Details, datasheet, quote on part number: LTC1164-5M
PartLTC1164-5M
CategoryAnalog & Mixed-Signal Processing => Filters
DescriptionLow Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
CompanyLinear Technology Corporation
DatasheetDownload LTC1164-5M datasheet
Quote
Find where to buy
 
  

 

Features, Applications
LTC1164-5 Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter DESCRIPTIO

The is a monolithic 8th order filter; it approximates either a Butterworth or a Bessel lowpass response. The LTC1164-5 features clock-tunable cutoff frequency and low power consumption (4.5mA with 5V supplies and 2.5mA with single 5V supply). Low power operation is achieved without compromising noise or distortion performance. With 5V supplies and 10kHz cutoff frequency, the operating signal-to-noise ratio is 86dB and the THD throughout the passband is 0.015%. Under the same conditions, a 77dB signal-tonoise ratio and distortion is obtained with a single 5V supply while the clock feedthrough is kept below the noise level. The maximum signal-to-noise ratio is 92dB. The LTC1164-5 approximates an 8th order Butterworth response with a clock-to-cutoff frequency ratio of 100:1 (Pin or 50:1 double-sampled (Pin V + and Pin 1 shorted to Pin 13). Double-sampling allows the input signal frequency to reach the clock frequency before any aliasing occurrence. An 8th order Bessel response can also be approximated with a clock-to-cutoff frequency ratio of 140:1 (Pin 10 to ground). With 7.5V supply, 5V supply and single 5V supply, the maximum clock frequency of the 1.5MHz, 1MHz, and 1MHz respectively. The LTC1164-5 is pin-compatible with the LTC1064-2 and LTC-1064-3.

FEATURES

Pin Selectable Butterworth or Bessel Response 4mA Supply Current with 5V Supplies fCUTOFF 20kHz 100VRMS Wideband Noise THD 7.5V, VIN = 2VRMS) Operates with a Single 5V Supply (1VRMS Input Range) 60VRMS Clock Feedthrough (Single 5V Supply) Operates 8V Supplies TTL/CMOS-Compatible Clock Input No External Components

Anti-Aliasing Filters Battery-Operated Instruments Telecommunications Filters Smoothing Filters

WIDEBAND NOISE = 110VRMS THD IN PASSBAND 0.02% AT VIN = 2VRMS NOTE: THE CONNECTION FROM PIN 7 TO PIN 14 SHOULD BE MADE UNDER THE PACKAGE. FOR 50:1 OPERATION CONNECT PIN 1 TO PIN 13 AS SHOWN. FOR OR 150:1 OPERATION PINS 1 AND 13 SHOULD FLOAT. THE POWER SUPPLIES SHOULD BE BYPASSED A 0.1F CAPACITOR AS CLOSE TO THE PACKAGE AS POSSIBLE.

Total Supply Voltage V 16V Input Voltage (Note 0.3V) Output Short Circuit Duration......................... Indefinite Power Dissipation............................................. 400mW Burn-In Voltage...................................................... 16V

= 10k, fCLK TA = Operating Temperature Range, unless otherwise specified.

PARAMETER Passband Gain at 0.25fCUTOFF (Note 3) Gain at 0.50fCUTOFF (Note 3) Gain at 0.90fCUTOFF (Note 3) Gain at 0.95fCUTOFF (Note 3) Gain at fCUTOFF (Note 3) Gain at 1.44fCUTOFF (Note 3) Gain at 2.0fCUTOFF (Note 3) Gain with fCLK = 20kHz (Note 3) Gain with = 2.375V (Note 3) Input Frequency Range CONDITIONS fIN = 1kHz, (fCLK/fC) = 100:1 fIN = 1kHz, (fCLK/fC) = 50:1 fIN = 2kHz, (fCLK/fC) = 100:1 fIN = 4kHz, (fCLK/fC) = 50:1 fIN = 3.6kHz, (fCLK/fC) = 100:1 fIN = 3.8kHz, (fCLK/fC) = 100:1 fIN = 4kHz, (fCLK/fC) = 100:1 fIN = 8kHz, (fCLK/fC) = 50:1 fIN = 5.76kHz, (fCLK/fC) = 100:1 fIN = 8kHz, (fCLK/fC) = 100:1 fIN = 200Hz, (fCLK/fC) = 100:1 fIN = 400kHz, fIN = 2kHz, (fCLK/fC) = 100:1 fIN = 400kHz, fIN = 4kHz, (fCLK/fC) = 100:1 (fCLK/fC) = 100:1 (fCLK/fC) = 50:1

Operating Temperature Range to 125C Storage Temperature Range................ to 150C Lead Temperature (Soldering, 10 sec)................. 300C

TOP VIEW 50:1 MODE 1 VIN 2 GND V+ 4 GND LP6 7 CONNECT 8 S PACKAGE 16-LEAD PLASTIC SW TJMAX 85C/W 16 CONNECT 15 50:1 MODE NC 12 CLK 11 BUTT/BESS NC 9 VOUT

= 10k, fCLK TA = Operating Temperature Range, unless otherwise specified.

PARAMETER Maximum fCLK CONDITIONS VS = Single 5V (GND = 2V) Input at GND, f = fCLK, Square Wave 5V, (fCLK/fC) 5V, (fCLK/fC) = 50:1 Input at GND, f < fCLK 5V, (fCLK/fC) 5V, (fCLK/fC) 5V, (fCLK/fC) 5V, (fCLK/fC) TA 25C

Output DC Offset Output DC Offset TempCo Power Supply Current

Power Supply Range The q denotes specifications which apply over the full operating temperature range. Note 1: Absolute Maximum Ratings are those values beyond which life of the device may be impaired.

Note 2: Connecting any pin to voltages greater than + or less than V may cause latchup. It is recommended that no sources operating from external supplies be applied prior to power-up of the LTC1164-5. Note 3: All gains are measured relative to passband gain. The filter cutoff frequency is abbreviated as fCUTOFF or fC.

C A. fCLK = 100kHz fCUTOFF 1kHz (100:1, PIN V B. fCLK = 375kHz fCUTOFF 2.68kHz (140:1, PIN 10 GND) C. fCLK = 500kHz fCUTOFF 10kHz (50:1, PIN TO V PINS 1-13 SHORTED)


 

Related products with the same datasheet
LTC1164-5CJ
LTC1164-5CS
LTC1164-5MJ
LTC1164-6C
LTC1164-6CJ
LTC1164-6CS
LTC1164-6M
LTC1164-6MJ
LTC1164-7C
LTC1164-7CJ
LTC1164-7CS
Some Part number from the same manufacture Linear Technology Corporation
LTC1164-5MJ Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-6C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-7C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-7CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-7M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-8 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-8CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-XX LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164AC Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164ACJ LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164ACS Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164ACSW LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164AM Low Power, Low Noise, Quad Universal Filter Building Block

LT6660HCDC-2.5 : Tiny Micropower Precision Series References in 2mm 2mm DFN The LT6660 is a family of micropower series references that combine high accuracy and low drift with low power dissipation and extremely small package size. These series references use curvature compensation to obtain low temperature coef

LTC2634HUD-LZ10-PBF : Quad 12-Bit Rail-to-Rail DACs With 10ppm/C Reference The LTC2634 is a family of quad 12-, 10- and 8-bit voltage output DACs with an integrated, high accuracy, low drift 10ppm/C reference in 16-lead QFN and 10-lead MSOP packages. It has rail-to-rail output buffers and is guaranteed monotonic. The

LT1965EDDPBF : 1.1a, Low Noise, Low Dropout Linear Regulator

LT3579EFE#TRPBF : 6A Boost/Inverting DC/DC Converter With Fault Protection The LT3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch

LTC3546EFE#TRPBF : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Step-Down (Buck) Yes 0.6 V ~ 5 V; IC BUCK SYNC DUAL ADJ 28TSSOP Specifications: Type: Step-Down (Buck) ; Output Type: Adjustable ; PWM Type: Current Mode, Hybrid ; Synchronous Rectifier: Yes ; Number of Outputs: 2 ; Voltage - Output: 0.6 V ~ 5 V ; Current - Output: 1A, 2A ; Frequency - Switching: 2.25MHz, 750kHz ~ 4MHz ; Voltage - Input: 2.25 V ~ 5.5 V ; Lead Fr

LTC1517ES5-3.3#TRMPBF : SWITCHED CAPACITOR REGULATOR, 700 kHz SWITCHING FREQ-MAX, PDSO5 Specifications: Configuration / Function: DOUBLER INVERTER ; Package Type: SOT23, Other, PLASTIC, SOT-23, 5 PIN ; Life Cycle Stage: ACTIVE ; VIN: 2 to 4.4 volts ; fsw: 700 kHz ; Operating Temperature: 0 to 70 C (32 to 158 F)

LTC2494CUHF#TR : 16-CH 16-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PQCC38 Specifications: Package Type: 5 X 7 MM, PLASTIC, MO-220WKHD, QFN-38 ; Screening Level: Commercial ; Pins: 38 ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; ADC Type: Sigma-Delta

LTC3805HMSE#TRPBF : SWITCHING CONTROLLER, 700 kHz SWITCHING FREQ-MAX, PDSO10 Specifications: Configuration / Function: SINGLE ; Package Type: Other, PLASTIC, MSOP-10 ; Life Cycle Stage: ACTIVE ; VIN: 8 volts ; fsw: 700 kHz

LTM8063EYPBF : DC DC CONVERTER 0.8-15V

 
0-C     D-L     M-R     S-Z