Details, datasheet, quote on part number: ISL5120CU
CategoryLogic => Analog Switches/Multiplexers
DescriptionLow-voltage, Single Supply, Dual Spst, SPDT Analog Switches
CompanyIntersil Corporation
DatasheetDownload ISL5120CU datasheet
Find where to buy


Features, Applications

Low-Voltage, Single Supply, Dual SPST, SPDT Analog Switches

The Intersil ISL5120ISL5123 devices are precision, bidirectional, dual analog switches designed to operate from a single to +12V supply. Targeted applications include battery powered equipment that benefit from the devices' low power consumption (5W), low leakage currents (100pA max), and fast switching speeds (tON = 28ns, tOFF = 20ns). Cell phones, for example, often face ASIC functionality limitations. The number of analog input or GPIO pins may be limited and digital geometries are not well suited to analog switch performance. This family of parts may be used to "muxin" additional functionality while reducing ASIC design risk. Some of the smallest packages are available, alleviating board space limitations, and making Intersil's newest line of low-voltage switches an ideal solution. The ISL5120/ISL5121/ISL5122 are dual single-pole/singlethrow (SPST) devices. The ISL5120 has two normally open (NO) switches; the ISL5121 has two normally closed (NC) switches; the ISL5122 has one NO and one NC switch and can be used as an SPDT. The is a committed SPDT, which is perfect for use in 2-to-1 multiplexer applications.

TABLE 1. FEATURES AT A GLANCE ISL5120 Number of Switches 2 3.3V RON 3.3V tON / tOFF 5V RON 5V tON / tOFF 12V RON 12V tON / tOFF Packages 8 Ld SOIC, 8 Ld MSOP ISL5123 1 SPDT 8 Ld SOIC, Ld SOT-23


Improved (lower RON, faster switching), pin compatible replacements for ISL8454144 Fully specified 3.3V, 5V, and 12V supplies ON resistance (RON). 19 RON matching between channels. 1 Low charge injection. 5pC (Max) Single supply operation. to +12V Low power consumption (PD). < 5W Low leakage current. 10nA Fast switching action - tON. 28ns - tOFF. 20ns Guaranteed break-before-make (ISL5122/ISL5123 only) Minimum 2000V ESD protection per method 3015.7 TTL, CMOS compatible Available in SOT-23 packaging


Battery powered, handheld, and portable equipment - Cellular/mobile phones - Pagers - Laptops, notebooks, palmtops Communications systems - Military radios - PBX, PABX Test equipment - Ultrasound - Electrocardiograph Heads-up displays Audio and video switching Various circuits - +3V/+5V DACs and ADCs - Sample and hold circuits - Digital filters - Operational amplifier gain switching networks - High frequency analog switching - High speed multiplexing - Integrator reset circuits

Technical Brief TB363 "Guidelines for Handling and Processing Moisture Sensitive Surface Mount Devices (SMDs)"

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003. All Rights Reserved

PIN V+ GND IN COM NO NC N.C. FUNCTION System Power Supply Input to +12V) Ground Connection Digital Control Input Analog Switch Common Pin Analog Switch Normally Open Pin Analog Switch Normally Closed Pin No Internal Connection

PART NO. (BRAND) (NOTE ISL5123IH-T (123I) NOTES: 2. Most surface mount devices are available on tape and reel; add "-T" to suffix. * In Development. TEMP. RANGE (oC) to 85 PACKAGE 8 Ld SOIC 8 Ld MSOP 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC 8 Ld SOIC Ld SOT-23 PKG. NO. M8.15 P6.064


Some Part number from the same manufacture Intersil Corporation
ISL5120IB Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL5216 ISL5216 Datasheet
ISL5217 Quad Programmable up Converter
ISL5239 Pre-distortion Linearizer
ISL5314 Commlinktm Direct Digital Synthesizer
ISL5416 Four-channel Wideband Programmable Downconverter
ISL5571A Access High Voltage Switch
ISL5585 3.3 Volt Ringing Slic Family For Voice Over Broadband (VOB)
ISL5586 Low Power Ringing Slic For Home Gateways
ISL5627 Dual 8-bit, +3.3V, 260+MSPS, High Speed D/A Converter<<<>>>the ISL5627 is a Dual 8-bit, 260+MSPS (Mega Samples Per Second), CMOS, High Speed, Low Power, D/A (digital to Analog) Converter, Designed Specifically
ISL5629 Dual 8-bit, +3.3V, 130/210+MSPS, Commlink High Speed D/A Converter
ISL56292IN Dual 8-bit, +3.3v, 130/210msps, Commlink TM High Speed D/A Converter
ISL5629EVAL1 Dual 8-bit, +3.3V, 130/210+MSPS, Commlink High Speed D/A Converter
ISL5640 3v Dual 8-bit, 20/40/60msps A/D Converter With Internal Voltage Reference
ISL5727 Dual 10-bit, +3.3V, 260+MSPS, High Speed D/A Converter<<<>>>the ISL5727 is a Dual 10-bit, 260+MSPS (Mega Samples Per Second), CMOS, High Speed, Low Power, D/A (digital to Analog) Converter, Designed Specifically
ISL5729 Dual 10-bit, +3.3V, 130/210+MSPS, Commlink High Speed D/A Converter
ISL57292IN Dual 10-bit, +3.3v, 130/210msps, Commlink TM High Speed D/A Converter

DG181A :

EL5423CR-T13 : Buffer, 12MHz, Rail-to-rail Input-Output, 600A, 12 Channel

ICL7116C : Display Output ADC 3 1/_2 Digit, Lcd/led Display, A/D Converter With Display Hold

ISL83384EIB-T : 15kV Esd Protected, +3V to +5.5V, 1 Microamp, 250Kbps, RS-232 Transmitter/receiver

X60008B-25 : Precision 2.500V FGA Voltage Reference The X60008-25 FGA voltage references are very high precision analog voltage references fabricated in Xicors proprietary Floating Gate Analog technology, which achieves superior levels of performance when compared to conventional band gap, buried zener, or X

ISL43L410IUZ : Ultra Low ON-Resistance, Low Voltage, Single Supply, DPDT Analog Switch The Intersil ISL43L410 device is a low ON-resistance, low voltage, bidirectional, double-pole/double-throw (DPDT) analog switch designed to operate from a single +1.65V to +3.6V supply. It is equipped with an inhibit pin to sim

X28HC64PZ-90 : 5 Volt, Byte Alterable Eeprom

X9521V20I-A : Dual DCP, Eeprom Memory

X40010S8-C : Pmic - Supervisor Integrated Circuit (ics) Multi-Voltage Supervisor Tube 2; IC VOLTAGE MONITOR DUAL 8-SOIC Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: 8-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Number of Voltages Monitored: 2 ; Reset Timeout: Adjustable/Selectable ; Type: Multi-Voltage Supervisor ; Voltage - Threshold: 1.7V, 2.9V ; Operating Temperature: 0

5962F0251102QXC : 2.25 V-26 V ADJUSTABLE NEGATIVE LDO REGULATOR, 1 V DROPOUT, CDFP28 Specifications: Regulator Type: Low Dropout ; Output Polarity: Negative ; Output Voltage Type: Adjustable / Variable ; Package Type: Other, CERAMIC, DFP-28 ; Life Cycle Stage: ACTIVE ; Output Voltage: 2.25 to 26 volts ; Dropout Voltage: 1 volts

Same catergory

54AC157 : Military/Aerospace->FACT AC. 54AC157 - Quad 2-Input Multiplexer, Package: Lcc, Pin Nb=20.

74ALVCH16271 : 3.3V CMOS 12-BIT to 24-BIT Multiplexed Bus Exchanger With 3-STATE Outputs And Bus-hold.


DP8482A : Bipolar->ECL 100 Family. 100k Ecl to TTL Level Translator With Latch.

HD74HC682 : 8-bit Magnitude Comparator. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

JM38510/31003B2A : ti SN54LS21, Dual 4-Input Positive-and Gates. PRODUCTION DATA information is current as of publication date. Products conform to s per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. .

MC10E1652 : Bipolar->ECL 10 Family. Dual Analog Comparator. The MC10E1652 is fabricated using ON Semiconductor's advanced MOSAIC IIIt process and is output compatible with 10H logic devices. In addition, the device is available in both a 16-pin DIP and a 20-pin surface mount package. However, the MC10E1652 provides user programmable hysteresis. The latch enable (LENa and LENb) input pins operate from standard.

MC74VHC1GT08DFT2 : 2-Input And Gate/cmos Logic Level Shifter , Package: SC-88A (SOT-353), Pins=5.

MC84-74HC393 : Dual 4-stage Binary Ripple Counter. The MC54/74HC393 is identical in pinout to the LS393. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device consists of two independent 4bit binary ripple counters with parallel outputs from each counter stage. 256 counter can be obtained by cascading the two binary.

MM74HC595 : CMOS/BiCMOS->HC/HCT Family. 8-Bit Shift Registers With Output Latches.

PCA9515 : Bus Oriented Circuits. PCA9515; I2C Bus Repeater. The is a BiCMOS integrated circuit intended for application in I2C and SMBus systems. While retaining all the operating modes and of the I2C system it permits extension of the I2C-bus by buffering both the data (SDA) and the clock (SCL) lines, thus enabling two buses of 400 pF. The capacitance limit 400 pF restricts the number of devices and bus length.

PI49FCT2807T : CMOS/BiCMOS->FCT/FCT-T Family. 10 Output Clock Driver With 25 Ohm, Industrial Temp. Operation.

SDE2526-5 : Nonvolatile Memory 2-kbit E2PROM With I2c Bus Interface With Extended Temperature Range.

SN54ABT540 : Octal Buffers/drivers With 3-state Outputs. State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25C High-Drive Outputs (32-mA IOH, 64-mA IOL) Package.

SN74ABT861DW : Standard Transceivers. ti SN74ABT861, 10-Bit Transceivers With 3-State Outputs.

SN74AHCT14MDREP : ti SN74AHCT14-EP, Military Enhanced Plastic Hex Schmitt-trigger Inverters.

933372990652 : 4000/14000/40000 SERIES, 8-INPUT NAND GATE, PDSO14. s: Gate Type: NAND ; Supply Voltage: 5V ; Logic Family: CMOS ; Inputs: 8 ; Propagation Delay: 195 ns ; Pin Count: 14 ; IC Package Type: Other, PLASTIC, SOT-108-1, SO-14.

0-C     D-L     M-R     S-Z