Details, datasheet, quote on part number: BQ2081
PartBQ2081
CategoryPower Management => Battery Management => Battery Monitoring => Monitor/Supervisory
TitleMonitor/Supervisory
DescriptionSBS Compliant Gas Gauge ic For Use With The Bq29311
CompanyInternational Components Corp.
DatasheetDownload BQ2081 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Charge in Li-Ion and Li-Polymer Batteries Supports the Smart Battery Specification (SBS) V1.1 Works With the TI bq29311 Protection IC to Provide Complete Pack Electronics for or 14.4-V Battery Packs with Few External Components Based on a Powerful Low-Power RISC CPU Core With High-Performance Peripherals Integrated FLASH Memory Eliminates the Need for External Configuration EEPROM Measures Charge Flow Using a High Resolution 15­Bit Integrating Converter ­ Better Than 3-nVh of Resolution ­ Self-Calibrating ­ Offset Error Less Than 1-µV Uses 15-Bit Delta Sigma Converter for Accurate Voltage, Temperature, and Current Measurements Programmable Cell Modeling for Maximum Battery Fuel Gauge Accuracy Drives or 5-Segment LED Display for Remaining Capacity Indication 38­pin TSSOP (DBT) The bq2081 uses an integrating converter with continuous sampling for the measurement of battery charge and discharge currents. Optimized for coloumb counting in portable applications, the self-calibrating integrating converter has a resolution better than 3-nVh and an offset measurement error of less than 1-µV (typical). For voltage, temperature, and current reporting, the bq2081 uses a 15-bit A-to-D converter. In conjunction with the bq29311, the onboard ADC also monitors individual cell voltages in a battery pack and allows the bq2081 to generate the control signals necessary to implement the required safety protection for Li-Ion and Li-Polymer battery chemistries. The bq2081 supports the smart battery data (SBData) commands and charge control functions. It communicates data using the System Management Bus (SMBus) 2-wire protocol or the 1-wire HDQ16 protocol. The data available includes the battery's remaining capacity, temperature, voltage, current, and remaining run-time predictions. The bq2081 provides LED drivers and a push button input to depict remaining battery capacity from full to empty or 25% increments with or 5 segment display. The bq2081 contains 512 bytes of internal FLASH EPROM, whith store configuration information. The information includes nominal capacity and voltage, self­discharge rate, rate compensation factors, and other programmable cell­modeling factors used to accurately adjust remaining capacity for use­conditions based on time, rate, and temperature. The bq2081 also automatically calibrates or learns the true battery capacity in the course of a discharge cycle from programmable near full to near empty levels. The bq29311 protection IC provides power to the bq2081 from or 4 series Li-Ion cell stack, eliminating the need for an external regulator circuit.

DESCRIPTION

The bq2081 SBS Compliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in Li-Ion or Li-Polymer batteries. The bq2081 monitors capacity and other critical parameters of the battery pack and reports the information to the system host controller over a serial communication bus. It is designed to work with the bq29311 protection IC to maximize functionality and safety and minimize component count and cost in smart battery circuits.

PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.

TERMINAL NAME CLKOUT DISP FILT HDQ16 INT LED4 LED5 MRST N/C No. I/O I I/O Master reset input that forces the device into reset when held high No connection Analog input for auto ADC offset compensation. Register backup that provides backup potential to the bq2081 registers during periods of low operating voltage. RBI accepts a storage capacitor or a battery input. Communication clock to the bq29311 Data transfer to and from bq29311 SMBus clock open-drain bidirectional pin used to clock the data transfer to and from the bq2081 SMBus data open-drain bidirectional pin used to transfer address and data to and from the bq2081 Connections for a small-value sense resistor to monitor the battery y chargeg and discharge-current g flow Thermistor voltage input connection to monitor temperature Positive supply for analog circuitry Positive supply for digital circuitry and I/O pins Single cell voltage input from the bq29311 Negative supply for analog circuitry Negative supply for digital circuitry Negative supply for output circuitry 32.768kHz crystal oscillator input pin 32.768kHz crystal oscillator output pin 32.768-kHz output to the bq29311 Display control for the LED drivers LED1 through LED5 Serial memory clock for data transfer between the bq2063 and the external nonvolatile configuration memory Serial communication open-drain bidirectional communications port Safety interrupt from the bq2081 LED display y segments g that each may y drive an external LED DESCRIPTION

OC RBI SCLK SDATA SMBC SMBD SR2 TS VDDA VDDD VIN VSSA VSSD VSSP XCK1 XCK2
AVAILABLE OPTIONS PART NUMBER bq20811DBT PACKAGE (38-PIN TSSOP) Standard device
absolute maximum ratings over operating free-air temperature (unless otherwise noted)

Supply voltage range, VDD relative to VSS (see Note 6 V Open-drain I/O pins, V(IOD) relative to VSS (see Note 6 V Input voltage range to all other pins, VI relative to VSS (see Note V to VDD + 0.3V Operating free-air temperature range, TA. to 70°C Storage temperature range, Tstg. to 150°C

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE: 1: VSS refers to the common node of V(SSA), V(SSD), and VSS.

PARAMETER VDD IDD I(SLP) VI(OLS) V(IL) VIH VOL V(ILS) V(IHS) V(AI) I(RB) V(RBI) Z(AI1) Z(AI2) Supply voltage Operating current Low-power storage mode current Output voltage low: (LED1­LED5) Input voltage low DISP Input voltage high DISP Output voltage low SMBC, SMBD, HDQ16, SDATA, SCLK Input voltage low SMBC, SMBD, HDQ16, SDATA, SCLK Input voltage high SMBC, SMBD, HDQ16, SDATA, SCLK Input voltage range VIN, TS, OC RBI data-retention input current RBI data-retention voltage Input impedance SR1, SR2 Input impedance VIN, TS, V­1.0 V V(RBI) 3 V, VCC 10 8 IOL ­0.3 1.7 VSS 0.3 10 I(OLS) ­0.3 2 TEST CONDITIONS MIN 3.0 TYP VCC MAX 3.6 UNIT V M

PARAMETER V(SR) V(SROS) INL TEST CONDITIONS MIN TYP MAX 1.0 UNIT V µV Input voltage range, V(SR2) and VSR ­ V(SR1) Input offset Integral nonlinearity error


 

Some Part number from the same manufacture International Components Corp.
BQ2092 Multi-chemistry SBS 0.95 Compliant Gas Gauge With 4 Led Drivers
BQ2110 Nicd/nimh Gas Gauge With 1-wire (dq) Interface And 5 Led Drivers
BQ2112 Nicd/nimh Gas Gauge With 1-wire (dq) Interface, 5 Led Drivers And Slow-charge Control
BQ2150 Li-ion Gas Gauge With 1-wire (dq) Interface And 5 Led Drivers
BQ2150H Li-ion Gas Gauge With High-speed 1-wire (hdq) Interface And 5 Led Drivers
BQ219xL Multi-chemistry Smart Battery System (sbs) 1.0 Compliant Gas Gauge With 4 Led Drivers
BQ24001 Li-ion Linear (4.1v & 4.2v) ic For One-cell Applications W/integrated Fet, One Led
BQ24004 Li-ion Linear (8.2v & 8.4v) ic For Two-cell Apps W/integrated Fet, One Led
BQ24007 Single-cell Li-ion Charger For Pdas/internet Appliances, Integrated Fet, Led
BQ24201 Complete Single-chip Li-ion
BQ24700 Battery Charger Controller And Selector With DPM
BQ2954 Li-ion Switchmode ic
SC1032-002 1-cell, Lithium-ion SaFETy Circuit
SC1032-003 1-cell, Lithium-ion SaFETy Circuit, End Cap Version
SC1032-005 1-cell, Lithium-ion SaFETy Circuit, Miniature Version
SC2033-005 2-cell, Lithium-ion SaFETy Circuit, 4.3v Threshold Voltage
SC2073-003 2-cell, Lithium-ion SaFETy Circuit
SC3072-002 3-cell, Lithium-ion SaFETy Circuit, 2-sided PCBa
SC4072-002 4-cell, Lithium-ion SaFETy Circuit, 2-sided PCBa
STL1033-001 One Cell Li-ion Charge Board With Integrated SaFETy Circuiting.
UC2906 Lead-acid Linear ic
Same catergory

BMR-0101 : System Reset ic. DIMENSIONS BMR °©0101 is the low reset type of IC that guarantee set to again micro computers or logic systems by detecting the intermittent of fluctuating power supply voltage during normal use or switching on/off of the equipments. A comparator type of hysteresis transistor developed by KODENSHI is built in the IC,so that BMR°©0101 is very cost effective.

BP5068A : . Parameter Input voltage Output current ESD endurance Operating temperature range Storage temperature range Symbol Vi Io Vsurge Topr Tstg Limits Unit V mApk kV °C Symbol Min. Parameter Input voltage range -162 Vi Output voltage Vo -13 Output current Io 0 Line regulation Vr - Load regulation Vl - Output ripple voltage Vp - Power conversion effciency 65 Typ.

CS51227 : Voltage Mode PWM Controllers. Enhanced Voltage Mode PWM Controller. The is a fixed frequency, single output PWM controller using feed forward voltage mode control. Feed forward control provides superior line regulation and line transient response. This PWM controller has been optimized for high frequency primary side control operation. It has undervoltage lockout with 4.7 V start up voltage and 75 µA start up current.

L6353 : Power Controllers & Motor Drivers. Smart Driver For Power MOS & Igbt. PEAK HIGH OUTPUT CURRENT CAPABILITY (+8A) WIDE SUPPLY VOLTAGE RANGE TO ­7.5V NEGATIVE BIAS VOLTAGE SUPPLY RANGE OVER CURRENT AND DESATURATION PROTECTION OF THE EXTERNAL POWER DEVICE (EXTERNALLY PROGRAMMABLE) LATCH-UP PROTECTION (FOR IGBT) TWO STEPS TURN-ON (PROGRAMMABLE) PROTECTION AGAINST POSITIVE SUPPLY UNDER-VOLTAGE INPUT COMPATIBLE WITH OPTOCOUPLER.

LT1613 : SEPIC. LT1613, 0.55A, 1.4MHz, Single Cell DC/DC Converter in 5-Lead SOT-23.

M51996AFP : . M51996A is the primary switching regulator controller which is especially designed to get the regulated DC voltage from AC power supply. This IC can directly drive the MOS-FET with fast rise and fast fall output pulse and with a large-drive totempole output. Type M51996A has the functions of not only high frequency OSC and fast output drive but also.

MM1210 : Remaining Battery Power Display. This IC detects battery voltage and displays the remaining power in the battery using an LCD. Long life and light weight are emphasized in the most recent portable equipment, which increasingly use nickel cadmium and nickel hydrogen batteries. For these batteries, the discharge characteristics mean that extremely precise detection of the remaining battery.

S-1170 : = RR 70dB 800mA Output ;; Input Voltage = 2.0-6.5V ;; Output Voltage = 1.5-5.5V ;; Output Current = 800 ma ;; Accuracy = ±1% ;; Current Consumption Typ. = 80 µA ;; Current Consumption Standby = 0.1 µA ;; Dropout Voltage = 120mV @300mA ;; Condition = Vout=3.0V, Vin=4V ;; Package (Power Dissipation) = SOT-89-5 (500mW) 6-pin HSON(A) (500mW).

TA7900S : 5v Voltage Regulator With Watchdog Timer.

TCL1584 : 7a / 5a / 4.6a / 3a, Fast Response, Low Dropout Positive Linear Voltage Regulators.

TPS3307-18MDREP : ti TPS3307-18-EP, Military Enhanced Plastic Triple Processor Supervisors.

X4005 : Cpu Supervisor. Selectable watchdog timer --Select 600ms, 1.4s, off Low VCC detection and reset assertion --Five standard reset threshold voltages nominal 2.68V, 1.75V --Adjust low VCC reset threshold voltage using special programming sequence --Reset signal valid to VCC = 1V Low power CMOS --12µA typical standby current, watchdog on --800nA typical standby current.

X40430 : Triple Voltage Monitoring Cpu Supervisor With Power-on-reset, Low Voltage Reset, Watchdog Timer, Fault Detection Register, Manual Reset Input, Lowline Output.X40430 Active High ResetX40431 Active Low Reset.

MAX6870 : EEPROM-Programmable Hex/Quad Power-Supply Sequencers/Supervisors with ADC The MAX6870/MAX6871 EEPROM-configurable, multivoltage supply sequencers/supervisors monitor several voltage detector inputs, two auxiliary inputs, and four general-purpose logic inputs. The MAX6870/MAX6871 feature programmable outputs for highly configurable power-supply sequencing.

IPS6031PBF : Intelligent Power Switch 1 Channel High Side Driver in a TO-220 Package.

FSBB30CH60B : Smart Power Module t is an advanced smart power module (SPM™) that Fairchild has newly developed and designed to provide very compact and high performance ac motor drives mainly targeting lowpower inverter-driven application like air conditioner and washing machine. It combines optimized circuit protection and drive matched to low-loss IGBTs. System.

LTC3565 : 1.25A, 4MHz, Synchronous Step-Down DC/DC Converter The LTC3565 is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input voltage range and has a user configurable operating frequency up to 4MHz, allowing the use of tiny, low cost capacitors and inductors 1mm or less.

LTC3868-1 : Low IQ, Dual 2-Phase Synchronous 2-Phase Synchronous Step-Down Controller The LTC3868-1 is a high performance dual step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phase-lockable frequency of up to 850kHz. Power loss and noise due to the input.

CM2830GXIN92 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 Ă‚µA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 Ă‚µF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z