|Category||Interface and Interconnect => Multi-Ports|
|Description||2K X 9 Dual-port RAM|
|Company||Integrated Device Technology, Inc.|
|Datasheet||Download 70121 datasheet
|HIGH-SPEED x 9 DUAL-PORT STATIC RAM WITH BUSY & INTERRUPT
High-speed access Commercial: 25/35/45/55ns (max.) Low-power operation IDT70121/70125S Active: 675mW (typ.) Standby: 5mW (typ.) IDT70121/70125L Active: 675mW (typ.) Standby: 1mW (typ.) Fully asychronous operation from either port MASTER IDT70121 easily expands data bus width to 18 bits or more using SLAVE IDT70125 chip On-chip port arbitration logic (IDT70121 only) BUSY output flag on Master; BUSY input on Slave
INT flag for port-to-port communication Battery backup operation2V data retention TTL-compatible, signal 5V (±10%) power supply Available in 52-pin PLCC Industrial temperature range +85°C) is available for selected speedsDescription
The IDT70121/IDT70125 are high-speed x 9 Dual-Port Static RAMs. The IDT70121 is designed to be used as a stand-alone 9-bit DualPort RAM as a MASTER Dual-Port RAM together with the IDT70125 SLAVE Dual-Port in 18-bit-or-more word width systems. Using the IDT MASTER/SLAVE Dual-Port RAM approach in 18-bit-or-wider memory system applications results in full-speed, error-free operation without the need for additional discrete logic.
NOTES: 1. 70121 (MASTER): BUSY is non-tri-stated push-pull output. 70125 (SLAVE): BUSY is input. 2. INT is totem-pole output.IDT70121/IDT70125 High-Speed x 9 Dual-Port Static RAM with Busy & Interrupt
Both devices provide two independent ports with separate control, address, and I/O pins that permit independent, asynchronous access for reads or writes to any location in memory. An automatic power-down feature, controlled by CE, permits the on-chip circuitry of each port to enter a very low standby power mode. The IDT70121/IDT70125 utilizes a 9-bit wide data path to allow for Data/Control and parity bits at the users option. This feature is especially
useful in data communications applications where it is necessary to use a parity bit for transmission/reception error checking. Fabricated using IDTs CMOS high-performance technology, these devices typically operate on only 675mW of power. Low-power (L) versions offer battery backup data retention capability with each port typically consuming 200µW from a 2V battery. The IDT70121/IDT70125 devices are packaged a 52-pin PLCC.A0L OEL A10L INTL BUSYL R/WL CEL VCC CER R/WR BUSYR INTR A10R
NOTES: 1. All VCC pins must be connected to power supply. 2. All GND pins must be connected to ground supply. 3. Package body in x.17 in. 4. This package code is used to reference the package diagram. 5. This text does not indicate orientation of the actual part-marking.IDT70121/IDT70125 High-Speed x 9 Dual-Port Static RAM with Busy & Interrupt
Symbol VTERM(2) Rating Terminal Voltage with Respect to GND Temperature Under Bias Storage Temperature DC Output Current Commercial & Industrial to +7.0 Unit VSymbol VCC GND Parameter Supply Voltage Ground Input High Voltage Input Low Voltage Min.
NOTES: 1. VIL > -1.5V for pulse width less than 10ns. 2. VTERM must not exceed Vcc + 10%.
NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliabilty. 2. VTERM must not exceed Vcc + 10% for more than 25% of the cycle time or 10ns maximum, and is limited < 20mA for the period of VTERM > Vcc + 10%.
Symbol CIN COUT Parameter Input Capacitance Output Capacitance Conditions(1) VIN 3dV V OUT = 3dV Max. 9 10 Unit pFNOTE: 1. This parameter is determined by device characterization but is not production tested.
NOTES: 1. This is the parameter TA. 2. Industrial temperature: for specific speeds, packages and powers contact your sales office.DC Electrical Characteristics Over the Operating Temperature and Supply Voltage Range (VCC ± 10%)
70121S 70125S Symbol |ILI| |ILO| VOL VOH Parameter Input Leakage Current
Output Leakage Current Output Low Voltage Output High Voltage
|Some Part number from the same manufacture Integrated Device Technology, Inc.|
|70125 2K X 9 Dual-port RAM|
|7014 4K X 9 Dual-port RAM|
|7015 8K X 9 Dual-port RAM|
|7016 16K X 9 Dual-port RAM|
|7018 64K x9 Dual-port RAM|
|7019 128K x9 Dual-port RAM|
|7024 4K X 16 Dual-port RAM|
|7025 8K X 16 Dual-port RAM|
|7026 16K X 16 Dual-port RAM|
|70261 16K X 16 Dual-port RAM W/int|
|7027 32K X 16 Dual-port RAM|
|7028 64K X16 Dual-port RAM|
|7034 4K X 18 Dual-port RAM|
|7035 8K X 18 Dual-port RAM|
|7037 32K X 18 Dual-port RAM|
|7038 64K X 18 Dual-port RAM|
|7052 2K X 8 Fourporttm RAM|
|7054 4K X 8 Fourporttm RAM|
|707278 32K X 16 Asynchronous Bank-switchable Dual-port SRAM|
|707288 64K X 16 Asynchronous Bank-switchable Dual-port SRAM|
|70824 4K X 16 Saramtm (Sequential Access / Random Access Memory)|
IDT7204L30TP : CMOS Asynchronous Fifo With Retransmit 1k X 9, 2k X 9, 4k X 9
IDT72201L20L : CMOS Syncfifoo 64 X 9, 256 X 9, 512 X 9, 1024 X 9, 2048 X 9 And 4096 X 9
IDT72V3626L-15 : 3.3v CMOS Triple Bus Syncfifo TM With Bus-matching
ICS8534BMI-13LFT : Clock/timing - Clock Buffers, Driver Integrated Circuit (ics) Fanout Buffer (Distribution), Multiplexer Tube 3.135 V ~ 3.465 V; IC FANOUT BUFFER 2-4 16-SOIC Specifications: Type: Fanout Buffer (Distribution), Multiplexer ; Frequency - Max: 266MHz ; Input: LVCMOS, LVTTL, Crystal ; Output: LVCMOS, LVPECL ; Voltage - Supply: 3.135 V ~ 3.465 V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tube ; Lead Free Status: Lead Free ; RoHS Status: RoH
IDTAS3699NLG8 : Interface - Analog Switches, Multiplexers, Demultiplexer Integrated Circuit (ics); IC SWITCH QUAD SPDT 16VFQFPN Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
ICS9159M-11 : 66 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO28 Specifications: Device Type: Clock Generator ; Bus Interface: CMOS ; Package Type: Surface Mount, SOIC, SOIC-28 ; Supply Voltage: 3 to 5.5 volts ; Frequency: 14.32 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)
IDT70V7319S166BFG : 256K X 18 DUAL-PORT SRAM, 15 ns, PBGA256 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 256 k ; Bits per Word: 18 bits ; Package Type: BGA, BGA-256 ; Pins: 256 ; Supply Voltage: 3.3V ; Access Time: 15 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)
IDT74FCT821BTL : FCT SERIES, LOW SKEW CLOCK DRIVER, 5 TRUE OUTPUT(S), 5 INVERTED OUTPUT(S), CDIP20 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: CERDIP-20 ; Supply Voltage: 4.75 to 5.25 volts ; Skew: 700 ps ; Operating Temperature: 0.0 to 70 C (32 to 158 F) ; Features / Standards: RoHS, Lead-Free
7130SA55TF : 1K X 8 DUAL-PORT SRAM, 55 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 8 kbits ; Number of Words: 1 k ; Bits per Word: 8 bits ; Package Type: DIP, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 55 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)
70824 : Multi-Ports. 4K X 16 Saramtm (Sequential Access / Random Access Memory).
82801E : 82801E I/o Controller Hub (C-ICH). Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied.
AN8377N : 3-channel Linear Driver. The an IC which incorporates 3 circuits of BTL drivers for driving various DC motors such as actuators (focus, tracking, traverse), spindles, and loading of the CD players, and the +5V low drop type power supply. (maximum drive current : 500mA) and temperature change due to the built-in stabilized power supply Built-in +5V low drop power supply (external.
CD2481 : CD2481 Programmable Four-channel Communications Controller. The is a four-channel synchronous/asynchronous communications controller specifically designed to reduce host-system processing overhead and increase efficiency in a wide variety of communications applications. A special member of the CD24X1 family, the device allows easy field upgrades and enhancement with an on-chip 8K-word microcode store for downloaded.
E8870 : Intel E8870 Scalable Node Controller (SNC).
EM83055 : Keyboard Controller. The EM83055H microcontroller is dedicated to a keyboard encoder ,specially designed for IBM PC AT and all compatible machines. The EM83055H controll all scan codes, three LEDs status, scan timing and communications between the keyboard and PC. It is easy to implement a high performance, low cost keyboard with the minimal external components. Low cost.
IDT54FCT640 : Fast CMOS Octal Bidirectional Transceivers. IDT54/74FCT245/640/645 equivalent to FASTTM speed and drive IDT54/74FCT245A/640A/645A 25% faster than FAST IDT54/74FCT245C/640C/645C 40% faster than FAST TTL input and output level compatible CMOS output level compatible IOL = 64mA (commercial) and 48mA (military) Input current levels only 5µA max. CMOS power levels (2.5mW typical static) Direction.
MAx9390 : MAX9390, MAX9391 Anything-to-lvds Dual 2 X 2 Crosspoint Switches. The MAX9390/MAX9391 dual x 2 crosspoint switches perform high-speed, low-power, and low-noise signal distribution. The MAX9390/MAX9391 multiplex one of two differential input pairs to either or both low-voltage differential signaling (LVDS) outputs for each channel. Independent enable inputs turn on or turn off each differential output pair. Four LVCMOS/LVTTL.
MC74F3893AFN : Quad Futurebus Backplane Transceiver ( 3 State + Open Collector ). MC74F3893A QUAD FUTUREBUS BACKPLANE TRANSCEIVER (3 STATE + OPEN COLLECTOR) The is a quad backplane transceiver and is intended to be used in very high speed bus systems. The MC74F3893A interfaces to "Backplane Transceiver Logic" (BTL). BTL a reduced (1 V) voltage swing for lower power consumption and a series diode on the drivers to reduce capacitive.
MIC59P50 : Latched/Addressable. MIC59P50 8-Bit Parallel-input Protected Latched Driver.
PAC560GTLQ : GTL Bus Socket 370 Terminators, Package : QSOP24.
PI3USB40 : 3.3V, Wide Bandwidth, 2-Channel, 2:1 Mux/demux Usb 2.0 Switch. 3.3V, Wide Bandwidth, 8-Channel, 2:1, Mux/Demux USB 2.0 Switch with Single Enable RON is 4 typical Low bit-to-bit skew: 200ps Low crosstalk: @ 250MHz Low Current Consumption: 20µA Near Zero propagation delay: 250ps Switching speed: 9ns Channel On capacitance: 6pF (typical) VCC Operating Range: +3.6V ESD>2000V. Human Body Model >500 MHz bandwidth.
PI7C8152 : PCI Bridge. 2-Port Pci-to-pci Bridge.
S5920 : Pci Target Controller General Purpose Pci Interface. PCI 2.1 Compliant Master/Slave Device Full 132 Mbytes/sec Transfer Rate PCI Bus Operation to 33 Mhz 8/16/32 Bit Add-On User Bus Four Definable Pass-Thru Regions Two 32 Byte FIFOs Sync/Async Add-On Bus Operation Mail Box Registers w/Byte Level Status Direct Mail Box Data Strobe/Interrupts Big/Little Endian Conversions Direct PCI & Add-On Interrupt Pins.
SN65518FN : ti SN65518, Vacuum Fluorescent Display Drivers. Each Device Drives 32 Lines 60-V Output Voltage Swing Capability 25-mA Output Source Current Capability High-Speed Serially Shifted Data Input Latches on All Driver Outputs The SN65518 and SN75518 are monolithic BIDFET integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display. Each device consists a 32-bit shift register,.
SN74ABT16470DGG : 16-bit Registered Transceivers With 3-state Outputs. Members of the Texas Instruments WidebusTM Family State-of-the-Art EPIC-B TM BiCMOS Design Significantly Reduces Power Dissipation Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17 Typical VOLP (Output Ground Bounce) V at VCC = 25°C Distributed VCC and GND Pin Configuration Minimizes High-Speed Switching Noise Flow-Through Architecture.
SN75ALS175 : Quadruple Differential Line Receiver. Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B, EIA/TIA-423-B, and RS-485 Meets ITU Recommendations V.11, X.26, and X.27 Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments Low Supply Current Requirement 27 mA Max Common-Mode Input Voltage Range 12 V Input Sensitivity. 200 mV Input Hysteresis. 50 mV Typ High Input.
STLVDS104 : 4-port LVDS And 4-port Ttl-to LVDS Repeaters. RECEIVER AND DRIVERS MEET OR EXCEED THE REQUIREMENTS OF ANSI EIA/TIA-644 STANDARD, RECEIVERS DIFFERENTIAL INPUT LEVELS, ±100mV DESIGNED FOR SIGNALING RATES TO 630Mbps OPERATES FROM A SINGLE 3.3V SUPPLY LOW VOLTAGE DIFFERENTIAL SIGNALING WITH TYPICAL OUTPUT VOLTAGE OF 350mV AND A 100 LOAD PROPAGATION DELAY TIME: 3.1ns (TYP) ELECTRICALLY COMPATIBLE WITH.
SY100EL1001 : Laser Diode Driver With Input D Flip-flop. LASER DIODE DRIVER WITH INPUT D FLIP-FLOP to 1.25Gb/s operation 75mA peak drive current Separate modulation control Separate master reset for laser safety Differential inputs for data and clock 75K input pulldown resistor Single power supply Available in 16-pin SOIC package The is a high speed current source for driving a semiconductor laser diode in optical.
ISL31483E : Fault Protected, Extended CMR, RS-485/RS-422 Transceivers With Cable Invert The ISL3148xE are fault protected, 5V powered differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are protected against faults up to ±60V. Additionally, the extended.