Details, datasheet, quote on part number: LTC1164-5MJ
PartLTC1164-5MJ
CategoryAnalog & Mixed-Signal Processing => Filters
DescriptionLow Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
CompanyLinear Technology Corporation
DatasheetDownload LTC1164-5MJ datasheet
Quote
Find where to buy
 
  

 

Features, Applications
LTC1164-5 Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter DESCRIPTIO

The is a monolithic 8th order filter; it approximates either a Butterworth or a Bessel lowpass response. The LTC1164-5 features clock-tunable cutoff frequency and low power consumption (4.5mA with ± 5V supplies and 2.5mA with single 5V supply). Low power operation is achieved without compromising noise or distortion performance. With ± 5V supplies and 10kHz cutoff frequency, the operating signal-to-noise ratio is 86dB and the THD throughout the passband is 0.015%. Under the same conditions, a 77dB signal-tonoise ratio and distortion is obtained with a single 5V supply while the clock feedthrough is kept below the noise level. The maximum signal-to-noise ratio is 92dB. The LTC1164-5 approximates an 8th order Butterworth response with a clock-to-cutoff frequency ratio of 100:1 (Pin or 50:1 double-sampled (Pin V + and Pin 1 shorted to Pin 13). Double-sampling allows the input signal frequency to reach the clock frequency before any aliasing occurrence. An 8th order Bessel response can also be approximated with a clock-to-cutoff frequency ratio of 140:1 (Pin 10 to ground). With ± 7.5V supply, ± 5V supply and single 5V supply, the maximum clock frequency of the 1.5MHz, 1MHz, and 1MHz respectively. The LTC1164-5 is pin-compatible with the LTC1064-2 and LTC-1064-3.

FEATURES

Pin Selectable Butterworth or Bessel Response 4mA Supply Current with ± 5V Supplies fCUTOFF 20kHz 100µVRMS Wideband Noise THD ± 7.5V, VIN = 2VRMS) Operates with a Single 5V Supply (1VRMS Input Range) 60µVRMS Clock Feedthrough (Single 5V Supply) Operates ± 8V Supplies TTL/CMOS-Compatible Clock Input No External Components

Anti-Aliasing Filters Battery-Operated Instruments Telecommunications Filters Smoothing Filters

WIDEBAND NOISE = 110µVRMS THD IN PASSBAND 0.02% AT VIN = 2VRMS NOTE: THE CONNECTION FROM PIN 7 TO PIN 14 SHOULD BE MADE UNDER THE PACKAGE. FOR 50:1 OPERATION CONNECT PIN 1 TO PIN 13 AS SHOWN. FOR OR 150:1 OPERATION PINS 1 AND 13 SHOULD FLOAT. THE POWER SUPPLIES SHOULD BE BYPASSED A 0.1µF CAPACITOR AS CLOSE TO THE PACKAGE AS POSSIBLE.

Total Supply Voltage V 16V Input Voltage (Note ­ 0.3V) Output Short Circuit Duration......................... Indefinite Power Dissipation............................................. 400mW Burn-In Voltage...................................................... 16V

= 10k, fCLK TA = Operating Temperature Range, unless otherwise specified.

PARAMETER Passband Gain at 0.25fCUTOFF (Note 3) Gain at 0.50fCUTOFF (Note 3) Gain at 0.90fCUTOFF (Note 3) Gain at 0.95fCUTOFF (Note 3) Gain at fCUTOFF (Note 3) Gain at 1.44fCUTOFF (Note 3) Gain at 2.0fCUTOFF (Note 3) Gain with fCLK = 20kHz (Note 3) Gain with = 2.375V (Note 3) Input Frequency Range CONDITIONS fIN = 1kHz, (fCLK/fC) = 100:1 fIN = 1kHz, (fCLK/fC) = 50:1 fIN = 2kHz, (fCLK/fC) = 100:1 fIN = 4kHz, (fCLK/fC) = 50:1 fIN = 3.6kHz, (fCLK/fC) = 100:1 fIN = 3.8kHz, (fCLK/fC) = 100:1 fIN = 4kHz, (fCLK/fC) = 100:1 fIN = 8kHz, (fCLK/fC) = 50:1 fIN = 5.76kHz, (fCLK/fC) = 100:1 fIN = 8kHz, (fCLK/fC) = 100:1 fIN = 200Hz, (fCLK/fC) = 100:1 fIN = 400kHz, fIN = 2kHz, (fCLK/fC) = 100:1 fIN = 400kHz, fIN = 4kHz, (fCLK/fC) = 100:1 (fCLK/fC) = 100:1 (fCLK/fC) = 50:1

Operating Temperature Range to 125°C Storage Temperature Range................ to 150°C Lead Temperature (Soldering, 10 sec)................. 300°C

TOP VIEW 50:1 MODE 1 VIN 2 GND V+ 4 GND LP6 7 CONNECT 8 S PACKAGE 16-LEAD PLASTIC SW TJMAX 85°C/W 16 CONNECT 15 50:1 MODE NC 12 CLK 11 BUTT/BESS NC 9 VOUT

= 10k, fCLK TA = Operating Temperature Range, unless otherwise specified.

PARAMETER Maximum fCLK CONDITIONS VS = Single 5V (GND = 2V) Input at GND, f = fCLK, Square Wave ± 5V, (fCLK/fC) ± 5V, (fCLK/fC) = 50:1 Input at GND, f < fCLK ± 5V, (fCLK/fC) ± 5V, (fCLK/fC) ± 5V, (fCLK/fC) ± 5V, (fCLK/fC) TA 25°C

Output DC Offset Output DC Offset TempCo Power Supply Current

Power Supply Range The q denotes specifications which apply over the full operating temperature range. Note 1: Absolute Maximum Ratings are those values beyond which life of the device may be impaired.

Note 2: Connecting any pin to voltages greater than + or less than V ­ may cause latchup. It is recommended that no sources operating from external supplies be applied prior to power-up of the LTC1164-5. Note 3: All gains are measured relative to passband gain. The filter cutoff frequency is abbreviated as fCUTOFF or fC.

C A. fCLK = 100kHz fCUTOFF 1kHz (100:1, PIN V B. fCLK = 375kHz fCUTOFF 2.68kHz (140:1, PIN 10 GND) C. fCLK = 500kHz fCUTOFF 10kHz (50:1, PIN TO V PINS 1-13 SHORTED)


 

Related products with the same datasheet
LTC1164-5CJ
LTC1164-5CS
LTC1164-5M
LTC1164-6C
LTC1164-6CJ
LTC1164-6CS
LTC1164-6M
LTC1164-6MJ
LTC1164-7C
LTC1164-7CJ
LTC1164-7CS
Some Part number from the same manufacture Linear Technology Corporation
LTC1164-6 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-6C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-7C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-7CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-7M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-8 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-8CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-XX LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164AC Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164ACJ LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164ACS Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164ACSW LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164AM Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164AMJ LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter

LT1761ES5-2 : LT1761, 100mA, Low Noise, Low Dropout Micropower Regulator in SOT-23

LTC2232 : 10-Bit,105Msps/80Msps ADCsthe LTC 2232 And LTC2233 Are 105Msps/80Msps, Sampling 10-bit A/D Converters Designed For Digitizing High Frequency, Wide Dynamic Range Signals. The LTC2232/ LTC2233 Are Perfect For Demanding Communications Applications With ac Performance That Includes 61dB SNR And 75

LT3990EDD#TRPBF : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) No 1.21 V ~ 25 V; IC BUCK ADJ 0.35A 10DFN Specifications: Type: Step-Down (Buck) ; Output Type: Adjustable ; PWM Type: Current Mode, Hybrid ; Synchronous Rectifier: No ; Number of Outputs: 1 ; Voltage - Output: 1.21 V ~ 25 V ; Current - Output: 350mA ; Frequency - Switching: 210kHz ~ 2.3MHz ; Voltage - Input: 4.2 V ~ 62 V ; Lead Free Status

LTC1872BES6#TR : Constant Frequency Current Mode Step-up DC/DC Controller in Thinsot

LTC4156IUFD#TRPBF : Dual-Input Power Manager/ 3.5A LiFePO4 Battery Charger With I2C Control And USB OTG The LTC®4156 is a 15 watt I2C controlled power manager with PowerPathÂ(TM) instant-on operation, high efficiency switching battery charging and USB compatibility. The LTC4156 seamlessly manages power distribution f

LT1007CS8#TR : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Tape & Reel (TR) - ±4 V ~ 18 V; IC OP AMP PREC SGL HI SPD 8SOIC Specifications: Packaging: Tape & Reel (TR) ; Amplifier Type: General Purpose ; Number of Circuits: 1 ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Slew Rate: 2.5 V/µs ; Gain Bandwidth Product: 8MHz ; Current - Supply: - ; Current - Output / Channel: - ; Voltage - Supply, Single/Dual (±): ±4

LT3467IS6#TRMPBF : 2.5 A SWITCHING REGULATOR, 1600 kHz SWITCHING FREQ-MAX, PDSO6 Specifications: Configuration / Function: Boost ; Package Type: SOT23, Other, 1 MM HEIGHT, PLASTIC, MO-193, TSOT-23, 6 PIN ; Life Cycle Stage: ACTIVE ; IOUT: 2.5 amps ; VIN: 3 volts ; fsw: 1600 kHz ; Operating Temperature: -40 to 125 C (-40 to 257 F)

LTC2631AITS8-LM8#TRPBF : SERIAL INPUT LOADING, 4.2 us SETTLING TIME, 10-BIT DAC, PDSO8 Specifications: Package Type: LEAD FREE, PLASTIC, MO-193, TSOT-23, 8 PIN ; Screening Level: Commercial ; Pins: 8 ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

LTC3410ESC6-1.875#TRMPBF : 0.63 A SWITCHING REGULATOR, 2700 kHz SWITCHING FREQ-MAX, PDSO6 Specifications: Configuration / Function: Buck ; Package Type: SC-70, Other, LEAD FREE, PLASTIC, MO-203AB, SC-70, 6 PIN ; Life Cycle Stage: ACTIVE ; IOUT: 0.6300 amps ; VIN: 3.6 volts ; fsw: 2700 kHz ; Operating Temperature: 0 to 85 C (32 to 185 F)

 
0-C     D-L     M-R     S-Z