Details, datasheet, quote on part number: LTC1174-5
PartLTC1174-5
CategoryPower Management => Regulators => Switching Regulators => Inverting
TitleInverting
DescriptionLTC1174, 500mA, High Efficiency Step-down And Inverting DC/DC Converter
CompanyLinear Technology Corporation
DatasheetDownload LTC1174-5 datasheet
Quote
Find where to buy
 
  

 

Features, Applications
LTC1174 LTC1174-3.3/LTC1174-5 High Efficiency Step-Down and Inverting DC/DC Converter
FEATURES

High Efficiency: to 94% Peak Inductor Current Independent of Inductor Value Short-Circuit Protection Optimized for 5V Applications Wide VIN Range: to 18.5V Low Dropout Operation Low-Battery Detector Pin Selectable Current Limit Internal 0.9 Power Switch: VIN = 9V Only Four External Components Required 130A Standby Current Active Low Micropower Shutdown

The is a simple current mode DC/DC converter ideally suited for 5V operation. With an internal 0.9 switch (at a supply voltage of 9V), the LTC1174 requires only four external components to construct a complete high efficiency DC/DC converter. Under a no load condition the LTC1174 draws only 130A. In shutdown, it draws a mere 1A making this converter ideal for current sensitive applications. In dropout, the internal P-channel MOSFET switch is turned on continuously allowing the user to maximize the life of the battery source. The maximum inductor current of the LTC1174 family is pin selectable to either or 600mA, optimizing efficiency for a wide range of applications. Operation to 200kHz permits the use of small surface mount inductors and capacitors. For applications requiring higher output current or ultrahigh efficiency, see the LTC1148 data sheet.

and LTC are registered trademarks and is a trademark of Linear Technology Corporation.

Distributed Power Systems Step-Down Converters Inverting Converters Memory Backup Supply Portable Instruments Battery-Powered Equipment

(Voltage Referred to GND Pin) Input Supply Voltage (Pin to 18.5V Switch Current (Pin 5).............................................. 1A Switch Voltage (Pin 5) LTC1174................................................. VIN 13.5V LTC1174HV............................................ VIN 18.5V

TOP VIEW VOUT (VFB*) 1 LBOUT 2 LBIN 3 GND 4 N8 PACKAGE 8-LEAD PDIP * ADJUSTABLE OUTPUT VERSION TJMAX = 110C/W SHUTDOWN IPGM VIN SW

SYMBOL PARAMETER IFB VFB VOUT Feedback Current Feedback Voltage Regulated Output Voltage Output Voltage Line Regulation Output Voltage Load Regulation CONDITIONS

The q denotes specifications which apply over the full operating temperature range, otherwise specifications are = 25C. VIN = 9V, VSHUTDOWN = VIN, IPGM = 0V, unless otherwise noted.

LTC1174-3.3/LTC1174HV-3.3 LTC1174-5/LTC1174V-5 VIN to 12V, ILOAD = 100mA, IPGM = VIN (Note 3) LTC1174-3.3 (Note 20mA < ILOAD < 175mA, IPGM 20mA < ILOAD < 400mA, IPGM = VIN LTC1174-5 (Note 20mA < ILOAD < 175mA, IPGM 20mA < ILOAD < 400mA, IPGM = VIN

Operating Temperature Range to 85C Junction Temperature (Note 2)............................ 125C Storage Temperature Range................ to 150C Lead Temperature (Soldering, 10 sec)................. 300C

TOP VIEW VOUT (VFB*) 1 LBOUT 2 LBIN 3 GND SHUTDOWN IPGM VIN SW
SYMBOL PARAMETER IQ Input DC Supply Current (Note 4)

The q denotes specifications which apply over the full operating temperature range, otherwise specifications are = 25C. VIN = 9V, VSHUTDOWN = VIN, IPGM = 0V, unless otherwise noted.

CONDITIONS Active Mode 4V < VIN < 12V, IPGM 4V < VIN < 16V, IPGM = 0V Sleep Mode 4V < VIN 4V < VIN < 16V SHUTDOWN (Note 4) LTC1174: VSHUTDOWN 4V < VIN 12V LTC1174HV: VSHUTDOWN 4V < VIN < 16V MIN TYP MAX UNITS V A

VLBTRIP ILBIN ILBOUT VHYST IPEAK RON tOFF VIH VIL IIH IIL

Low-Battery Trip Point Current into Pin 3 Current Sunk by Pin 2 Comparator Hysteresis Current Limit ON Resistance of Switch Off-Time (Note 6) SHUTDOWN Pin High SHUTDOWN Pin Low SHUTDOWN Pin Input Current SHUTDOWN Pin Input Current

LTC1174: VLBOUT 0.4V LTC1174HV: VLBOUT 0.4V LTC1174/LTC1174HV IPGM = VIN, VOUT = 0V IPGM = 0V, VOUT LTC1174 LTC1174HV VOUT at Regulated Value Minimum Voltage at Pin 8 for Device to Be Active Maximum Voltage at Pin 8 for Device Be in Shutdown LTC1174: VSHUTDOWN 12V LTC1174HV: VSHUTDOWN 16V 0 VSHUTDOWN 0.8V

The q denotes specifications which apply over the full operating temperature range, otherwise specifications are 85C. LTC1174I and LTC1174HVI Only.

SYMBOL PARAMETER VFB Feedback Voltage ILBOUT Current Sunk by Pin 2 IPEAK Current Limit CONDITIONS LTC1174I/LTC1174HVI VLBOUT 0.4V (LTC1174I) VLBOUT 0.4V (LTC1174HVI) IPGM = VIN, VOUT 0V (LTC1174I) IPGM = 0V, VOUT 0V (LTC1174I) IPGM = VIN, VOUT 0V (LTC1174HVI) IPGM = 0V, VOUT 0V (LTC1174HVI) VOUT at Regulated Value (LTC1174I) VOUT at Regulated Value (LTC1174HVI) LTC1174I/LTC1174HVI

Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note TJ is calculated from the ambient temperature TA and power dissipation PD according to the following formulas: TA + (PD TA + (PD 150C/W)

Note 3: Guaranteed by design. Note 4: Dynamic supply current is higher due to the gate charge being delivered at the switching frequency. Note 5: Current into Pin 6 only, measured without electrolytic input capacitor. Note 6: The off-time is wafer-sort trimmed.


 

Related products with the same datasheet
LTC1174-3.3
LTC1174CN8
LTC1174CN8-3.3
LTC1174CN8-5
LTC1174CS8
LTC1174CS8-3.3
LTC1174CS8-5
LTC1174HV
LTC1174HV-3.3
LTC1174HV-5
LTC1174HVCN8
Some Part number from the same manufacture Linear Technology Corporation
LTC1174CN8 LTC1174, 500mA, High Efficiency Step-down And Inverting DC/DC Converter
LTC1177-12 ISOlated MOSFET Drivers
LTC1177IS-12
LTC1177ISW-12
LTC1196 8-Bit, SO-8, 1MSPS ADCs With Auto-shutdown Options
LTC1196-1AC 8-bit, So-8, 1msps ADCs With Auto-shutdown Options
LTC1196-1ACS8 8-Bit, SO-8, 1MSPS ADCs With Auto-shutdown Options
LTC1196-1BC 8-bit, So-8, 1msps ADCs With Auto-shutdown Options
LTC1196-1BCS8 8-Bit, SO-8, 1MSPS ADCs With Auto-shutdown Options
LTC1196-2AC 8-bit, So-8, 1msps ADCs With Auto-shutdown Options
LTC1196-2ACS8 8-Bit, SO-8, 1MSPS ADCs With Auto-shutdown Options
LTC1196-2BC 8-bit, So-8, 1msps ADCs With Auto-shutdown Options
LTC1196-2BCS8 8-Bit, SO-8, 1MSPS ADCs With Auto-shutdown Options
LTC11963Vto5V LTC1196 3V to 5V, 1Msps, SO-8, Serial Interface
LTC1197 10-Bit, 500ksps ADCs in Msop With Auto Shutdown
LTC11975V LTC1197 5V, 500ksps, SO-8, Serial Interface
LTC1197C 10-bit, 500ksps ADCs in Msop With Auto Shutdown
LTC1197CMS8 10-Bit, 500ksps ADCs in Msop With Auto Shutdown
LTC1197EMS8
LTC1197I 10-bit, 500ksps ADCs in Msop With Auto Shutdown
LTC1197IMS8 10-Bit, 500ksps ADCs in Msop With Auto Shutdown

LT1767EMS8E-5 : Step-Down LT1767, 1.25MHz, Monolithic 1.5A, Step-down Switching Regulator in Msop

LTC1450LCN : Voltage Output LTC1450, 5V, 0.5LSB Dnl, Micropower, Parallel, Reference, SSOP-24

LTC1605-1CG : Single Input LTC1605-1, 5V, 100ksps, 0V to 4V Input, Parallel Interface

LTC1929-PG : Step-Up/Step-Down 2-Phase, High Efficiency,synchronous Step-downswitching Regulators

LTC3565 : 1.25A, 4MHz, Synchronous Step-Down DC/DC Converter The LTC3565 is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input voltage range and has a user configurable operating frequency up to 4MHz, allowing the use of

LTC3609IWKG#PBF : 32V, 6A Monolithic Synchronous Step-Down DC/DC Converter The LTC3609 is a high efficiency, monolithic synchronous step-down DC/DC converter that can deliver up to 6A output current from a 4V to 32V (36V maximum) input supply. It uses a valley current control architecture to deliver very low duty cy

LTC4252A-2CMS : Negative Voltage Hot Swap Controllers The LTC®4252 negative voltage Hot SwapTM controller allows a board to be safely inserted and removed from a live backplane. Output current is controlled by three stages of current limiting: a timed circuit breaker, active current limiting and a fast feedforwar

LT5534ESC6#TRM : Rf Detector Rf/if And Rfid; IC DETECTOR RF PWR 3GHZ SC70-6 Specifications: RF Type: Broadcast Television ; Package / Case: 6-TSSOP, SC-88, SOT-363 ; Frequency: 50MHz ~ 3GHz ; Packaging: Tape & Reel (TR) ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

LTC6908IS6-1#TRMPBF : Resistor Set Sot-23 Oscillator with Spread Spectrum Modulation

LT1034CS8-1.2PBF : 2-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.225 V, PDSO8 Specifications: Package Type: SO-8, Other, 0.150 INCH, PLASTIC, SO-8 ; VREF: 1.2 to 1.24 volts ; TC: 40 ppm/C ; Operating Temperature: 0 to 70 C (32 to 158 F)

LTC2366HTS8#TRMPBF : 1-CH 12-BIT PROPRIETARY METHOD ADC, SERIAL ACCESS, PDSO6 Specifications: Package Type: LEAD FREE, MO-193, PLASTIC, TSOT-23, 6 PIN ; Screening Level: AUTOMOTIVE ; Pins: 6 ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Sample Rate: 3000 kSamples/Sec ; Input Voltage: -0.0500 to 3.65 volts

LTC2629CGN-1 : SERIAL INPUT LOADING, 7 us SETTLING TIME, 12-BIT DAC, PDSO16 Specifications: Package Type: SSOP, LEAD FREE, PLASTIC, SSOP-16 ; Screening Level: Commercial ; Pins: 16 ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

 
0-C     D-L     M-R     S-Z