Details, datasheet, quote on part number: A477-10
PartA477-10
CategoryTiming Circuits => Delay Lines
DescriptionLow Voltage 10 Tap Leading Edge Control, CMOS Active
CompanyBel Fuse Incorporated
DatasheetDownload A477-10 datasheet
  

 

Features, Applications

10 TAP LEADING EDGE CONTROL LOW VOLTAGE DELAY MODULES

SMD S477-0200-10 S477-0250-10 Thru-Hole Total Delay per Tap 2.5 ns Rise Time 3 ns Ein Trin PW PP Iccl Vcc

Pulse Voltage Rise Time Pulse Width Pulse Period Supply Current Supply Voltage 3.0 Volts 1.2 x Total Delay 4 x Pulse Width 30 ma Typical 3.3 Volts

Vcc Vih Vil Iik Ioh Iol Voh Vol Vik Iih Iil Icch Iccl d Tc Supply Voltage Logic 1 Input Voltage Logic 0 Input Voltage Input Clamp Current Logic 1 Output Current Logic 0 Output Current Logic 1 Output Voltage Logic 0 Output voltage Input Clamp Voltage Logic 1 Input Current Logic 0 Input Current Logic 1 Supply Current Logic 0 Supply Current Operating Free Air Temperature Min. Input Pulse Width of Total Delay Maximum Duty Cycle Min. 3.0 2.4 Max. 70o 50 Units C %

Input to Taps % , Whichever is Greater Tap to Tap or 7%, Whichever is Greater Delays measured @ 50% levels on Leading Edge only with no loads on Taps Rise and Fall Times measured from to 90% levels * Ref. Delay from P13, Delay 5.5 ns typical

Nh Logic 1 Fanout Nl Logic 0 Fanout 10 LSTTL Loads Max. 10 LSTTL Loads Max.
Temp. Coeff. of Total Delay (TD) + (25000/TD) PPM/OC

Transfer molded for better reliability Compatible with TTL & CMOS circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed SMD - Tape & Reel available: 32mm Wide x 16mm Pitch, 500 pieces per 13" reel

Other Delays and Tolerances Available Consult Sales

Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com

Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706

European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366


 

Some Part number from the same manufacture Bel Fuse Incorporated
A477-A3 Low Voltage Triple Line Leading Edge Control, CMOS Active
A493-02 Precise 5 Tap Leading Edge Control, TTL Active
A493-06 Precise 1 Tap Leading Edge Control, TTL Active
A493-A3 Precise Triple Line Leading Edge Control, TTL Active
A497-02 Precise 5 Tap Leading Edge Control, TTL Active
A497-06 Precise 1 Tap Leading Edge Control, TTL Active
A497-10 Precise 10 Tap Leading Edge Control, TTL Active
A497-A3 Precise Triple Line Leading Edge Control, TTL Active
A553-0716-00 Transformers Only Module, 10Base-T
A553-0756-AB Aui ISOlation Transformers, 10Base-T
A553-1506-6E XFMR Module, Token Ring
A553-1506-AB Aui ISOlation Transformers, 10Base-T
A553-5006-KE XFMR Module, Token Ring
A553-5999-47 Transformers Only Module, 10Base-T
A556-2006-00 Filter Module W/out Resistor Network, 10Base-T
C1Q
C2Q
GSA
GSAP
L811-1X1T-03
MQ

2771G : T1/E1 Transformer Hardened, High Freq T1/E1

S7AH-10J120 : Non-isolated Dc/dc Converters 3.0v-5.5v Input 1.0v-3.3v/12a Output

C850-2B4R-C3 : DATACOM TRANSFORMER FOR Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER

G2PW1V560PERT004 : 1-OUTPUT DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, ROHS COMPLIANT PACKAGE-8 ; Output Voltage: 1.05 to 1.65 volts ; Input Voltage: 36 to 75 volts ; Operating Temperature: -40 to 100 C (-40 to 212 F)

SI-50201-F : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S) Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer

SI-50215 : DATACOM TRANSFORMER FOR GENERAL PURPOSE APPLICATION(S) Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer

SI-61016-F : DATACOM TRANSFORMER FOR Specifications: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER

V7AH-07A1A0G : 1-OUTPUT 23.1 W DC-DC REG PWR SUPPLY MODULE Specifications: Package Type: Other, ROHS COMPLIANT PACKAGE-5 ; Output Voltage: 0.9000 to 3.3 volts ; Input Voltage: 10 to 14 volts ; Output Power: 23.1 watts (0.0310 HP)

Same catergory

A166A : Crystal 32.000000mhz.

CD82C284-12 : Clock Generator And Ready Interface For 80c286 Processors. The Intersil is a clock generator/driver which provides clock signals for 80C286 processors and support components. It also contains logic to supply READY to the CPU from either asynchronous or synchronous sources and synchronous RESET from an asynchronous input with hysteresis. Generates System Clock for 80C286 Processors Generates System Reset Output.

CDC392 : General Purpose/. 1-to-6 Clock Driver Select Polarity 3-s. TO 6-LINE CLOCK DRIVER WITH SELECTABLE POLARITY AND 3-STATE OUTPUTS Low Output Skew for Clock-Distribution and Clock-Generation Applications TTL-Compatible Inputs and CMOS-Compatible Outputs Distributes One Clock Input to Six Clock Outputs Polarity Control Selects True or Complementary Outputs Distributed VCC and GND Pins Reduce Switching Noise High-Drive.

CGS701ATV : General Purpose/. Commercial, Industrial Low Skew PLL 1 to 8 CMOS Clock Driver.

CHV2242A-99F/00 : Q-band Vco Based on Ku-band Oscillator And Q-band Multiplier. Q-band VCO based on Ku-band Oscillator and Q-band Multiplier The is a monolithic multifunction for frequency generation. It integrates a Ku-band oscillator with frequency control (VCO), a Qband frequency multiplier and buffer amplifiers. For performance optimisation, two external ports (ERC1 and ERC2) allow a passive resonator coupling to the oscillator.

CY2DP3120 : Backplane Interface. High Performance Clock Distribution Device. Twenty ECL/PECL differential outputs Two ECL-/PECL-/HSTL-compatible differential clock inputs Hot-swappable/-insertable 50-ps output-to-output skew 500-ps device-to-device skew Less than 10-ps intrinsic jitter < 500-ps propagation delay (typical) Operation from to 1.5 GHz PECL mode supply range: VCC to 3.465V with VEE = 0V ECL mode supply range:.

FE : Quartz Crystals. 7.5 X 5mm Ceramic Resin Sealed SMD. Low Cost High Frequency Range Fundamental to 50 MHz (BT Cut) Resin Sealed Tape and Reel (2,000 pcs. STD) Pb Free OPTIONS Tolerances < 20 PPM Stabilities < 15 PPM Temperatures +85ēC 1.4mm Height Max 2 Additional Footprints (FH, FL) PARAMETERS Frequency Range Frequency Tolerance @ 25ēC Frequency Stability, ref @ 25ēC Over Operating Temp Range Temperature.

ICS9148-13 : Frequency Generator & Integrated Buffers For Pentium(tm). The ICS9148-13 generates all clocks required for high speed RISC or CISC microprocessor systems such as Intel Pentium and PentiumPro. An output enable is provided for testability. Spread Spectrum is available to modulate the CPU and BUS PLL (leaving the REF, 24, 48 MHz operating normally). The SS_EN# pin enables the spreading when low. The SS_TYPE pin choses.

K1526D : Package = 9 X 14 MM J-lead ;; Frequency = 2.000 to 160.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt.

K1570AQA : Package = 14 Pin Gull Wing ;; Frequency = 1.000 to 52.000 MHZ ;; Output Logic = CMOS/ttl ;; Supply Voltage = 5.0 Volt.

M6027 : TCXO/TCVCXO. Package = 3.2 X 5 MM Leadless ;; Frequency = 12.600 to 26.000 MHZ ;; Output Logic = Clipped Siave ;; Supply Voltage = 3.0 Volt.

M624 : SAW-Based clock modules. Voltage Controlled Saw Oscillator (VCSO). The Surface Mount Technology (SMT) Voltage Controlled SAW Oscillator (VCSO) is specifically designed for high speed SONET/SDH OC-192 and OC-768 applications. This SMT VCSO is SAW-based and offers excellent phase noise performance and spectral purity, while requiring a low supply voltage (+3.3Vdc). An extremely linear tuning range makes the SMT VCSO.

M7S : Package = 9 X 14 MM J-lead ;; Frequency = 1.000 to 125.000 MHZ ;; Output Logic = Hcmos/ttl ;; Supply Voltage = 5.0 Volt.

MXO5030 : Package = 38.9 X 38.9 X 13.5 MM Dip ;; Frequency = 10 MHZ ;; Output Logic = Hcmos/siave ;; Supply Voltage = +12 VDC +/-5% Osc (+14 V +/- 1.5V Oven) ;; App Notes = PDF ;; E- Brochure = PDF.

PCF8583 : Clock Circuits. PCF8583; Clock/calendar With 240 X 8-bit RAM;; Package: SOT176-1 (SO8), SOT97-1 (DIP8), Uncased Die.

PLL602-10 : XO crystal oscillators. , 12 - 24MHz In, 96 - 400MHz Out, CMOS, Pecl, LVDS.

SF1062A : SAW Resonators. Frequency = 211.0 ;; = Filter, Gsm/dcs/pcs Receiver if.

TFS230 : SAW Devices (Surface Acoustic Wave). Application = Umts ;; Center Frequency = 230.0 MHZ ;; 3 DB = 3.9 MHZ * ;; Pass Band Ripple = 1.2dB ;; Insertion Loss = 14.5dB ;; Group Delay Ripple = 150ns ;; Package = 11 MM X 5 MM LCC.

VM6S : Crystal Oscillators. Parameter Frequency Range Frequency Tolerance Frequency Stability Operating Temperature Range Storage Temperature Range OPTIONS Note: Please reference "Building a Part Number" on page 36 if the desired is not found in the "Standard Crystal Part Number Chart" on pages 13­14. All s are subject to change without notice. .

ISL54105 : TMDS Regenerator The ISL54105 is a high-performance TMDS timing regenerator containing a programmable equalizer and a clock data recovery (CDR) function for each of the 3 TMDS pairs in an HDMI or DVI signal. The TMDS data outputs of the ISL54105 are regenerated and perfectly aligned to the regenerated TMDS clock signal, creating an extremely clean,.

 
0-C     D-L     M-R     S-Z