Details, datasheet, quote on part number: A42MX36-C
PartA42MX36-C
CategoryFPGAs/PLDs => FPGA (Field Programmable Gate Array)
Description
CompanyActel Corporation
DatasheetDownload A42MX36-C datasheet
  

 

Features, Applications

Single-Chip ASIC Alternative to 54,000 System Gates to 2.5 kbits Configurable Dual-Port SRAM Fast Wide-Decode Circuitry to 202 User-Programmable I/O Pins 5.6 ns Clock-to-Out 250 MHz Performance 5 ns Dual-Port SRAM Access 100 MHz FIFOs ns 35-Bit Address Decode

Commercial, Military Temperature and MIL-STD-883 Ceramic Packages QML Certification Ceramic Devices Available to DSCC SMD

Mixed Voltage Operation or 3.3V I/O) Synthesis-Friendly Architecture to Support ASIC Design Methodologies to 100% Resource Utilization and 100% Pin Fixing Deterministic, User-Controllable Timing Unique In-System Diagnostic and Verification Capability with Silicon Explorer II Low Power Consumption IEEE Standard 1149.1 (JTAG) Boundary Scan Testing 5.0V and 3.3V Programmable PCI-Compliant I/O

Commercial, Industrial, and Military Temperature Plastic Packages

Clock-to-Out SRAM Modules or 32x8) Dedicated Flip-Flops Maximum Flip-Flops Clocks User I/O (Maximum) PCI Boundary Scan Test (BST) Packages (by pin count)

PLCC PQFP VQFP TQFP CQFP PBGA

Actel's 40MX and 42MX families provide a high-performance, single-chip solution for shortening the system design and development cycle, offering a cost-effective alternative to ASICs. The 40MX and 42MX devices are excellent choices for integrating logic that is currently implemented in multiple PALs, CPLDs, and FPGAs. Example applications include high-speed controllers and address decoding, peripheral bus interfaces, DSP, and co-processor functions. The MX device architecture is based on Actel's patented antifuse technology implemented a 0.45µ triple-metal CMOS process. With capacities ranging from to 54,000 system gates, the synthesis-friendly MX devices provide performance to 250 MHz, are live on power-up, and require up to five times lower stand-by power consumption than any other FPGA device. Actel's MX FPGAs provide to 202 user I/Os and are available in a wide variety of packages and speed grades. Actel's 42MX devices also feature MultiPlex I/Os, which support mixed voltage systems, enable programmable PCI, deliver high-performance operation at both 5.0V and 3.3V, and provide a low-power mode. The MX PCI-Compliant devices are fully compliant with the PCI Local Bus Specification (version 2.1). They deliver 200

MHz on-chip operation and 6.1 ns clock-to-output performance with capacities spanning from to 54,000 system gates. MX devices comply 100 percent to the electrical and timing specifications detailed in the PCI specification. However, as with all programmable logic devices, the performance of the final product depends upon the user's design and optimization techniques. The MX24 and MX36 devices also include system-level features such as IEEE Standard 1149.1 (JTAG) Boudary Scan Testing, dual-port SRAM, and fast wide-decode modules. The A42MX36 device offers dual-port SRAM for implementing fast FIFOs, LIFOs, and temporary data storage. The large number of storage elements can efficiently address applications requiring wide datapath manipulation and can perform transformation functions such as those required for telecommunications, networking, and DSP. All products in the 40MX and 42MX families are available 100 percent tested over the military temperature range. In addition, the largest member of the family, the A42MX36, is available in both CQ208 and CQ256 ceramic packages screened to MIL-STD-883 levels. For easy prototyping and conversion from plastic to ceramic, the CQ208 and PQ208 devices are pin compatible.

Application (Temperature Range) Blank = Commercial I = Industrial M = Military = MIL-STD-883 Package Lead Count Package Type PL = Plastic Leaded Chip Carrier PQ = Plastic Quad Flat Pack TQ = Thin (1.4 mm) Quad Flat Pack VQ = Very Thin (1.0 mm) Quad Flat Pack BG = Ball Grid Array CQ = Ceramic Quad Flat Pack Speed Grade Blank = Standard Speed ­1 = Approximately 15% Faster than Standard ­2 = Approximately 25% Faster than Standard ­3 = Approximately 35% Faster than Standard ­F = Approximately 40% Slower than Standard Part Number A42MX36= 3,000 System Gates 6,000 System Gates 14,000 System Gates 24,000 System Gates 36,000 System Gates 54,000 System Gates

Speed Grade* Std A40MX02 Device 44-Pin Plastic Leaded Chip Carrier (PLCC) 68-Pin Plastic Leaded Chip Carrier (PLCC) 100-Pin Plastic Quad Flat Pack (PQFP) 80-Pin Very Thin Plastic Quad Flat Pack (VQFP) A40MX04 Device 44-Pin Plastic Leaded Chip Carrier (PLCC) 68-Pin Plastic Leaded Chip Carrier (PLCC) 84-Pin Plastic Leaded Chip Carrier (PLCC) 100-Pin Plastic Quad Flat Pack (PQFP) 80-Pin Very Thin Plastic Quad Flat Pack (VQFP) A42MX09 Device 84-Pin Plastic Leaded Chip Carrier (PLCC) 100-Pin Plastic Quad Flat Pack (PQFP) 160-Pin Plastic Quad Flat Pack (PQFP) 176-Pin Thin Plastic Quad Flat Pack (TQFP) 100-Pin Very Thin Plastic Quad Flat Pack (VQFP) A42MX16 Device 84-Pin Plastic Leaded Chip Carrier (PLCC) 100-Pin Plastic Quad Flat Pack (PQFP) 160-Pin Plastic Quad Flat Pack (PQFP) 208-Pin Plastic Quad Flat Pack (PQFP) 176-Pin Thin Plastic Quad Flat Pack (TQFP) 100-Pin Very Thin Plastic Quad Flat Pack (VQFP) A42MX24 Device 84-Pin Plastic Leaded Chip Carrier (PLCC) 160-Pin Plastic Quad Flat Pack (PQFP) 208-Pin Plastic Quad Flat Pack (PQFP) 176-Pin Thin Plastic Quad Flat Pack (TQFP) A42MX36 Device 208-Pin Plastic Quad Flat Pack (PQFP) 240-Pin Plastic Quad Flat Pack (PQFP) 272-Pin Plastic Ball Grid Array (PBGA) 208-Pin Ceramic Quad Flat Pack (CQFP) 256-Pin Ceramic Quad Flat Pack (CQFP)


Contact your Actel sales representative for product availability. Applications: C = Commercial Availability: = Available *Speed Grade: I = Industrial P = Planned M = Military = Not Planned

Approx. 15% faster than Standard Approx. 25% faster than Standard Approx. 35% faster than Standard Approx. 40% slower than Standard

Only Std, ­1, ­2 Speed Grade Only Std, ­1 Speed Grade

 

Related products with the same datasheet
A40MX02-1C
A40MX02-1I
A40MX02-1M
A40MX02-2C
A40MX02-C
A40MX02-I
A40MX02-M
A40MX04
A40MX04-1C
A40MX04-2C
A40MX04-3C
A40MX04-C
Some Part number from the same manufacture Actel Corporation
A42MX36-FC
A500K Hirel Fpgas
A54SX08
APA075 Actel's 2nd Generation Reprogrammable Flash Fpgas
AX1000 Axcelerator Family of Antifuse Fpga
eX128
RH1020 Radiation-hardened Fpgas
RH1280
RT1020 Radtolerant Fpgas
RT14100A
RT1425A
RT1460A
RT54SX16 54sx Family Fpgas Radtolerant And Hirel
RT54SX32
SCC Serial Communication Controller
SX-AFamily Fpgas
A3P030 ProASIC3 Flash Family FPGAsProASIC3, the third-generation family of Actel FlashFPGAs, offers performance, density, and features beyondthose of the ProASICPLUS® family. The nonvolatile Flashtechnology
1200XL This application note provides the information needed for seamless migration of a design from the1200XL and 3200DX families to the 42MX family.The Actel 42MX device architecture is based on the Actel
AGLP030-V2CS289 Igloo PLUS Low-power Flash Fpgas with Flashfreeze Technology

A1460A-B : Fuse-based FPGA/PAL Accelerator Series Fpgas- Act(tm) 3 Family

AGLP030-V2FVQG289ES : Igloo PLUS Low-power Flash Fpgas with Flashfreeze Technology

AGLP060-V2FCSG289I : Igloo PLUS Low-power Flash Fpgas with Flashfreeze Technology

AGL060V2-FQN144I : Igloo Low-power Flash Fpgas with Flash Freeze Technology

AGL250V2-QN144ES : Igloo Low-power Flash Fpgas with Flash Freeze Technology

A42MX09-2CQ100A : 40MX and 42MX Automotive FPGA Families

A42MX16-2BG100I : 40MX and 42MX Automotive FPGA Families

EX64-PCS64 : eX Family Fpgas

APA450-FTQGI : Proasic Flash Family Fpgas

M1AGL600V5-FCS144ES : Igloo Low-power Flash Fpgas with Flash Freeze Technology

 
0-C     D-L     M-R     S-Z