-T
MAX6316LUK25AX-T
MAX6316LUK25AY-T
MAX6316LUK25AZ-T
MAX6316LUK25BW-T
MAX6316LUK25BX-T
MAX6316LUK25BY-T
Some Part number from the same manufacture Maxim Integrated Products
MAX6318MHUK44AW-T 5-Pin P Supervisory Circuits With Watchdog And Manual ResetThe MAX6316MAX6322 family of microprocessor (P) supervisory circuits monitors power supplies and microprocessor activity in digital systems.

MAX6349ZL : Reset Circuits 150mA, SOT23, Low-dropout Linear Regulators With Internal Microprocessor Reset Circuit

MAX9507 : 1.8V, DirectDrive Video Filter Amplifier With Load Detection And Dual SPST Analog Switches The MAX9507 amplifies and filters standard-definition video signals and only consumes 5.8mW quiescent power and 11.7mW average power. The MAX9507 leverages Maxim\'s DirectDrive?? technology to generate a clea

DS3232SN : Extremely Accurate IC RTC With Integrated Crystal And SRAM The DS3232 is a low-cost temperature-compensated crystal oscillator (TCXO) with a very accurate, temperature-compensated, integrated real-time clock (RTC) and 236 bytes of battery-backed SRAM. Additionally, the DS3232 incorporates a batter

MAX6621_0709 : Peci-to-i2c Translator

MAX6684ESA+T : Pmic - Motor And Fan Controllers, Driver Integrated Circuit (ics) Tape & Reel (TR) - 3 V ~ 5.5 V; IC DETECTOR FAN FAIL 8-SOIC Specifications: Applications: Fan Controller ; Number of Outputs: 1 ; Voltage - Supply: 3 V ~ 5.5 V ; Voltage - Load: - ; Current - Output: - ; Operating Temperature: -40C ~ 85C ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Lead Free Status: Lead Free ; RoHS S

MAX3084EESA+T : 15kvesd-protected,fail-safe,high-speed (10mbps), Slew-rate-limited Rs-485/rs-422 Transceivers

DS1100Z-250+T : Clock/timing - Delay Line Integrated Circuit (ics) Tape & Reel (TR) 4.75 V ~ 5.25 V; DELAY LINE 5TAP 250NS MAX 8-SOIC Specifications: Delay to 1st Tap: 50ns ; Number of Taps/Steps: 5 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Available Total Delays: 250ns ; Number of Independent Delays: 1 ; Packaging: Tape & Reel (TR) ; Function: Nonprogrammable ; Voltage - Supply: 4.75 V ~ 5.25 V ; Tap Increment: 50ns ;

MAX15090BEWI+T : Hot Swap Voltage Controllers 2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output Maxim MAX15090B/MAX15090C Hot Swap ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. The devices integrate a hot-swap controller, 6m power MOSFET, and an electronic circuit-breaker protection in a single pa

 
0-C     D-L     M-R     S-Z