Details, datasheet, quote on part number: LTC1156CS
PartLTC1156CS
CategoryPower Management => Power Distribution/Switches => Power Switches => High Side Switches
TitleHigh Side Switches
DescriptionLTC1156, Quad High Side Micropower N-Ch. MOSFET Driver With Internal Charge Pump
CompanyLinear Technology Corporation
DatasheetDownload LTC1156CS datasheet
Quote
Find where to buy
 
  

 

Features, Applications
LTC1156 Quad High Side Micropower MOSFET Driver with Internal Charge Pump DESCRIPTIO

The LTC1156 quad High side gate driver allows using low cost N-channel FETs for high side switching applications. An internal charge pump boosts the gate drive voltage above the positive rail, fully enhancing an N-channel MOS switch with no external components. Micropower operation, with 16A standby current and 95A operating current, allows use in virtually all systems with maximum efficiency. Included on chip is independent over-current sensing to provide automatic shutdown in case of short circuits. A time delay can be added to the current sense to prevent false triggering on high in-rush current loads. The LTC1156 operates off to 18V supply and is well suited for battery-powered applications, particularly where micropower "sleep" operation is required. The LTC1156 is available in both 16-pin DIP and 16-pin SOL packages.

FEATURES

No External Charge Pump Components Fully Enhances N-Channel Power MOSFETs 16 Microamps Standby Current 95 Microamps ON Current Wide Power Supply Range to 18V Controlled Switching ON and OFF Times Replaces P-Channel High Side Switches Compatible with Standard Logic Families Available in 16-pin SOL Package

Laptop Computer Power Switching SCSI Termination Power Switching Cellular Telephone Power Management P-Channel Switch Replacement Battery Charging and Management Low Frequency H-Bridge Driver Stepper Motor and DC Motor Control

HARD DISK DRIVE FLOPPY DISK DRIVE

PERIPHERAL ALL COMPONENTS SHOWN ARE SURFACE MOUNT. MINIMUM PARTS COUNT SHOWN. CURRENT LIMITS CAN BE SET SEPARATELY AND TAILORED TO INDIVIDUAL LOAD CHARACTERISTICS. * IMS026 INTERNATIONAL MANUFACTURING SERVICES, INC. (401) 683-9700

Operating Temperature Range to 70C Storage Temperature Range................. to 150C Lead Temperature (Soldering, 10 sec.)................. 300C Supply Voltage....................................................... 22V Input Voltage..................... (VS 0.3V) to (GND 0.3V) Gate Voltage....................... (VS 24V) to (GND 0.3V) Current (Any Pin)................................................. 50mA

Consult factory for Industrial and Military grade parts.

SYMBOL VS IQ VINH VINL IIN CIN VSEN ISEN PARAMETER Supply Voltage Quiescent Current OFF Quiescent Current ON Quiescent Current ON Input High Voltage Input Low Voltage Input Current Input Capacitance Drain Sense Threshold Voltage Drain Sense Input Current (Note 1)

0V < VSEN = 5V, CGATE = 1000pF Time for VGATE + 2V Time for VGATE = 12V, CGATE = 1000pF Time for VGATE + 5V Time for VGATE + 10V


CONDITIONS = 5V, CGATE = 1000pF Time for VGATE = 12V, CGATE = 1000pF Time for VGATE = 5V, CGATE = 1000pF Time for VGATE = 12V, CGATE = 1000pF Time for VGATE < 1V

The q denotes specifications which apply over the full operating temperature range. Note 1: Both VS pins (3 and 8) must be connected together, and both ground pins (1 and 6) must be connected together.

Note 2: Quiescent current OFF is for all channels in OFF condition. Note 3: Quiescent current ON is per driver and is measured independently.



 

Related products with the same datasheet
LTC1156CN
Some Part number from the same manufacture Linear Technology Corporation
LTC1156CSW Quad High Side Micropower MOSFET Driver With Internal Charge Pump
LTC1157 LTC1157, 3.3V Dual Micropower High-side/low-side MOSFET Driver
LTC1159 LTC1159, 40V Synchr. Step-down W/Ext. VCC Pin
LTC1163 LTC1163, Triple 1.8V to 6V High-side MOSFET Drivers
LTC1164 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-5C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-5CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-5CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-5CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-5M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-6C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-6CSW Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-6M Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7 LTC1164-5, 8th Order, 20kHz, Butterworth or Bessel, Low Pass Filter
LTC1164-7C Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CN Low Power, Low Noise, Quad Universal Filter Building Block
LTC1164-7CS Low Power 8th Order Pin Selectable Butterworth or Bessel Lowpass Filter
LTC1164-7CSW Low Power, Low Noise, Quad Universal Filter Building Block

LTC1261LCMS8-4 : Switched Capacitor Regulated Voltage Inverter

LTC3736EUF : Dual 2-Phase, no Rsense , Synchronous Controller With Output Trackingfeaturesno Current Sense Resistors Required Out-of-Phase Controllers Reduce Required Input Capacitance Tracking Function Wide Vin Range: 2.75V to 9.8V Constant Frequency Current Mode Operat

LTC2858IMS-1 : 20mbps Rs485 Transceivers with Integrated Switchable Termination

LT6207IGN#PBF : Linear - Amplifier - Video Amp And Module Integrated Circuit (ics) Rail-to-Rail Tube 4mA -; IC OPAMP VID QUAD 100MHZ 16-SSOP Specifications: Applications: Voltage Feedback ; -3db Bandwidth: - ; Slew Rate: 600 V/s ; Number of Circuits: 4 ; Current - Supply: 4mA ; Current - Output / Channel: 60mA ; Voltage - Supply, Single/Dual (): 2.7 V ~ 12.6 V, 1.35 V ~ 6.3 V ; Output Type: Rail-to-Rail ; Package / Case: 16-SSOP (0.15

LT3015MPMSE-15#TRPBF : 1.5A, Low Noise, Negative Linear Regulator With Precision Current Limit The LT3015 is a low noise, low dropout, negative linear regulator with fast transient response. The device supplies up to 1.5A of output current at a typical dropout voltage of 310mV. Operating quiescent current is typically 1

LTC2960IDC-3#TRMPBF : Undefined Family Undefined Category; IC VOLTAGE MONITOR 8-DFN Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

LT1461CIS8-5#TR : 2.5V LT1461AIS8-2.5, Micropower Precision Low Dropout Series Voltage Reference

LT1722IS5#TRMPBF : OP-AMP, 1100 uV OFFSET-MAX, 200 MHz BAND WIDTH, PDSO5 Specifications: Supply Voltage (VS): 5 volts ; IBIAS: 0.4000 µA ; CMRR: 75 dB ; Slew Rate: 70 V/µs ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Package Type: SOT23, 1 MM HEIGHT, LEAD FREE, PLASTIC, MO-193, TSOT-23, 5 PIN ; Number of Pins: 5 ; Number of Devices: 1 ; Standards: RoHS

 
0-C     D-L     M-R     S-Z