Details, datasheet, quote on part number: ISL4238EIR
PartISL4238EIR
CategoryAnalog & Mixed-Signal Processing
DescriptionQFN Packaged, 15kV Esd Protected, +2.7V to +5.5V, 10Nanoamp, 250kbps/ 1Mbps, RS-232 Transceivers With Enhanced Automatic Powerdown
CompanyIntersil Corporation
DatasheetDownload ISL4238EIR datasheet
Quote
Find where to buy
 
  

 

Features, Applications

QFN Packaged, 15kV ESD Protected, 1Mbps, RS-232 Transceivers with Enhanced Automatic Powerdown

The Intersil ISL4238E/44E/45E devices are to 5.5V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide 15kV ESD protection (IEC6100-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are PDAs, Palmtops, and notebook and laptop computers where the low operational, and even lower standby, power consumption is critical. Efficient onchip charge pumps, coupled with manual and enhanced automatic powerdown functions, reduce the standby supply current a 10nA trickle. Tiny x 5mm Quad Flat NoLead (QFN) packaging and the use of small, low value capacitors ensure board space savings as well. Data rates greater than 1Mbps (ISL4245E) are guaranteed at worst case load conditions. The ISL424XE are 3 driver, 5 receiver (DTE) devices that, coupled with the QFN package, provide the industry's smallest, lowest power complete serial port suitable for PDAs, and laptop or notebook computers. The 5x5 QFN requires 60% less board area than a 28 lead TSSOP, and is nearly 20% thinner. The devices also include a noninverting always-active receiver for "wake-up" capability. The a 5 driver, 3 receiver device optimized for DCE applications with full hardware handshaking. It also includes a noninverting always-active receiver for RING INDICATOR monitoring. Transmitter and logic inputs include active feedback resistors that retain the input state once driven to a valid logic level. These devices feature an enhanced automatic powerdown function which powers down the on-chip powersupply and driver circuits. This occurs when all receiver and transmitter inputs detect no signal transitions for a period of 30sec. These devices power back up, automatically, whenever they sense a transition on any transmitter or receiver input. Table 1 summarizes the features of the ISL4238E/4XE, while Application Note AN9863 summarizes the features of each device comprising the 3V RS-232 family.

Features

Parameters Fully Specified for 10% Tolerance Supplies and Full Industrial Temp Range Available in Small QFN x 5mm) Package which is 60% Smaller than a 28 Lead TSSOP ESD Protection for RS-232 I/O Pins 15kV (IEC6100) DTE (ISL4244E/45E) and DCE (ISL4238E) Versions Lowest Supply Current in Powerdown.10nA Active Feedback Resistors on TX and Logic Inputs (ISL4238E) Flow Through Pinouts Manual and Enhanced Automatic Powerdown Features Guaranteed Minimum Data Rate 1Mbps (ISL4245E) Latch-Up Free On-Chip Charge Pumps Require Only Four External 0.1F Capacitors Wide Power Supply Range. Single to +5.5V Meets EIA/TIA-232 and V.28/V.24 Specifications 3V RS-232 Compatible with VCC = 2.7V

Applications

Any Space Constrained System Requiring RS-232 Ports - Battery Powered, Hand-Held, and Portable Equipment - Laptop Computers, Notebooks - PDAs and Palmtops, Data Cables - Cellular/Mobile Phones, Digital Cameras, GPS Receivers

Technical Brief TB363 "Guidelines for Handling and Processing Moisture Sensitive Surface Mount Devices" Technical Brief TB379 "Thermal Characterization of Packages for ICs" Technical Brief TB389 "PCB Land Pattern Design and Surface Mount Guidelines for QFN Packages"

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2002. All Rights Reserved All other trademarks mentioned are the property of their respective owners.

TABLE 1. SUMMARY OF FEATURES NO. OF MONITOR Rx. (ROUTB) 1 DATA RATE (kbps) 250 1000 MANUAL POWERDOWN? YES ENHANCED AUTOMATIC POWERDOWN FUNCTION? YES

PART NO. (BRAND) ISL4244EIR (4244EIR) TEMP. RANGE (oC) to 85 PACKAGE 32 Ld QFN Tape & Reel 32 Ld QFN PKG. NO. L32.5x5

PART NO. (BRAND) ISL4245EIR-T (4245EIR) TEMP. RANGE (oC) to 85 PACKAGE Tape & Reel 32 Ld QFN Tape & Reel PKG. NO. L32.5x5


PIN VCC V+ VGND C1C2+ C2TIN TOUT RIN ROUT ROUTB INVALID System power supply input to 5.5V). Internally generated positive transmitter supply (+5.5V). Internally generated negative transmitter supply (-5.5V). Ground connection. External capacitor (voltage doubler) is connected to this lead. External capacitor (voltage doubler) is connected to this lead. External capacitor (voltage inverter) is connected to this lead. External capacitor (voltage inverter) is connected to this lead. TTL/CMOS compatible transmitter Inputs. (Note 1) 15kV ESD Protected, RS-232 level (nominally 5.5V) transmitter outputs. 15kV ESD Protected, RS-232 compatible receiver inputs. TTL/CMOS level receiver outputs. TTL/CMOS level, noninverting, always enabled receiver outputs. Active low output that indicates if no valid RS-232 levels are present on any receiver input. FUNCTION

FORCEOFF Active low to shut down transmitters and on-chip power supply. This overrides any automatic circuitry and FORCEON (see Table 2). FORCEON NOTE: 1. ISL4238E input pins incorporate positive feedback resistors. Once the input is driven to a valid logic level, the feedback resistor maintains that logic level until VCC is removed. Unused transmitter inputs may be left unconnected by the user. Active high input to override automatic powerdown circuitry thereby keeping transmitters active. (FORCEOFF must be high).


 

Related products with the same datasheet
ISL4238EIR-T
ISL4244E
ISL4244EIR
ISL4244EIR-T
ISL4245E
ISL4245EIR
ISL4245EIR-T
Some Part number from the same manufacture Intersil Corporation
ISL4238EIR-T QFN Packaged, 15kV Esd Protected, +2.7V to +5.5V, 10Nanoamp, 250kbps/ 1Mbps, RS-232 Transceivers With Enhanced Automatic Powerdown
ISL4241E QFN Packaged, +/-15kV Esd Protected, +2.7V to +5.5V, 10Nanoamp, 250kbps, RS-232 Transmitters/receivers
ISL4244E QFN Packaged, 15kV Esd Protected, +2.7V to +5.5V, 10Nanoamp, 250kbps/ 1Mbps, RS-232 Transceivers With Enhanced Automatic Powerdown
ISL4260E QFN Packaged, 15kV Esd Protected, +3V to +5.5V, 150nA, 250kbps, RS-232 Transmitters/receivers With Separate Logic Supply
ISL4270E QFN Packaged, +/-15kV Esd Protected, +3V to +5.5V, 300nA, 250kbps, RS-232 Transceivers With Enhanced Automatic Powerdown And a Separate Logic Supply
ISL43110 Low-Voltage, Single Supply, Spst, High Performance Analog Switches
ISL43112 Low-Voltage, Dual Supply, Spst, High Performance Analog Switches
ISL43120 Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL43140 Low-Voltage, Single And Dual Supply, High Performance, Quad Spst, Analog Switches
ISL43143 Low-Voltage, Single And Dual Supply, Quad Spst, High Performance Analog Switches
ISL43210 Low-Voltage, Single Supply, Dual Spst, SPDT Analog Switches
ISL43231 Low-voltage, Single And Dual Supply, Triple SPDT Analog Switch
ISL43240 Low-Voltage, Single And Dual Supply, Quad Spdt, Analog Switches
ISL43410 Low-Voltage, Single Supply, DPDT High Performance Analog Switch
ISL43485 3.3V, Low Power, 30Mbps, RS-485/RS-422 Transceiver
ISL43640 Low-Voltage, Single Supply, 4 to 1 Multiplexer, High Performance Analog Switch
ISL43681 Low-voltage, Single And Dual Supply, 8 to 1 Multiplexer And Differential 4 to 1 Multiplexer
ISL43741

HA5320/883 : High Speed Precision Sample And Hold Amplifier

HC4P5524-9 : Eia/itu 24v Pabx Slic With 25ma Loop Feed

ISL59830IA-T7 : True Single Supply Video Driver The ISL59830 is a revolutionary device that allows true single-supply operation of video amplifiers. The device runs off a single 3.3V supply and generates the required negative voltage internally. This allows for DC-accurate coupling of video onto a 75 double-termi

ISL54004IR : Integrated Audio Amplifier Systems The Intersil ISL54004 device is an integrated audio power amplifier system that combines a mono BTL amplifier and stereo headphone amplifiers in a single device. It can operate from a single +2.7V to +5V power supply and is offered in a 20 Ld 4x4 TQFN package. Tar

ISL21007CFB830 : Precision, Low Noise FGA?? Voltage References The ISL21007 FGA?? voltage references are extremely low power, high precision, and low noise voltage references fabricated on Intersils proprietary Floating Gate Analog technology. The ISL21007 features very low noise (4.5?VP-P for 0.1Hz to 10Hz) and v

X1228V14IZ-2.7 : Real Time Clock/calendar/cpu Supervisor with Eeprom

ISL55004IB-T7 : MMIC Silicon Bipolar Broadband Amplifier

HIP4020IBZT : Half Amp Full Bridge Power Driver for Small 3V, 5V and 12V DC Motors

X9317TV8Z-2.7 : Low Noise, Low Power, 100 Taps

ISL26321 : 12-bit, 250kSPS Low-power ADC With Single-ended And Differential Inputs And Multiple Input Channels The ISL26320/21/22/23/24/25/29 family of sampling SAR-type ADCs feature excellent linearity over supply and temperature variations, and offer versions with 1-, 2-, 4- and 8-channel single-ended input

CD4047AF/883 : 4000/14000/40000 SERIES, MONOSTABLE MULTIVIBRATOR, CDIP14 Specifications: Supply Voltage: 5V ; Features: Complementary Output ; Package Type: DIP, Other, HERMETIC SEALED, CERAMIC, MO-001AB, DIP-14 ; Logic Family: CMOS ; Number of Pins: 14 ; Propagation Delay: 400 ns ; Operating Temperature: -55 to 125 C (-67 to 257 F)

ISL28117FRTZ : OP-AMP, 110 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8 Specifications: Supply Voltage (VS): 5 volts ; IBIAS: 0.0015 µA ; CMRR: 145 dB ; Slew Rate: 0.5000 V/µs ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Package Type: SOIC, ROHS COMPLIANT, PLASTIC, MS-012, SOIC-8 ; Number of Pins: 8 ; Number of Devices: 1

 
0-C     D-L     M-R     S-Z