Details, datasheet, quote on part number: ISL4489EIB
PartISL4489EIB
CategoryInterface and Interconnect => RS-485/RS-422
Description15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single Transceivers That Meet Both The RS-485 And RS-422 Standards For Balanced Communication. Each Driver Output And Receiver Input is Protected Against 15kV Esd Strikes, Without Latch-up. Unlike Competitive Versions, These Intersil Devices Are Specified For 10% Tolerance Supplies (4.5V to 5.5V).
CompanyIntersil Corporation
DatasheetDownload ISL4489EIB datasheet
Cross ref.Similar parts: DS14185, DS1487, DS16F95A, DS16F95QML, DS36276, DS36277, DS3695, DS3695A, DS3695AT, DS3695T
Quote
Find where to buy
 
Packages14 Ld SOIC
  

 

Features, Applications

±15kV ESD Protected, 1/8 Unit Load, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers

The ISL4489E, ISL4491E are ESD protected, "fractional" unit load, BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive versions, these Intersil devices are specified for 10% tolerance supplies 5.5V). Rx inputs and Tx outputs present a "1/8 unit load" to the RS-485 bus, which allows a total of 256 transmitters and receivers on the network for large node count systems. These devices are configured for full duplex (separate Rx input and Tx output pins) applications, so they are ideal for RS-422 networks requiring high ESD tolerance on the bus pins. The ISL4489E utilizes a slew rate limited driver which reduces EMI, and minimizes reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates to 15Mbps are achievable by using the ISL4491E, which features higher slew rates. Receiver (Rx) inputs feature a "fail-safe if open" design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.

Features

RS-485 I/O Pin ESD Protection. ±15kV HBM - Class 3 ESD Level on all Other Pins. >7kV HBM 1/8 Unit Load Allows to 256 Devices on the Bus High Data Rates to 15Mbps Slew Rate Limited Version for Error Free Data Transmission (ISL4489E) Very Low Quiescent Current: to +12V Common Mode Input Voltage Range Three-State Rx and Tx Outputs Full Duplex Pinout Operates from a Single +5V Supply (10% Tolerance) Current Limiting and Thermal Shutdown for driver Overload Protection

Applications

Factory Automation Security Networks Building Environmental Control Systems Industrial/Process Control Networks Level Translators (e.g., RS-422) RS-232 "Extension Cords"

TABLE 1. SUMMARY OF FEATURES PART NUMBER ISL4489E ISL4491E HALF/FULL DUPLEX Full HIGH ESD? Yes NO. OF DEVICES ALLOWED ON BUS 256 DATA RATE (Mbps) 0.25 15 SLEW-RATE RECEIVER/ QUIESCENT PIN LIMITED? DRIVER ENABLE? ICC (µA) COUNT Yes No Yes

PART NO. ISL4489EIB ISL4489EIB-T TEMP. RANGE (°C) to 85 PACKAGE 14 Ld SOIC 14 Ld SOIC Tape and Reel 14 Ld SOIC PKG. DWG. # M14.15

PART NO. ISL4491EIB-T TEMP. RANGE (°C) to 85 PACKAGE 14 Ld SOIC Tape and Reel PKG. DWG. # M14.15

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2004. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.

TRANSMITTING INPUTS 0 DI High-Z OUTPUTS 1 0 High-Z RE RECEIVING INPUTS DE A-B +0.2V -0.2V Inputs Open X OUTPUT 0 1 High-Z

PIN DE DI GND VCC NC FUNCTION Receiver output: by at least RO is high; 0.2V or more, RO is low; RO = High if A and B are unconnected (floating). Receiver output enable. RO is enabled when RE is low; RO is high impedance when RE is high. Driver output enable. The driver outputs, Y and Z, are enabled by bringing DE high. They are high impedance when DE is low. Driver input. A low on DI forces output Y low and output Z high. Similarly, a high on DI forces output Y high and output Z low. Ground connection. ±15kV HBM ESD Protected, Noninverting receiver input. ±15kV HBM ESD Protected, Inverting receiver input. ±15kV HBM ESD Protected, Noninverting driver output. ±15kV HBM ESD Protected, Inverting driver output. System power supply input 5.5V). No Connection.


 

Related products with the same datasheet
ISL4489EIB-T
ISL4491E
ISL4491EIB
ISL4491EIB-T
Some Part number from the same manufacture Intersil Corporation
ISL4489EIB-T 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers <<<>>> <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered,
ISL4489EIB-T
ISL4491E 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, High Speed, Full Duplex, RS-485/RS-422 Transceivers <<<>>> <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL4491E 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL4491EIB 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, High Speed, Full Duplex, RS-485/RS-422 Transceivers <<<>>> <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL4491EIB 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL4491EIB-T 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, High Speed, Full Duplex, RS-485/RS-422 Transceivers <<<>>> <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL4491EIB-T 15kV Esd Protected, 1/8 Unit Load, 5V, Low Power, Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers <<<>>>The ISL4489E, ISL4491E Are Esd Protected, Fractional Unit Load, Bicmos, 5V Powered, Single
ISL5120 Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL5120CU Low-voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL5120IB Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL5216 ISL5216 Datasheet
ISL5217 Quad Programmable up Converter
ISL5239 Pre-distortion Linearizer
ISL5314 Commlinktm Direct Digital Synthesizer
ISL5416 Four-channel Wideband Programmable Downconverter
ISL5571A Access High Voltage Switch
ISL5585 3.3 Volt Ringing Slic Family For Voice Over Broadband (VOB)
ISL5586 Low Power Ringing Slic For Home Gateways
ISL5627 Dual 8-bit, +3.3V, 260+MSPS, High Speed D/A Converter<<<>>>the ISL5627 is a Dual 8-bit, 260+MSPS (Mega Samples Per Second), CMOS, High Speed, Low Power, D/A (digital to Analog) Converter, Designed Specifically
ISL5629 Dual 8-bit, +3.3V, 130/210+MSPS, Commlink High Speed D/A Converter

CDP1802AC/3 : CMOS 8-Bit Microprocessors

IRF423 : 2.2A And 2.5A, 450V And 500V, 3.0 And 4.0 Ohm, N-channel Power MOSFETs

ISL83088EIB : ±15kV ESD Protected, 5V, Full Fail-Safe, Fractional (1/8) Unit Load, RS-485/RS-422 Transceivers The ISL8308XE are BiCMOS, ESD protected, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output, and receiver input, is protected ag

ISL97653AIRZ-TK : 5-Channel Integrated LCD Supply The ISL97653A represents a fully integrated supply IC for LCD-TV applications. With an input operating range of 4V to 14V, both commonly used LCD-TV input supplies, 5V and 12V, are supported. An AVDD supply up to 20V is generated by a high-performance PWM BOOST conve

X9C303PZ : Logarithmic Digitally Controlled Potentiometer

X9429WV14-2.7 : Single Digitally Controlled Potentiometer

X5323V14IZ-2.7A : CPU Supervisor with 32Kb SPI Eeprom

ISL6295CV : Flexihash˘â For Battery Authentication

X4043S8IZ-4.5A : CPU Supervisor with 4kbit Eeprom

ISL54102CQZ : Interface - Specialized Integrated Circuit (ics) Tray 3 V ~ 3.6 V; IC TMDS REGEN W/MUX 128MQFP Specifications: Applications: Displays ; Interface: I&sup2;C ; Voltage - Supply: 3 V ~ 3.6 V ; Package / Case: 128-BFQFP ; Packaging: Tray ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

5962R9672302VXX : 4000/14000/40000 SERIES, DUAL MONOSTABLE MULTIVIBRATOR, CDFP16 Specifications: Supply Voltage: 5V ; Features: Complementary Output ; Package Type: Other, CERAMIC, FP-16 ; Logic Family: CMOS ; Number of Pins: 16 ; Propagation Delay: 810 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

 
0-C     D-L     M-R     S-Z