Details, datasheet, quote on part number: ISL4260EIR-T
CategoryAnalog & Mixed-Signal Processing
DescriptionQFN Packaged, 15kV Esd Protected, +3V to +5.5V, 150nA, 250kbps, RS-232 Transmitters/receivers With Separate Logic Supply
CompanyIntersil Corporation
DatasheetDownload ISL4260EIR-T datasheet
Find where to buy


Features, Applications

QFN Packaged, 15kV ESD Protected, 250kbps, RS-232 Transmitters/Receivers with Separate Logic Supply

The ISL4260E contains to 5.5V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Targeted applications are PDAs, Palmtops, and cell phones where the low operational, and even lower standby, power consumption is critical. Efficient on-chip charge pumps, coupled with a manual powerdown function reduces the standby supply current a 150nA trickle. Tiny x 5mm Quad Flat NoLead (QFN) packaging, and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 250kbps are guaranteed at worst case load conditions. The ISL4260E features a VL pin that adjusts the logic pin (see Pin Descriptions table) output levels and input thresholds to values compatible with the VCC powering the external logic (e.g., a UART). The single pin powerdown function (SHDN = 0) disables all the receiver and transmitter outputs, while shutting down the charge pump to minimize supply current drain. Table 1 summarizes the features of the ISL4260E, while Application Note AN9863 summarizes the features of each device comprising the 3V RS-232 family.


Available in Near Chip Scale QFN (5mmx5mm) Package VL Pin for Compatibility with Mixed Voltage Systems ESD Protection for RS-232 I/O Pins 15kV (IEC61000) Single SHDN Pin Disables Transmitters and Receivers Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V On-Chip Charge Pumps Require Only Four External 0.1F Capacitors Receiver Hysteresis For Improved Noise Immunity Very Low Supply Current. 300A Guaranteed Minimum Data Rate. 250kbps Wide Power Supply Range. Single to +5.5V Low Supply Current in Powerdown State.150nA


Any System Requiring RS-232 Communication Ports - Battery Powered, Hand-Held, and Portable Equipment - Laptop Computers, Notebooks, Palmtops - Digital Cameras - PDAs and PDA Cradles - Cellular/Mobile Phones

PART NUMBER ISL4260EIR ISL4260EIR-T TEMP. RANGE (oC) to 85 PACKAGE 32 Lead QFN 32 Lead QFN Tape & Reel PKG. NO. L32.5x5


CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003. All Rights Reserved

PIN VCC V+ VGND C1C2+ C2TIN TOUT RIN ROUT VL SHDN NC System power supply input to 5.5V). Internally generated positive transmitter supply (+5.5V). Internally generated negative transmitter supply (-5.5V). Ground connection. External capacitor (voltage doubler) is connected to this lead. External capacitor (voltage doubler) is connected to this lead. External capacitor (voltage inverter) is connected to this lead. External capacitor (voltage inverter) is connected to this lead. TTL/CMOS compatible transmitter Inputs. The switching point is a function of the VL voltage. 15kV ESD Protected, RS-232 level (nominally 5.5V) transmitter outputs. 15kV ESD Protected, RS-232 compatible receiver inputs. TTL/CMOS level receiver outputs. Swings between GND and VL. Logic-Level Supply. All TTL/CMOS inputs and outputs are powered by this supply. Active low TTL/CMOS input to tri-state receiver and transmitter outputs and to shut down the on-board power supply to place device in low power mode. The switching point is a function of the VL voltage. No Connection FUNCTION


Related products with the same datasheet
Some Part number from the same manufacture Intersil Corporation
ISL4270E QFN Packaged, +/-15kV Esd Protected, +3V to +5.5V, 300nA, 250kbps, RS-232 Transceivers With Enhanced Automatic Powerdown And a Separate Logic Supply
ISL43110 Low-Voltage, Single Supply, Spst, High Performance Analog Switches
ISL43112 Low-Voltage, Dual Supply, Spst, High Performance Analog Switches
ISL43120 Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL43140 Low-Voltage, Single And Dual Supply, High Performance, Quad Spst, Analog Switches
ISL43143 Low-Voltage, Single And Dual Supply, Quad Spst, High Performance Analog Switches
ISL43210 Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL43231 Low-voltage, Single And Dual Supply, Triple SPDT Analog Switch
ISL43240 Low-Voltage, Single And Dual Supply, Quad Spdt, Analog Switches
ISL43410 Low-Voltage, Single Supply, DPDT High Performance Analog Switch
ISL43485 3.3V, Low Power, 30Mbps, RS-485/RS-422 Transceiver
ISL43640 Low-Voltage, Single Supply, 4 to 1 Multiplexer, High Performance Analog Switch
ISL43681 Low-voltage, Single And Dual Supply, 8 to 1 Multiplexer And Differential 4 to 1 Multiplexer
ISL43840 Low-voltage, Single And Dual Supply, Dual 4 to 1 Multiplexer Analog Switch With Enable
ISL43L120 Ultra Low ON-Resistance, Single Supply, Dual SPST Analog Switches<<<>>>the Intersil ISL43L120, ISL43L121, ISL43L122 Devices Are Low ON-resistance, Low Voltage, Bidirectional, Precision, Dual Single-pole/single-throw

EL7581IRE : DC-DC Converter, 3-Channel, Tft/lcd Applications, Vin=2/14V Vboost=5/18V, Von=5/40V, Voff=-40/0V, Iboost 720mA @ 12V

MWS5101AL2 : SRAM 256-Word X 4-Bit Lsi Static RAM

RFM18N10 : 18a, 80v And 100v, 0.100 Ohm, N-channel Power MOSFETs

ISL21007CFB812Z : Precision, Low Noise FGA Voltage References The ISL21007 FGA voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersils proprietary Floating Gate Analog technology. The ISL21007 features very low noise (4μVP-P for 0.1Hz to 10Hz) and

HA-2622 : 100mhz, High Input Impedance, Very Wideband, Uncompensated Operational Amplifiers

ICL7611DCJD : 1.4mhz, Low Power CMOS Operational Amplifiers

X4045S8-4.5A : CPU Supervisor with 4kbit Eeprom

HIP2122 : 100V, 2A Peak, High Frequency Half-Bridge Drivers With Rising Edge Delay Timer The HIP2122 and HIP2123 are 100V, high frequency, half-bridge MOSFET driver ICs. They are based on the popular ISL2100A and ISL2101A half-bridge drivers. Like the ISL2100A, two logic inputs, LI and HI, control both bridg

HI5728/6INZ : Data Acquisition - Digital To Analog Converter (dac) Integrated Circuit (ics) Tray Analog and Digital; DAC DUAL 10-BIT 60MHZ 48-LQFP Specifications: Data Interface: Parallel ; Number of Bits: 10 ; Operating Temperature: -40C ~ 85C ; Package / Case: 48-LQFP ; Packaging: Tray ; Voltage Supply Source: Analog and Digital ; Settling Time: 35ns ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ISL28107SOICEVAL1Z : Eval Board - Op Amp Programmers, Development System; EVAL BOARD FOR ISL28107 SOIC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ISL12028IB27AZ : REAL TIME CLOCK, PDSO20 Specifications: Device Type: Real Time Clock ; Package Type: Surface Mount, SOIC, ROHS COMPLIANT, PLASTIC, MS-013AC , SOIC-20 ; Supply Voltage: 2.7 to 5.5 volts ; Frequency: 0.0320 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

0-C     D-L     M-R     S-Z