|Category||RF & Microwaves => Amplifiers => Power Amplifiers => LNAs|
|Description||GSM RF ic Power Amplifiers, 890-915 MHZ|
|Datasheet||Download CMM0335-AK datasheet
Vg1 3 GND Vd1 8 N/C Back plane is ground and must be soldered to thermally conductive ground plane.
Features t 55% Power Added Efficiency t 35 dBm Output Power t Low Harmonic Distortion t Low Cost, SO-8 Surface Mount Package 34 dB Gain Applications t GSM Class IV Cellular Handsets t 900 MHz ISM Products t SMR RadioDescription
The is a highly efficient, 6V power amplifier intended for use in portable cellular handsets and datacom products operating in the SMR, GSM and 902928 MHz ISM bands. As a pin-compatible member of the new Triniti DXTM amplifier family, the CMM0335 offers maxi-
mum performance and flexibility.The CMM0335 is packaged in a low-cost, space efficient SO-8 power package that gives excellent electrical stability and thermal handling performance with R of less than 18° C/W. The part is designed to require minimal external circuitry for bias matching, simplifying design and keeping board space and cost to a minimum.Parameter Rating Parameter Rating Parameter Rating
Drain Voltage (+Vd) Drain Current (Id) RF Input Power DC Gate Voltage (-Vg)
Power Dissipation Thermal Resistance Storage Temperature
Operating Temperature Channel Temperature Soldering Temperature
* Max (+Vd) and (-Vg) under linear operation. Max potential difference across the device in RF compression (2Vd + |-Vg|) not to exceed the minimum breakdown voltage (Vbr) of +18V.
Unless otherwise specified the following specifications are guaranteed at room temperature with drain voltage (+Vd) 5.8 V and PIN = +8 dBm, in Celeritek test fixture.
Frequency Range Pout Efficiency Gain Harmonics Return Loss Negative Supply Current Supply Current Quiescent Current
PIN = +8 dBm 35 dBm output meeting GSM template 2nd @ Pout = +34.5 dBm 3rd @ Pout = +34.5 dBm In Celeritek test fixture No RF
Description RF input Ground Input stage gate bias Output stage gate bias RF output and Vd2. External matching circuit required RF output and Vd2. External matching circuit required Input stage drain bias Ground this pin
The CMM0335 is available in a surface mount SO-8 power package and devices are available in tape and reel. Part Number for Ordering CMM0335-AK CMM0335-AK-000T Package SO-8 surface mount power package SO-8 surface mount power package in tape and reel
Celeritek reserves the right to make changes without further notice to any products herein. Celeritek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Celeritek assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Celeritek does not convey any license under its patent rights nor the rights of others. Celeritek products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Celeritek product could create a situation where personal injury or death may occur. Should Buyer purchase or use Celeritek products for any such unintended or unauthorized application, Buyer shall indemnify and hold Celeritek and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Celeritek was negligent regarding the design or manufacture of the part. Celeritek is a registered trademark of Celeritek, Inc. Celeritek, Inc. is an Equal Opportunity/Affirmative Action Employer.3236 Scott Boulevard, Santa Clara, California 95054 Phone: (408) 986-5060 Fax: (408) 986-5095
|Related products with the same datasheet|
|Some Part number from the same manufacture Celeritek|
|CMM0335-AK-000T GSM RF ic Power Amplifiers, 890-915 MHZ|
|CMM0336 Cellular RF ic Mmic Power Amplifiers, 824-928 MHZ|
|CMM1321 PCS RF ic Mmic Power Amps, 1.85-1.91 GHZ|
|CMM1335 GSM RF ic Power Amplifiers, 1.7-1.91 GHZ|
|CMM1430-KU ku Band Products, 13.75-14.5 GHZ|
|CMM1530 PCS RF ic Mmic Power Amps, 1.85-1.91 GHZ|
|CMM2030-BD Fiber Optic Driver Amplifier, 30 KHZ to 30 GHZ|
|CMM2032-BD Fiber Optic Driver Amplifier, 30 KHZ to 32 GHZ|
|CMM2301 Ism Band Mmic Power Amplifier, 2.3-2.5 GHZ|
|CMM2305 Cellular RF ic Mmic Power Amplifiers, 800-2700 MHZ|
|CMM2311 Ism Band RF ic Products, 800-2700 MHZ|
|CMM2321 Ism Band RF ic Products, 2.4-2.5 GHZ|
|CMM3020-BD Fiber Optic Driver Amplifier, 20 KHz-20 GHZ|
|CMM3030-BD Fiber Optic Driver Amplifier, 30 KHz-30 GHZ|
CMM1321-AK-000T : PCS RF ic Mmic Power Amps, 1.85-1.91 GHZ
CMM2308 : Cellular RF ic Mmic Power Amplifiers, 800-2700 MHZ
NE677M04 : NEC's NE677M04 is fabricated using NEC's HFT3 wafer process. With a transition frequency of 15 GHz, the NE677M04 is usable in applications from 100 MHz to 3 GHz. The NE677M04 provides P1dB of 15 dBm, even with low voltage and low current, making this device an excellent choice for the driver st
NESG3031M05 : NPN SiGe RF Transistor For Low Noise, High-Gain Amplification Flat-Lead 4-PIN Thin-Type Super Minimold FEATURES • The device is an ideal choice for low noise, high-gain amplification NF = 0.6 dB TYP., Ga = 16.0 dB TYP. @ VCE = 2 V, IC = 6 mA, f = 2.4 GHz NF = 0.95 dB TYP., Ga = 10.0 dB TYP. @ VC
UPG2022TB : NEC's 4.8 to 5.85 GHz High Power GaAs MMIC SPDT Switch NEC's UPG2022TB is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion loss. It is housed in a compact, lead free 6-pin super minimold package.
PS9821-1 : NEC's High CMR, 15 Mb/s 3.3V Open Collector Output Type SO8 Optocoupler
PS710EL-1A-E3 : NEC's 6 PIN DIP 0.08 ohms Low On-State Resistance 2.0 A Continuous Load Current 1-CH Optical Coupled MOSFET The PS710E-1A and PS710EL-1A are solid state relays containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load
PS7801D-1A-F3 : NEC's 4-PIN Ultra Small Flat-Lead Low Output Capacitance (0.6 pF), 1-CH Optical Coupled MOSFET The PS7801D-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side.
PS7801E-1A : 4-Pin Ultra Small Flat-Lead, Low C x R, 1-ch Optical The PS7801E-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side.