|Category||Passive Components => Resistors => Current Sense Resistors => 8848906|
|Title||Current Sense Resistors - SMD .5M ohms 8W 1% AEC-Q200|
|Description||KOA Speer PSL2 Current Sense Resistors support automatic mounting and reflow soldering. These KOA Speer resistors offer a low Temperature Coefficient of Resistance (TCR) between ±175 and ±115ppm/°C. The AEC-Q200 qualified resistors feature an 8W power rating and a nominal resistance of either 0.3m? (PSL2NTEBL300F) or 0.5m? (PSL2NTEBL500F). The PSL2 series features copper terminations, a resistance tolerance of ±1% in a 2512 SMD package, and can operate in temperatures of -65 to 175°C. These power shunt current sense resistors are ideal for transportation and industrial markets in applications such as DC to DC conversion, automotive modules, motor control, and power supplies.|
|Company||KOA Speer Electronics|
|Datasheet||Download PSL2NTEBL500F datasheet
|Power Rating||8 W|
|Case Code - in||2512|
|Case Code - mm||6432|
|Packaging||Cut Tape, eel, Reel|
|Others parts numbering|
|PSL2NTEBL300F: Current Sense Resistors - SMD .3M ohms 8W 1% AEC-Q200|
features Ultra low resistance, suitable for large current sensing Automatic mounting machines are applicable Suitable for reflow soldering (Not suitable for flow soldering) Products meet EU RoHS requirements AEC-Q200 qualified
PS Type J Power Rating 2m: 6W New 8W 2 Termination Number N Termination Material N: No surface treatment TEB Packaging TEB: 8mm pitch plastic embossed L500 Nominal Resistance 4 digits: all values less than 100m are expressed in m with "L" as decimal Ex: 1L00 F Tolerance F: ±1%For further information on packaging, please refer to Appendix A.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.comPart Designation Power Rating (Current Rating) 6W (54A)
For resistors operated at a terminal part temperature of described for each size or above, a power rating shall be derated in accordance with the derating curve. Please refer to "Introduction of the derating curve based on the terminal part temperature" in the beginning of our catalog before use.
Parameter T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 75°C and Less of Terminal Part Temperature Low Temperature Exposure High Temperature Exposure Requirement R Limit Typical Within specified T.C.R. Test Method +25°C/+125°C PSJ 0.5m): 30W for 5 seconds; PSJ (1m): 20W for 5 seconds; PSJ (2m): 18W for 5 seconds; PSL 0.5m): 20W for 5 seconds 5°C, 15 seconds ± 1 second -55°C (30 minutes), +150°C (30 minutes), 1,000 cycles ± 3°C RH, 1000 hours, 10% Bias Terminal part temperature: 3°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle -65°C, 1000 hours +175°C, 1,000 hours
|Some Part number from the same manufacture KOA Speer Electronics|
|PSL2NTEBL300F KOA Speer PSL2 Current Sense Resistors support automatic mounting and reflow soldering. These KOA Speer resistors offer a low Temperature Coefficient of Resistance (TCR) between ±175 and ±115ppm/°C.|